ntnQos802FilterDstL4PortMax
NTN-QOS-POLICY-EXT-PIB ·
.1.3.6.1.4.1.45.4.4.1.3.1.1.4
Object
column
r/w
Integer32
The maximum value that the packet's layer 4 destination port number can have and match this filter. Valid only when applied against IP traffic flows. The value of this attribute must be greater-than-or-equal-to the value of the corresponding ntnQos802FilterDstL4PortMin attribute.
Context
- MIB
- NTN-QOS-POLICY-EXT-PIB
- OID
.1.3.6.1.4.1.45.4.4.1.3.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQos802FilterExtEntry
- Table
- ntnQos802FilterExtTable
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQos802FilterDscp The value that the DSCP in the packet can have and
match this filter. A value of -1 indicates that a specific
DSCP value has not been defined and thus all DSCP values
are consider… | column | Integer32 | .1.3.6.1.4.1.45.4.4.1.3.1.1.1 |
| ntnQos802FilterProtocol The IP protocol to match against the packet's protocol.
Valid only when applied against IP traffic. A value of
zero means match all. | column | Integer32 | .1.3.6.1.4.1.45.4.4.1.3.1.1.2 |
| ntnQos802FilterDstL4PortMin The minimum value that the packet's layer 4 destination
port number can have and match this filter. Valid only
when applied against IP traffic flows. The value of
this attribute m… | column | Integer32 | .1.3.6.1.4.1.45.4.4.1.3.1.1.3 |
| ntnQos802FilterSrcL4PortMin The minimum value that the packet's layer 4 source port
number can have and match this filter. Valid only
when applied against IP traffic flows. The value of this
attribute must b… | column | Integer32 | .1.3.6.1.4.1.45.4.4.1.3.1.1.5 |
| ntnQos802FilterSrcL4PortMax The maximum value that the packet's layer 4 source port
number can have and match this filter. Valid only
when applied against IP traffic flows. The value of this
attribute must b… | column | Integer32 | .1.3.6.1.4.1.45.4.4.1.3.1.1.6 |
| ntnQos802FilterVlanIdSet This attribute is used to specify a set of VLAN IDs
against which the traffic being classified is compared.
Packets that contain a VLAN ID equal to one of the VLAN
IDs in this se… | column | OctetString | .1.3.6.1.4.1.45.4.4.1.3.1.1.7 |