severityLevel
NS-ROOT-MIB ·
.1.3.6.1.4.1.5951.4.1.10.2.86
Object
scalar
TrapSeverityLevel
This represents the alarm severity level
Context
- MIB
- NS-ROOT-MIB
- OID
.1.3.6.1.4.1.5951.4.1.10.2.86- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- snmpTrapVarBindOidsGroup
- Siblings
- 87
Syntax
TrapSeverityLevel
- Source
- TrapSeverityLevel
- Base type
Enumeration
Values & Constraints
Type Values
1 | critical |
2 | major |
4 | minor |
8 | warning |
16 | informational |
32 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmHighThreshold This is the high threshold value configured for this alarm. When this threshold is crossed an SNMP alarm is generated. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.1 |
| alarmProbeFailedErrorString This string represents the error occured on the last monitor probe failure. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.10 |
| alarmVipRhiIpAddr This represents the VIP whose RHI state has changed. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.11 |
| alarmVipRhiState This represents the changed RHI state of the VIP. | scalar | EntityState | .1.3.6.1.4.1.5951.4.1.10.2.12 |
| alarmRateLmtThresholdExceeded This specifies the name of the rate limit identifier that exceeded the threshold. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.13 |
| ipAddressGathered This specifies the list of ip addresses that may have been gathered during the expression evaluation. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.14 |
| stringComputed This contains the string computed during the expression evaluation. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.15 |
| alarmEntityCurState This represents the state of vserver, physicalservice or servicegroup. | scalar | EntityState | .1.3.6.1.4.1.5951.4.1.10.2.16 |
| sysHealthPowerSupplyStatus This text represents the status of power supply unit | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.17 |
| alarmCurrentValue This is the current value of the entity when high or normal threshold trap is sent. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.18 |
| alarmVipRhiInetAddressType The address type of alarmVipRhiInetAddress | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5951.4.1.10.2.19 |
| alarmNormalThreshold This is the normal threshold configured for this alarm which triggers the return-to-normal alarm. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.2 |
| alarmVipRhiInetAddress This represents the VIP whose RHI state has changed. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5951.4.1.10.2.20 |
| alarmVsvrOldName obsolete ...OBSOLETE | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.21 |
| alarmVsvrNewName obsolete ...OBSOLETE | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.22 |
| nsClientIPAddr This represents the IP Address of the machine trying to access / connected to Citrix ADC. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.23 |
| ipConflictAddr The IP configured in Citrix ADC conflicting in the network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.24 |
| appfwLogMsg This represents the log message of appfw check violation. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.25 |
| dnskeyName The name of the DNS key that is due for expiry. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.26 |
| dnskeyTimeToExpire The amount of time for the key to expire | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.27 |
| dnskeyUnitsOfExpiry the units of the time of expiry | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.28 |
| entityNewName This represents the entity newName after name was changed. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.29 |
| entityName This represents the name of the entity whose state has changed. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.3 |
| entityOldName This represents the entity Name before name was changed. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.30 |
| platformRateLimitPacketDropCount This counter has the number of packets dropped due to platform rate limiting since the last check. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.31 |
| haLicenseMatchState the state of HA License check | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.32 |
| sslCardStatusMsg This represents the interpretation details of sslCardStatus. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.33 |
| callHomeUploadEventStatusMsg This represents the status of CallHome Upload Event. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.34 |
| oldCCOIP This represents the old Configuration Coordinator IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.35 |
| newCCOIP This represents the new Configuration Coordinator IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.36 |
| oldOVS This represents the old cluster Operational View Set. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.37 |
| newOVS This represents the new Cluster Operational View Set. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.38 |
| qosdVersion This counter tells the QOSD version | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.39 |
| nsUserName This represents the name of the system user. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.4 |
| brVersion This counter tells the BR version | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.40 |
| sslChipName This represents the name of a Crypto device . | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.41 |
| vrid This represents the VRID. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.42 |
| vridBoundVIP This represents the VRID bound VIP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.43 |
| newVridPriority This represents the new priority of VRID | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.44 |
| oldVridPriority obsolete This object has been obsoleted. This was wrongly added assuming that vridStatChange trap will also send old VRID priority, but it wont. It will send effective VRID priority | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.45 |
| effectiveVridPriority This represents the effective priority of VRID | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.46 |
| dstip This is the dstip for which the port allocation has failed. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.47 |
| platformLicensedThroughput This represents the platform licensed throughput. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.5951.4.1.10.2.48 |
| platformLicensedPPS This represents the platform licensed packets per seconds. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.5951.4.1.10.2.49 |
| configurationCmd This represents the configuartion command that was issued. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.5 |
| commandFailureReason This is the error string displayed in cli when the command fails. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.50 |
| nsIPAddressType The address type of nsIPAddress | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5951.4.1.10.2.51 |
| nsIPAddress This represents the IPV6 or IPV4 address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5951.4.1.10.2.52 |
| lsnSubscrIP This represents the LSN Subscriber IP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.53 |
| lsnSubscrTD This represents the LSN Subscriber TD. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5951.4.1.10.2.54 |
| protocol This represents the IP Protocol. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.55 |
| vsvrCurSoValue vserver spillover value. | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.5951.4.1.10.2.56 |
| vsvrSoMethod vserver spillover method. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.57 |
| vsvrSoThresh vserver spillover threshold. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.58 |
| lsnSessLimitExceededBy This represents the entity(group/subscriber) which has exceeded the quota. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.59 |
| authorizationStatus This represents the authorization status for an attempted configuration change. | scalar | AuthorizationStatus | .1.3.6.1.4.1.5951.4.1.10.2.6 |
| nsPartitionName This is the partition name of the source of the trap | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.60 |
| operation This represents the operation like add,remove etc | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.61 |
| fromPartition This represents the partition name from where switch happened | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.62 |
| toPartition This represents the partition name to where switch happened | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.63 |
| clPeerID This represents the unique ids of the cluster nodes from where heartbeats are not received on backplane | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.64 |
| lsnDSLiteB4Address This represents the IPv6 address of the B4 device in DS-Lite environment. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.65 |
| ipConflictMacAddr The MAC address of the machine having the conflicting IP configured in the network. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.66 |
| gslbSite This represents the GSLB site name. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.67 |
| siteIP This represents the GSLB site IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5951.4.1.10.2.68 |
| lsnNAT64SubscrIPV6 This represents the LSN Subscriber IPV6 address. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.69 |
| commandExecutionStatus This represents the command execution status for the attempted configuration change. | scalar | CommandExecutionStatus | .1.3.6.1.4.1.5951.4.1.10.2.7 |
| lsnCurSharedPages This represents the current shared pages in LSN Memory | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.5951.4.1.10.2.70 |
| lsnTotSharedPages This represents the total shared pages in LSN Memory | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.5951.4.1.10.2.71 |
| dnsCacheThreshold This represents the maximum DNS cache threshold that is configured. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5951.4.1.10.2.72 |
| dnsCurCacheValue This represents the current DNS cache size used. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.73 |
| sourceIP This represents the source IP of attacker's connection | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5951.4.1.10.2.74 |
| sourceIPType This represents the type of source IP address. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5951.4.1.10.2.75 |
| sourcePort This represents the source port of attacker's connection | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5951.4.1.10.2.76 |
| gslbSiteName This represents GSLB site name. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.77 |
| gslbSyncStatus This represents GSLB site sync status (success/failure). | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.78 |
| urlFilterDbUpdateStatus This represents URLFiltering DB update status (success/failure). | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.79 |
| unackSynCount The number of un-acknowledged SYNs Citrix ADC has received in the past synFlood time-interval. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.8 |
| urlfiltDbUpdateErrorCode This represents the Error Code during the URLFiltering DB update. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.80 |
| urlfiltInitSdkStatus This represents the status when initializing the URLFiltering SDK (success/failure). | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.81 |
| urlfiltInitSdkErrorCode This represents the Error Code during the URLFiltering SDK initialization. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.82 |
| botLogMsg This represents the log message of Bot check violation. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.83 |
| clusterSyncFailureReason This is the error string displayed when cluster sync failure happens | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.84 |
| dstport This represents the destination port | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5951.4.1.10.2.85 |
| adcAnomalyId This represents the failure object of the ADC Anomaly. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.87 |
| adcAnomalyMessage This represents the description of the anomaly detected. | scalar | OctetString | .1.3.6.1.4.1.5951.4.1.10.2.88 |
| alarmLowThreshold This is the low threshold value configured for this alarm. When this threshold is crossed an SNMP alarm is generated. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5951.4.1.10.2.9 |