ntnL2MultiFieldClfrDstAddrMask
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.5.4.1.3
Object
This object specifies the bits in a 802
destination address that should be considered
when performing a 802 DA comparison against
the address specified in the
ntnL2MultiFieldClfrDstAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 DA in
received frames to derive the value to be
compared against the ntnL2MultiFieldClfrDstAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnL2MultiFieldClfrDstAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnL2MultiFieldClfrDstAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnL2MultiFieldClfrDstAddr object.
Version 1/2 attribute.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.5.4.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnL2MultiFieldClfrEntry
- Table
- ntnL2MultiFieldClfrTable
- Siblings
- 22
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnL2MultiFieldClfrId An arbitrary integer index that uniquely
identifies this 802 classifier among all
of the 802 classifiers.
Version 1/2 attribute. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.5.4.1.1 |
| ntnL2MultiFieldClfrUserPriority The 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determin… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.10 |
| ntnL2MultiFieldClfrStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.5.4.1.11 |
| ntnL2MultiFieldClfrStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value.
Version 1/… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.5.4.1.12 |
| ntnL2MultiFieldClfrLabel A label used to reference the classifier entry
in a textual manner.
Version 1/2 attribute. | column | OctetString | .1.3.6.1.4.1.45.4.7.1.5.4.1.13 |
| ntnL2MultiFieldClfrSessionId A session identifier used to reference transitory
(volatile) data.
Version 1/2 attribute. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.14 |
| ntnL2MultiFieldClfrVersion Version indicator for ntnL2MultiFieldClfrTable. | column | VersionIndicator | .1.3.6.1.4.1.45.4.7.1.5.4.1.15 |
| ntnL2MultiFieldClfrPktType This object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'ethernetII(1)' indicates that only
Et… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.16 |
| ntnL2MultiFieldClfrIvidMin The minimum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMin value … | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.17 |
| ntnL2MultiFieldClfrIvidMax The maximum value that the Inner VLAN ID (Ivid)
in a double tagged packet must have in order to
match this classifier entry.
The ntnL2MultiFieldClfrIvidMax value … | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.18 |
| ntnL2MultiFieldClfrTPID This object specifies the value that will be
compared against the value contained in the
Ethertype field of the outer tag of a
single or a double tagged (802.1ad QinQ) packet.
… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.19 |
| ntnL2MultiFieldClfrDstAddr The 802 address against which the 802 DA of
incoming traffic streams will be compared.
Frames whose 802 DA matches the physical
address specified by this object, taking
into a… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.5.4.1.2 |
| ntnL2MultiFieldClfrCFI This object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'cfiZero(1)' indicates that only
tagge… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.20 |
| ntnL2MultiFieldClfrITPID This object specifies the value that will be
compared against the value contained in the
Ethertype field of the inner tag of a
double tagged (802.1ad QinQ) packet.
… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.21 |
| ntnL2MultiFieldClfrICFI This object indicates the data link layer
frame format that frames must have to match
this L2 classifier entry.
A value of 'cfiZero(1)' indicates that only
doubl… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.22 |
| ntnL2MultiFieldClfrIUserPriority The 802.1p user priority value against which
the value contained in the user priority
field of the inner tag of a double tagged
802.1 frame is compared. A test for equality
is… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.23 |
| ntnL2MultiFieldClfrSrcAddr The 802 MAC address against which the 802
MAC SA of incoming traffic streams will be
compared. Frames whose 802 MAC SA matches the
physical address specified by this object,
t… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.5.4.1.4 |
| ntnL2MultiFieldClfrSrcAddrMask This object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnL2MultiFie… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.5.4.1.5 |
| ntnL2MultiFieldClfrVlanIdMin The minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnL2MultiFieldClfrVlanIdMin value must be
les… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.6 |
| ntnL2MultiFieldClfrVlanIdMax The maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this classifier entry.
The ntnL2MultiFieldClfrVlanIdMax value must
be gre… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.7 |
| ntnL2MultiFieldClfrVlanTag This object indicates the data link layer
packet format that frames must have to match
this L2 classifier entry.
A value of 'untagged(1)' indicates that only
fra… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.5.4.1.8 |
| ntnL2MultiFieldClfrEtherType This object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'AR… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.5.4.1.9 |