oaLdCardLoopBack
OADWDM-MIB ·
.1.3.6.1.4.1.6926.1.41.3.1.1.17
Object
column
mandatory
r/w
Enumeration
Transponder LoopBack state. Indicates the transponder LoopBack state. 2 - normal - Transponder card is in non-loopback state 3 - loopback - Transponder card is in loopback state 4 - remoteLoopback - Transponder card is in remote loopback state 5 - localLoopback - Transponder card is in local loopback state Note: options 4 and 5 are available for TM-DXFP card.
Context
- MIB
- OADWDM-MIB
- OID
.1.3.6.1.4.1.6926.1.41.3.1.1.17- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- oaLdCardsStatEntry
- Table
- oaLdCardsStatTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | normal |
3 | loopback |
4 | remoteLoopback |
5 | localLoopback |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaLdCardIndex mandatory The slot#. An index from 1 to The number of slots. | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.1 |
| oaLdCardRateSelect mandatory Transponder Rate Select.
Indicates the transponder rate.
oc48, stm16 and fiberChannel2125 are for card EM2009-CH
and EM2009-DH only.
sonetSdh10giga and fiberChannel10giga are for … | column | RateSelect | .1.3.6.1.4.1.6926.1.41.3.1.1.10 |
| oaLdCardRateMode mandatory Transponder Rate Mode.
Indicates the transponder rate mode.
2 - Automatic - Rate is set by software
3 - Manual - Rate is set by DIP switches on board
If manual, oaLdCardRateSelect… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.11 |
| oaLdCardLaserMode mandatory Transponder Laser Mode.
Indicates the transponder laser mode.
2 - Enable - Laser is enabled
3 - Disable - Laser is disabled (can not transmit) | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.12 |
| oaLdCardWdmRxPm mandatory Transponder WDM receiver optical power.
Indicates the optical power in dBm.
To calculate the power use the equation P(dBm)=oaLdCardWdmRxPm/2,
when oaLdCardWdmRxPm is a signed num… | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.15 |
| oaLdCardWdmTxPm mandatory Transponder WDM transmitter optical power.
Indicates the optical power in dBm.
To calculate the power use the equation P(dBm)=oaLdCardWdmTxPm/2,
when oaLdCardWdmTxPm is a signed … | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.16 |
| oaLdCardRedundantState mandatory Transponder Redundant Mode.
Indicates the transponder redundant mode.
2 - normal - Transponder is in non-redundant mode
3 - redundant - Transponder is in redundant mode | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.18 |
| oaLdCardPrimaryState mandatory Transponder Primary/Secondary State.
Indicates the transponder Primary/Secondary status.
2 - secondary - Transponder is in secondary state and is not active
3 - primary - Transp… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.19 |
| oaLdCardType mandatory The Card's type | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.2 |
| oaLdCardFPGARev mandatory The Card's FPGA Revision | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.20 |
| oaLdCardPartNumber mandatory The Card's Part Number (maximum 15 symbols). | column | OctetString | .1.3.6.1.4.1.6926.1.41.3.1.1.21 |
| oaLdCardSerialNumber mandatory The Card's Serial Number (10 digits). | column | OctetString | .1.3.6.1.4.1.6926.1.41.3.1.1.22 |
| oaLdCardHwRev mandatory The Card's Hardware Revision | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.23 |
| oaLdCardOptAccTx mandatory Slot optic access Tx indication.
Indicates the optic access Transmit status
2 - Transmit On
3 - Transmit Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.24 |
| oaLdCardOptDwdmTx mandatory Slot optic DWDM Tx indication.
Indicates the optic DWDM Transmit status
2 - Transmit On
3 - Transmit Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.25 |
| oaLdCardTemp mandatory The Module Temperature (in units of 1/10 Degrees Celsius [0.1 C]) | column | Integer32 | .1.3.6.1.4.1.6926.1.41.3.1.1.26 |
| oaLdCardSubType mandatory The Card's subtype | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.27 |
| oaLdCardRev mandatory The Card's Revision | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.3 |
| oaLdCardLambdaCh mandatory The Card's Lambda channel | column | LambdaCh | .1.3.6.1.4.1.6926.1.41.3.1.1.4 |
| oaLdCardOptAccRx mandatory Slot optic access Rx indication.
Indicates the optic access Receive status
2 - Receive On
3 - Receive Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.5 |
| oaLdCardOptDwdmRx mandatory Slot optic DWDM Rx indication.
Indicates the optic DWDM Receive status
2 - Receive On
3 - Receive Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.6 |
| oaLdCardDwdmLaserTx mandatory Slot DWDM Laser Tx Fail indication.
Indicates the DWDM Laser Transmit status
2 - Transmit OK
3 - Transmit Fail | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.7 |
| oaLdCardLaserTemp mandatory Slot Laser Temperature indication.
Indicates the Laser Temperature status
2 - Temperature Normal
3 - Temperature High | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.8 |
| oaLdCardAmbientTemp mandatory Slot Ambient Temperature indication.
Indicates the Ambient Temperature status
2 - Temperature Normal
3 - Temperature High | column | Enumeration | .1.3.6.1.4.1.6926.1.41.3.1.1.9 |