gponActiveAlarmTable

Active alarm table
          
The device shall maintain this table, to maintain all outstanding 
(not cleared) alarms generated by the device, including:
1. Not hit device local alarm filter. That means had been reported to
   trap receiver (NMS or EMS)
2. Hit local alarm filter. That means not trap is reported to trap receiver
   for the alarm.
          
The device shall maintain two numbers:
1. Alarm sequence number: As described in gponTrapSequenceNumber, it is initially
   set to 1 when device restarts, increases per trap reported to trap receiver,
   and rollover to 1 once it reaches the maximum value. 
   From NMS's view, traps received from a nodes will be consecutive, by identifying 
   the alarm sequence number carried in alarm trap. If breaks, means some trap 
   may be lost, since packet loss between NMS and NE. 
2. Alarm raising number: This is maintained by NE internally and does not intend for
   being acknowledged by external manage system. It is designed to uniquely indentify
   each alarm raised by NE, excluding duplicates. Once one alarm raised, despite 
   whether it is hit by alarm filter, NE shall assign a raising number to it. So, it
   major functionality is to uniquely identify alarms hit NE local alarm filter, since 
   this kindly alarm will not be reported to NMS, and hence no alarm sequence number
   is assigned to it.
   It is initially  set to 1 when device restarts, increases per alarm generation (
   excluding duplicates), and rollover to 1 once it reaches the maximum value. 
          
FUNCTION DESCRIPTION OF ACTIVE ALARM TABLE:         
ALARM RAISING
----------------------        
1. When NE detects one fault and associates to one kind of alarm, it shall check whether
   there is same alarm in active alarm table, which is indexed by alarm code and alarm
   instance. If hits, it means duplicates, update the corresponding entry of the table.
   Otherwise,
2. The alarm is not a duplicate. Assign an alarm raising number. Check whether the
alarm hits local alarm filters. If hits, set alarm sequence number to 0.
   Create an entry into active alarm table. Otherwise,
3. Assign an alarm sequence number to the alarm. Create an entry into active alarm
table. Report the alarm trap to all trap receivers.
             
ALARM CLEARING
----------------------        
1. When NE detects one fault is cleared and associates to one kind of alarm, it shall 
   check whether there is corresponding alarm in active alarm table, which is indexed
by alarm code and alarm instance. If no hit, escape this clear event. Upon a hit,
if the alarm sequence number is 0, move the active alarm entry to history alarm
table and update the corresponding fields. At this case, historyAlarmCorrelationId
and historyAlarmSeqNum will be set to 0.
   Otherwise,
2. Assign an alarm sequence number to the clear trap. Report the alarm clear trap to 
   all trap receivers. Move the active alarm entry to history alarm table and update 
   the corresponding fields. At this case, activeAlarmSeqNum shall be copied to 
   historyAlarmCorrelationId, and historyAlarmSeqNum shall be set to the new alarm
   sequence number for the clear trap.
          
ALARM SYNCHRONIZATION BETWEEN NE AND NMS
---------------------------------------------        
1. Once NMS finds the alarm sequence number in reported alarm traps is not continuous,
   it will walk active or history alarm table of the NE for the lost seuqence number.

MIB

NSCRTV-FTTX-GPON-MIB

OID

.1.3.6.1.4.1.17409.2.2.12.2.1

Type

table

Status

current

Parent

gponAlarmObjGroup

Siblings

2

Children

1