ntnSystemClfrPatternL2Format
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.5.6.1.21
Object
column
r/w
Enumeration
This object indicates the L2 packet format
that is used when specifying pattern match
data.
A value of 'notApplicable(1)' is used when
the pattern match data can be specified without
indicating the target L2 packet format.
A value of 'ethernetII(2)' indicates that the
specified pattern match data should be applied
to Ethernet II format frames.
A value of 'snap(3)' indicates that the
specified pattern match data should be applied
to IEEE 802 SNAP format frames.
A value of 'llc(4)' indicates that the
specified pattern match data should be applied
to IEEE 802 LLC format frames.
Version 2 attribute.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.5.6.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnSystemClfrEntry
- Table
- ntnSystemClfrTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnSystemClfrId An index that enumerates the system
classifier entries. Managers can obtain
new index values for row creation in this
table by reading ntnSystemClfrNextFree.
Ver… | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.5.6.1.1 |
| ntnSystemClfrStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.5.6.1.10 |
| ntnSystemClfrPatternFormat This object indicates the data link layer
packet format that is used when specifying
pattern match data.
A value of 'untagged(1)' indicates that the
specified pat… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.6.1.11 |
| ntnSystemClfrLabel A label used to reference the classifier entry
in a textual manner.
Version 1/2 attribute. | column | OctetString | .1.3.6.1.4.1.45.4.7.1.5.6.1.12 |
| ntnSystemClfrSessionId A session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.5.6.1.13 |
| ntnSystemClfrVersion Version indicator for ntnSystemClfrTable. | column | VersionIndicator | .1.3.6.1.4.1.45.4.7.1.5.6.1.14 |
| ntnSystemClfrUnknownIpMcast If 'true(1)', IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is req… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.15 |
| ntnSystemClfrKnownIpMcast If 'true(1)', IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is reques… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.16 |
| ntnSystemClfrNonIpPkt If 'true(1)', non IP packets will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
packet type.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.17 |
| ntnSystemClfrPatternIpVersion This object indicates the IP packet format
that is used when specifying pattern match
data.
A value of 'notApplicable(1)' is used when
the pattern match data can … | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.6.1.18 |
| ntnSystemClfrUnknownNonIpMcast If 'true(1)', non-IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.19 |
| ntnSystemClfrUnknownUcastFrames If 'true(1)', frames containing an unknown
unicast destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is requested… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.2 |
| ntnSystemClfrKnownNonIpMcast If 'true(1)', non-IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is re… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.20 |
| ntnSystemClfrUnknownMcastFrames If 'true(1)', frames containing an unknown
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is reques… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.3 |
| ntnSystemClfrKnownUcastFrames If 'true(1)', frames containing a known
unicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.4 |
| ntnSystemClfrKnownMcastFrames If 'true(1)', frames containing a known
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.5 |
| ntnSystemClfrBcastFrames If 'true(1)', frames containing a broadcast
destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is
requested based… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.5.6.1.6 |
| ntnSystemClfrPatternPosition Supports arbitrary pattern match classification.
Up to 128 bytes of data within the first 128 bytes
of a packet can be identified for pattern matching
purposes. This object and… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.5.6.1.7 |
| ntnSystemClfrPatternData Supports arbitrary pattern match classification.
Up to 128 bytes of data within the first 128 bytes
of a packet can be identified for pattern matching
purposes. This object and… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.5.6.1.8 |
| ntnSystemClfrStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.5.6.1.9 |