osEthOamLsFrameSize
OA-ETH-OAM-LM-MIB ·
.1.3.6.1.4.1.6926.2.18.2.1.8
Object
column
bytes Unsigned32
This attribute specifies the Loss Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 octets, in 4 octet
increments, MUST be supported, and the range of frame sizes from 2004
through 9600 octets, in 4 octet increments, SHOULD be supported.
The adjustment to the frame size of the standard frame size is
accomplished by the addition of a Data TLV.
This object is only valid for the entity transmitting the Loss
Measurement frames and is ignored by the entity receiving frames.
Context
- MIB
- OA-ETH-OAM-LM-MIB
- OID
.1.3.6.1.4.1.6926.2.18.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- bytes
- Parent
- osEthOamLsConfEntry
- Table
- osEthOamLsConfTable
- Siblings
- 15
Syntax
bytes Unsigned32
Values & Constraints
Object Constraints
range: 64-9600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osEthOamMdIndex The Maintenance Domain level plus 1 | column | Unsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.1 |
| osEthOamLsMeasurementInterval This attribute specifies a measurement interval that is a multiple of
5 minutes. | column | seconds Integer32 | .1.3.6.1.4.1.6926.2.18.2.1.10 |
| osEthOamLsConfDestType Describes type of destination used.
Flag indicating if the destination is specified by destination MEP ID, by destination
MAC address or by list of destination MEP IDs. | column | Enumeration | .1.3.6.1.4.1.6926.2.18.2.1.11 |
| osEthOamLsConfDestMepId Destination MEP Identifier (1 - 8191). 0 if MEP is identified
by destination MAC (OsEthOamLsConfDestMepMac). | column | OsEthOamMepIdOrZero | .1.3.6.1.4.1.6926.2.18.2.1.12 |
| osEthOamLsConfDestMepMac Destination MEP MAC address instead of MEP ID. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.18.2.1.13 |
| osEthOamLsConfDestMepList List of destination MEP IDs. | column | OS-COMMON-TC-MIBMepList | .1.3.6.1.4.1.6926.2.18.2.1.14 |
| osEthOamLsConfHistorySize Number of entries in the History Table that contains records
of the Loss Measurement results | column | lines Unsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.15 |
| osEthOamLsConfTimeout Timeout for the arrival of Loss Measurement Reply | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.16 |
| osEthOamMaIndex The Maintenance Association index. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.2 |
| osEthOamMepIdentifier Source MEP for the Loopback test | column | OsEthOamMepId | .1.3.6.1.4.1.6926.2.18.2.1.3 |
| osEthOamLsEnabled This attribute specifies whether the Loss Measurement instance
is enabled. The value 'true' indicates the Loss Measurement
instance is enabled. The value 'false' indicates the L… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.18.2.1.4 |
| osEthOamLsCounterEnable A vector of bits that indicates the type of LM counters that
are enabled. A bit set to '1' enables the specific LM counter.
A bit set to '0' disables the LM counter.
… | column | Bits | .1.3.6.1.4.1.6926.2.18.2.1.5 |
| osEthOamLsInterval This attribute specifies the Performance Monitoring OAM
message transmission period. For
Performance monitoring applications the default value is
1 sec.
This attri… | column | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.6 |
| osEthOamLsPriority This attribute specifies the priority of frames with
the Loss Measurement OAM message information.
The default value MUST be the value which yields the lowest fram… | column | Unsigned32 | .1.3.6.1.4.1.6926.2.18.2.1.7 |
| osEthOamLsFramePattern Message data fill pattern | column | OctetString | .1.3.6.1.4.1.6926.2.18.2.1.9 |