ntnQosL2AccessElemVlanIdMin
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.13.4.1.6
Object
column
r/w
Integer32
The minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosL2AccessElemVlanIdMin value must be
less than or equal to the
ntnQosL2AccessElemVlanIdMax value.
Setting the ntnQosL2AccessElemVlanIdMin object
to 1 and the ntnQosL2AccessElemVlanIdMax to
4094 indicates that VLAN data should not be
considered during traffic classification.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.13.4.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQosL2AccessElemEntry
- Table
- ntnQosL2AccessElemTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosL2AccessElemId An index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosL2AccessElemNextFree. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.13.4.1.1 |
| ntnQosL2AccessElemUserPriority The 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determin… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.10 |
| ntnQosL2AccessElemActionDrop This action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packet… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.11 |
| ntnQosL2AccessElemActionRemarkDscp This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this o… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.4.1.12 |
| ntnQosL2AccessElemActionRemarkCos This action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.13 |
| ntnQosL2AccessElemActionSetPrec This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.14 |
| ntnQosL2AccessElemName A label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label. | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.4.1.15 |
| ntnQosL2AccessElemBlock A label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
nam… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.4.1.16 |
| ntnQosL2AccessElemType Identifies the L2 access element type. Designates
the higher-level application through which this entry
was created. | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.17 |
| ntnQosL2AccessElemStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.13.4.1.18 |
| ntnQosL2AccessElemStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.13.4.1.19 |
| ntnQosL2AccessElemDstAddr The 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into a… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.4.1.2 |
| ntnQosL2AccessElemEvalPrec An evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications. | column | Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.4.1.20 |
| ntnQosL2AccessElemDstAddrMask This object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnQosL2AccessEl… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.4.1.3 |
| ntnQosL2AccessElemSrcAddr The 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
t… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.4.1.4 |
| ntnQosL2AccessElemSrcAddrMask This object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnQosL2Acces… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.4.1.5 |
| ntnQosL2AccessElemVlanIdMax The maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosL2AccessElemVlanIdMax value must
be grea… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.4.1.7 |
| ntnQosL2AccessElemVlanTag This object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
fra… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.4.1.8 |
| ntnQosL2AccessElemEtherType This object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'AR… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.4.1.9 |