haCurState

NS-ROOT-MIB · .1.3.6.1.4.1.5951.4.1.1.23.24
MIB view Table view

Object

scalar HAState 
State of the HA node, based on its health, in a high availability setup. Possible values are: 
UP - Indicates that the node is accessible and can function as either a primary or secondary node.
DISABLED - Indicates that the high availability status of the node has been manually disabled. Synchronization and propagation cannot take place between the peer nodes.
INIT - Indicates that the node is in the process of becoming part of the high availability configuration. 
PARTIALFAIL - Indicates that one of the high availability monitored interfaces has failed because of a card or link failure. This state triggers a failover.
COMPLETEFAIL - Indicates that all the interfaces of the node are unusable, because the interfaces on which high availability monitoring is enabled are not connected or are manually disabled. This state triggers a failover.
DUMB - Indicates that the node is in listening mode. It does not participate in high availability transitions or transfer configuration from the peer node. This is a configured value, not a statistic.
PARTIALFAILSSL - Indicates that the SSL card has failed. This state triggers a failover.
ROUTEMONITORFAIL - Indicates that the route monitor has failed. This state triggers a failover.

Context

MIB
NS-ROOT-MIB
OID
.1.3.6.1.4.1.5951.4.1.1.23.24
Type
scalar
Access
readonly
Status
current
Parent
nsHighAvailabilityGroup
Siblings
27

Syntax

HAState
Source
HAState
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1init
2down
3up
4partialFail
5monitorFail
6monitorOk
7completeFail
8dumb
9disabled
10partialFailSsl
11routemonitorFail

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
haPeerId
The unique identifier to represent the failover peer Citrix ADC
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.5951.4.1.1.23.1
haErrNsbMemFail
Total number of times memory allocation failed while sending heartbeats.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.10
haErrPortSilent
Total number of times heartbeat packets were not received on any enabled interface for the duration of the Dead Interval.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.11
haTotTimerRecoveries
Total number of times HA engine recovered from tight loops. (i.e., Total number of times HA timers are not called for MAX down time).
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.12
haErrSwMonitorFail obsolete
...OBSOLETE
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.13
haNicsMonitorFailed
Interfaces on which HA heartbeats are not being seen
scalarOctetString.1.3.6.1.4.1.5951.4.1.1.23.14
haLastMasterStateTransitionReason
The reason for the last master state transition. This gives the conditions under which this node assumed the current state. The current state is available at the oid sysHi…
scalarOctetString.1.3.6.1.4.1.5951.4.1.1.23.15
haPeerSystemState
HA peer system state
scalarOctetString.1.3.6.1.4.1.5951.4.1.1.23.16
haErrPropTimeout
Number of times propagation timed out.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.17
haCurDerivedInc
Derived incarnation based on IOCTLs received.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.5951.4.1.1.23.18
haCurPeerInc
The peer's incarnation as seen from heartbeats.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.5951.4.1.1.23.19
haPeerIpAddress
This represents the ipaddress of the failover peer Citrix ADC(Only for HA over IPv4). For HA over IPv6 (as well as IPv4) haPeerInetAddr will contain this information.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5951.4.1.1.23.2
haErrMasterDispute
Number of HA master disputes.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.20
haTotPktTx
Number of heartbeat packets sent to the peer node. Heartbeats are sent at regular intervals (default is 200 milliseconds) to determine the state of the peer node.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.21
haTotPktRx
Number of heartbeat packets received from the peer node. Heartbeats are sent at regular intervals (default is 200 milliseconds) to determine the state of the peer node.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.22
haCurStatus
Whether a Citrix ADC is configured for high availability. Possible values are YES and NO. If the value is NO, the high availability statistics below are invalid.
scalarHAON.1.3.6.1.4.1.5951.4.1.1.23.23
haPeerInetAddrType
The address type of haPeerInetAddr
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5951.4.1.1.23.25
haPeerInetAddr
This represents the Internet Address of the failover peer Citrix ADC
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5951.4.1.1.23.26
haNicMonitorSucceeded
Heartbeat succeeded on this nic.
scalarOctetString.1.3.6.1.4.1.5951.4.1.1.23.27
haLastNicMonitorFailed
Heartbeat failed on this nic.
scalarOctetString.1.3.6.1.4.1.5951.4.1.1.23.28
haPeerState
This represents the state of the failover peer Citrix ADC whether Primary or Secondary
scalarHAMode.1.3.6.1.4.1.5951.4.1.1.23.3
haTotStateTransitions
Total number of master state changes that the Citrix ADC has made from primary to secondary and vice-versa.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.4
haTimeofLastStateTransition
This represents the time since the Citrix ADC underwent a state change from primary to secondary or vice-versa
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.5951.4.1.1.23.5
haTotStateFail
Number of times state changed to PARTIAL_FAIL/PARTIAL_FAIL_SSL/ROUTEMONITOR_FAIL/COMPLETE_FAIL.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.6
haErrSyncFailure
Number of times the configuration of the primary and secondary nodes failed to synchronize since that last transition. A synchronization failure results in mismatched configuratio…
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.7
haErrTotNodeDown
Total number of heart-beats missed while the peer node was DOWN.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.8
haErrPropMemFail
Total number of times memory allocation failed during command propagation.
scalarSNMPv2-SMICounter64.1.3.6.1.4.1.5951.4.1.1.23.9