oaLdCardEntityStandard
OADWDM-MIB ·
.1.3.6.1.4.1.6926.1.41.4.1.1.23
Object
column
mandatory
r/w
Enumeration
OCM Module Standard Mode. Indicates the Module Standard. 2 - sonet - Module in SONET standard mode 3 - sdh - Module in SDH standard mode
Context
- MIB
- OADWDM-MIB
- OID
.1.3.6.1.4.1.6926.1.41.4.1.1.23- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- oaLdCardEntityStatEntry
- Table
- oaLdCardEntityStatTable
- Siblings
- 45
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | sonet |
3 | sdh |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaLdCardEntityCardIndex mandatory The slot#. An index from 1 to The number of slots. | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.1 |
| oaLdCardEntityAmbientTemp mandatory Entity Ambient Temperature indication.
Indicates the Ambient Temperature status
2 - Temperature Normal
3 - Temperature High | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.10 |
| oaLdCardEntityRateSelect mandatory Transponder Rate Select.
Indicates the transponder rate.
oc48, stm16 and fiberChannel2125 are for card EM2009-CH
and EM2009-DH only | column | RateSelect | .1.3.6.1.4.1.6926.1.41.4.1.1.11 |
| oaLdCardEntityRateMode mandatory Transponder Rate Mode.
Indicates the transponder rate mode.
2 - Automatic - Rate is set by software
3 - Manual - Rate is set by DIP switches on board
If manual, oaLdCardRateSelect… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.12 |
| oaLdCardEntityLaserMode mandatory Transponder Laser Mode.
Indicates the transponder laser mode.
2 - Enable - Laser is enabled
3 - Disable - Laser is disabled (can not transmit) | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.13 |
| oaLdCardEntityWdmRxPm mandatory Transponder WDM receiver optical power.
Indicates the optical power in units of 1/10 dBm.
(oaLdCardEntityWdmRxPm is a signed number.)
(999) is returned when this feature is not su… | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.16 |
| oaLdCardEntityWdmTxPm mandatory Transponder WDM transmitter optical power.
Indicates the optical power in units of 1/10 dBm.
(oaLdCardEntityWdmTxPm is a signed number.)
(999) is returned when this feature is not… | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.17 |
| oaLdCardEntityLoopBack mandatory Transponder LoopBack state.
Indicates the transponder LoopBack state.
2 - normal - Transponder entity is in non-loopback state
3 - loopback - Transponder entity is in loopback s… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.18 |
| oaLdCardEntityRedundantState mandatory Transponder Redundant Mode.
Indicates the transponder redundant mode.
2 - normal - Transponder is in non-redundant mode
3 - redundant - Transponder is in redundant mode | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.19 |
| oaLdCardEntityEntityIndex mandatory The entity#. An index from 1 to The number of entities. | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.2 |
| oaLdCardEntityPrimaryState mandatory Transponder Primary/Secondary State.
Indicates the transponder Primary/Secondary status.
2 - secondary - Transponder is in secondary state and is not active
3 - primary - Transp… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.20 |
| oaLdCardEntityClockSource mandatory OCM Module Port Clock Source State.
Indicates the Port Clock Source.
2 - Port 1 - Module Clock Source is port 1
3 - Port 2 - Module Clock Source is port 2
4 - Port 3 - Module C… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.21 |
| oaLdCardEntityTransparency mandatory OCM Module Transparency State.
Indicates the Module transparency state.
2 - transparent - Module is in transparency mode
3 - no transparent - Module is in non transparency mo… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.22 |
| oaLdCardEntityAccessLinState mandatory Transponder LIN status.
Indicates the transponder access LIN status.
2 - Enable - Access LIN is enabled
3 - Disable - Access LIN is disabled | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.24 |
| oaLdCardEntityLineCoding mandatory Indicates the T1 cards Line Coding.
2 - B8ZS - Bipolar 8-zero substitution encoding
3 - AMI - Alternate Mark Inversion encoding | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.25 |
| oaLdCardEntityUartBaudRate mandatory Indicates the T1 cards UART Baud Rate configuration. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.26 |
| oaLdCardEntityUartParity mandatory Indicates the T1 cards UART Parity configuration. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.27 |
| oaLdCardEntityUartStopBit mandatory Indicates the T1 cards UART Stop Bit configuration.
1 - Stop Bit 1 x data bit,
2 - Stop Bit 1.5 x data bit. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.28 |
| oaLdCardEntityPmMode mandatory Module Performance Monitoring Mode.
Indicates the Module Performance Monitoring mode.
2 - Enable - PM is enabled
3 - Disable - PM is disabled | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.29 |
| oaLdCardEntityWdmFecMode mandatory The Forward Error Correction (FEC) mode which is used
in the module.
2 - g709 - Standard G.709 FEC mode.
3 - eFec - Enhanced FEC proprietary mode.
4 - byPass - Bypass FEC mode (n… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.30 |
| oaLdCardEntityMinDispDist mandatory Minimum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nm | column | ps/nm Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.31 |
| oaLdCardEntityMaxDispDist mandatory Maximum Dispersion distance of integrated TODC.
(0) is returned when this feature is not supported
Units: ps/nm | column | ps/nm Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.32 |
| oaLdCardEntityDispDist mandatory Dispersion distance of integrated TODC.
Units: ps/nm | column | ps/nm Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.33 |
| oaLdCardEntityCCMode mandatory EM1600-4CC10G Module cross connection mode.
dual1234 - Dual transponder mode, when port 1 <-> 2, port 3 <-> 4.
dual1324 - Dual transponder mode, when port 1 <-> 3, port 2 <-> 4.
d… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.34 |
| oaLdCardEntityOptAccTx mandatory Entity optic access Tx indication.
Indicates the optic access Transmit status
2 - Transmit On
3 - Transmit Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.35 |
| oaLdCardEntityOptDwdmTx mandatory Entity optic DWDM Tx indication.
Indicates the optic DWDM Transmit status
2 - Transmit On
3 - Transmit Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.36 |
| oaLdCardEntityEMCfgType mandatory Specifies the E&M Lead Signaling type. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.37 |
| oaLdCardEntityEMCfgSide mandatory Specifies the side of the unit:
trunkCircuitSide - Trunk Circuit Side
signalingUnitSide - Signaling Unit Side
Usualy the PBX is the trunk circuit side and the
telco, CO is th… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.38 |
| oaLdCardEntityPreemptionMode mandatory EM1600-4CC10G Module preemption mode for TX or RX Protection cross connect.
In two following preemption modes one of access ports has priority
to be active in case of two links a… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.39 |
| oaLdCardEntityActivePort mandatory EM1600-4CC10G Module actual active port for TX or RX Protection cross connect. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.40 |
| oaLdCardEntityOperationMode mandatory other - Modue does not support this feature.
normal- Normal operational mode.
yCableRedundant - For TM2-XFP module redundancy mode.
repeater - For TM2-XFPF module - connects be… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.41 |
| oaLdCardEntityRedundantType mandatory Redundant operation mode, (applicable only for modules that support this features)
other - Module does not support this feature,
normal - No redundant mode,
dualSlotRedundancy - R… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.42 |
| oaLdCardEntityOtu2MappingMode mandatory For entities that enables mapping of clients into the OTN payload. The mode will indicate about
the method of OTU-2 Line mapping. Based on that mode the user is able to build his … | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.43 |
| oaLdCardEntityTopologyMode mandatory | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.44 |
| oaLdCardEntityDispDistAdmin mandatory Administrative calibration factor for
Dispersion distance of integrated TODC.
Units: ps/nm | column | ps/nm Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.45 |
| oaLdCardEntityChannelOffset mandatory ITU channel offset.
Units: GHz | column | GHz Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.46 |
| oaLdCardEntityTimingMode mandatory For entities that enables mapping of synchronous clients into the OTN payload.
Timing mode will indicate how the clock will be recovered.
none - Module does not support t… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.47 |
| oaLdCardEntityTdcmTuningStatus mandatory Current tuning status.
inProgress - not all etalons reach their target temperature values
and some etalons are still tuning.
ok - all etalons reach their targ… | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.48 |
| oaLdCardEntityRedModeActivePort mandatory For entities that support single slot redundancy with one access port.
Active port specifies which of the acess ports is active.
For TM2_XSFPFM Port#2 indicatets the first access… | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.49 |
| oaLdCardEntityWaveLength mandatory The Card's entity laser wavelength (Lambda channel) in units of nm (Nanometer).
Returns 0 when not applicable | column | Integer32 | .1.3.6.1.4.1.6926.1.41.4.1.1.5 |
| oaLdCardEntityAutoShutdownMode mandatory Entity Auto Shutdown Mode.
Indicates the entity Auto Shutdown (eye safe) mode.
2 - Enable - Auto Shutdown mode is enabled
3 - Disable - Auto Shutdown mode is disabled. | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.50 |
| oaLdCardEntityOptAccRx mandatory Entity optic access Rx indication.
Indicates the optic access Receive status
2 - Receive On
3 - Receive Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.6 |
| oaLdCardEntityOptDwdmRx mandatory Entity optic DWDM Rx indication.
Indicates the optic DWDM Receive status
2 - Receive On
3 - Receive Off | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.7 |
| oaLdCardEntityDwdmLaserTx mandatory Entity DWDM Laser Tx Fail indication.
Indicates the DWDM Laser Transmit status
2 - Transmit OK
3 - Transmit Fail | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.8 |
| oaLdCardEntityLaserTemp mandatory Entity Laser Temperature indication.
Indicates the Laser Temperature status
2 - Temperature Normal
3 - Temperature High | column | Enumeration | .1.3.6.1.4.1.6926.1.41.4.1.1.9 |