ntnQosDsL2AccessElemType
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.13.11.1.29
Object
column
r/w
Enumeration
Identifies the DS/L2 access element type. Designates
the higher-level application through which this entry
was created.
Version 1/2 attribute.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.13.11.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQosDsL2AccessElemEntry
- Table
- ntnQosDsL2AccessElemTable
- Siblings
- 63
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosDsL2AccessElemId An index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosDsL2AccessElemNextFree.
Vers… | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.13.11.1.1 |
| ntnQosDsL2AccessElemDstL4PortMin The minimum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.11.1.10 |
| ntnQosDsL2AccessElemDstL4PortMax The maximum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. This value must
be equal to or greater than the valu… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.11.1.11 |
| ntnQosDsL2AccessElemSrcL4PortMin The minimum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry.
Version 1/2 attribute. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.11.1.12 |
| ntnQosDsL2AccessElemSrcL4PortMax The maximum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry. This value
must be equal to or greater than the value
sp… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.11.1.13 |
| ntnQosDsL2AccessElemDstMacAddr The 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into a… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.14 |
| ntnQosDsL2AccessElemDstMacAddrMask This object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnQosDsL2Access… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.15 |
| ntnQosDsL2AccessElemSrcMacAddr The 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
t… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.16 |
| ntnQosDsL2AccessElemSrcMacAddrMask This object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnQosDsL2Acc… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.17 |
| ntnQosDsL2AccessElemVlanIdMin The minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosDsL2AccessElemVlanIdMin value must be
le… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.18 |
| ntnQosDsL2AccessElemVlanIdMax The maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnQosDsL2AccessElemVlanIdMax value must
be gr… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.19 |
| ntnQosDsL2AccessElemAddrType The type of IP address used by this access element
entry. While other types of addresses are
defined in the InetAddressType textual convention,
and DNS names, a classifier can… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.4.7.1.13.11.1.2 |
| ntnQosDsL2AccessElemVlanTag This object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
fram… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.20 |
| ntnQosDsL2AccessElemEtherType This object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'AR… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.21 |
| ntnQosDsL2AccessElemUserPriority The 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determin… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.22 |
| ntnQosDsL2AccessElemActionDrop This action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packe… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.23 |
| ntnQosDsL2AccessElemActionRemarkDscp This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this o… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.24 |
| ntnQosDsL2AccessElemActionRemarkCos This action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.25 |
| ntnQosDsL2AccessElemActionSetPrec This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.26 |
| ntnQosDsL2AccessElemName A label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label.
… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.11.1.27 |
| ntnQosDsL2AccessElemBlock A label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
nam… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.11.1.28 |
| ntnQosDsL2AccessElemDstIpAddr The IP address to match against the packet's
destination IP address. This may not be a DNS
name, but may be an IPv4 or IPv6 prefix.
ntnQosDsL2AccessElemDstIpPrefixLength indic… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.3 |
| ntnQosDsL2AccessElemStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.13.11.1.30 |
| ntnQosDsL2AccessElemStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.13.11.1.31 |
| ntnQosDsL2AccessElemEvalPrec An evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications.
… | column | Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.32 |
| ntnQosDsL2AccessElemIpFlags Represents the flags present in an IPv4 header.
If a bit that is associated with a specific IP flag
is set in this attribute, IPv4 packets with the
specified flag set in the heade… | column | Bits | .1.3.6.1.4.1.45.4.7.1.13.11.1.33 |
| ntnQosDsL2AccessElemTcpCtrlFlags Represents the control flags (code bits) present in
an TCP header. If a bit that is associated with a
specific TCP control flag is set in this attribute,
TCP packets with the spec… | column | Bits | .1.3.6.1.4.1.45.4.7.1.13.11.1.34 |
| ntnQosDsL2AccessElemIpv4Options This object indicates whether the presence,
or lack thereof, of IPv4 options in an IPv4
packet should should be considered when looking
for a match for this classifier entry.
… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.35 |
| ntnQosDsL2AccessElemPktType This object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'ethernetII(1)' indicates that only
Ether… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.36 |
| ntnQosDsL2AccessElemIvidMin The minimum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMin value mu… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.37 |
| ntnQosDsL2AccessElemIvidMax The maximum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMax value mu… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.38 |
| ntnQosDsL2AccessElemUnknownUcastFrames If 'true(1)', frames containing an unknown
unicast destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is requested
ba… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.39 |
| ntnQosDsL2AccessElemDstIpPrefixLength The length of the CIDR Prefix carried in
ntnQosDsL2AccessElemDstIpAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a… | column | bits INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.45.4.7.1.13.11.1.4 |
| ntnQosDsL2AccessElemUnknownMcastFrames If 'true(1)', frames containing an unknown
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.40 |
| ntnQosDsL2AccessElemKnownUcastFrames If 'true(1)', frames containing a known
unicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested based… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.41 |
| ntnQosDsL2AccessElemKnownMcastFrames If 'true(1)', frames containing a known
multicast destination address will match
this classification entry. A value of
'false(2)' indicates that no classification
is requested bas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.42 |
| ntnQosDsL2AccessElemBcastFrames If 'true(1)', frames containing a broadcast
destination address will match this
classification entry. A value of 'false(2)'
indicates that no classification is
requested based… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.43 |
| ntnQosDsL2AccessElemUnknownIpMcast If 'true(1)', IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is reques… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.44 |
| ntnQosDsL2AccessElemKnownIpMcast If 'true(1)', IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.45 |
| ntnQosDsL2AccessElemNonIpPkt If 'true(1)', non IP packets will match this
classification entry. A value of 'false(2)' indicates
that no classification is requested based on this
packet type.
Ve… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.46 |
| ntnQosDsL2AccessElemVersion Version indicator for ntnQosDsL2AccessElemTable. | column | VersionIndicator | .1.3.6.1.4.1.45.4.7.1.13.11.1.47 |
| ntnQosDsL2AccessElemUnknownNonIpMcast If 'true(1)', non-IP packets containing an unknown
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is re… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.48 |
| ntnQosDsL2AccessElemKnownNonIpMcast If 'true(1)', non-IP packets containing a known
multicast destination address will match this
classification entry. A value of 'false(2)' indicates
that no classification is reque… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.49 |
| ntnQosDsL2AccessElemSrcIpAddr The IP address to match against the packet's
source IP address. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
ntnQosDsL2AccessElemSrcIpPrefixLength indicates
… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.7.1.13.11.1.5 |
| ntnQosDsL2AccessElemMasterBlockMember If 'true(1)', attribute values in this DsL2Access
element will take precedence over values in other
entries when multiple elements are members of the
same block and a single value… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.13.11.1.50 |
| ntnQosDsL2AccessElemMeterType The metering algorithm associated with
the rate and burst parameters.
Version 1/2 attribute. | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.51 |
| ntnQosDsL2AccessElemRate The token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
CIR for Simple Token Bucket
CIR in RFC 2697 for srTCM
CIR in RFC 2698 for trTCM
CT… | column | kilobits per second Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.52 |
| ntnQosDsL2AccessElemBurstSize The maximum number of bytes in a single
transmission burst. This attribute is
used for:
Token bucket size for Simple Token Bucket
CBS in RFC 2697 for srTCM
CBS in R… | column | Bytes INTEGRATED-SERVICES-MIBBurstSize | .1.3.6.1.4.1.45.4.7.1.13.11.1.53 |
| ntnQosDsL2AccessElemOutActionDrop This action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified,… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.54 |
| ntnQosDsL2AccessElemOutActionRemarkDscp This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.55 |
| ntnQosDsL2AccessElemOutActionRemarkCos This action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.56 |
| ntnQosDsL2AccessElemOutActionSetPrec This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.57 |
| ntnQosDsL2AccessElemSecondaryRate The token-bucket rate, in kilobits per
second (kbps). This attribute is used for:
PIR in RFC 2698 for trTCM
A rate value equal to 0 indicates that
no… | column | kilobits per second Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.58 |
| ntnQosDsL2AccessElemSecondaryBurstSize The maximum number of bytes in a single
transmission burst. This attribute is
used for:
EBS in RFC 2697 for srTCM
PBS in RFC 2698 for trTCM.
Version … | column | Bytes INTEGRATED-SERVICES-MIBBurstSize | .1.3.6.1.4.1.45.4.7.1.13.11.1.59 |
| ntnQosDsL2AccessElemSrcIpPrefixLength The length of the CIDR Prefix carried in
ntnQosDsL2AccessElemSrcIpAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a … | column | bits INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.45.4.7.1.13.11.1.6 |
| ntnQosDsL2AccessElemYelActionDrop This action attribute is used to specify
whether a packet deemed out-of-profile
should dropped or switched (i.e., not
dropped).
The value 'drop(1)', when specified,… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.60 |
| ntnQosDsL2AccessElemYelActionRemarkDscp This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram that is deemed to
be out-of-profile to… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.61 |
| ntnQosDsL2AccessElemYelActionRemarkCos This action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame that is
deemed to be out-of-profile to be updated
based on the… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.62 |
| ntnQosDsL2AccessElemYelActionSetPrec This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.63 |
| ntnQosDsL2AccessElemStage This attribute specifies the
stage (ingress or egress) on which
filters are applied.
Version 2 attribute. | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.11.1.64 |
| ntnQosDsL2AccessElemDscp The value that the DSCP in the packet must
have to match this entry. A value of -1
indicates that a specific DSCP value has not
been defined and thus all DSCP values are
consi… | column | DIFFSERV-DSCP-TCDscpOrAny | .1.3.6.1.4.1.45.4.7.1.13.11.1.7 |
| ntnQosDsL2AccessElemFlowId The flow identifier in an IPv6 header.
Version 1/2 attribute. | column | FlowIdOrAny | .1.3.6.1.4.1.45.4.7.1.13.11.1.8 |
| ntnQosDsL2AccessElemProtocol The IP protocol to match against the IPv4
protocol number or the IPv6 Next-Header number
in the packet. A value of 255 means match all.
Note the protocol number of 255 is rese… | column | Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.11.1.9 |