nqaMpingStatsTestFinished

NQA-MIB · .1.3.6.1.4.1.2011.5.25.111.4.5.1.20
MIB view Table view

Object

column Enumeration 
The status of test execution.

Context

MIB
NQA-MIB
OID
.1.3.6.1.4.1.2011.5.25.111.4.5.1.20
Type
column
Access
readonly
Status
current
Parent
nqaMpingStatsEntry
Table
nqaMpingStatsTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1noFinish
2finish

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nqaMpingStatsIndex
The index of mping statistics table, and the times of dispatching dependency tests.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.5.1.1
nqaMpingStatsSumCompletionTime2High
The high order 32 bits of the sum of squares of RTT (response time) for each packet of test execution.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.10
nqaMpingStatsCompletionTimeMin
The minimum RTT of all packets for executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.5.1.11
nqaMpingStatsCompletionTimeMax
The maximum RTT of all packets in executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.5.1.12
nqaMpingStatsTimeouts
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.13
nqaMpingStatsBusies
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.14
nqaMpingStatsSequenceErrors
The times that sequence error happends.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.15
nqaMpingStatsDrops
The times probes of the test dropped due to sending or connecting failure .
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.16
nqaMpingStatsProbeResponses
The number of received response packets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.17
nqaMpingStatsSentProbes
The number of sent packets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.18
nqaMpingStatsLastGoodProbe
Date and time when the last response was received for a probe.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.5.25.111.4.5.1.19
nqaMpingStatsReceiverIndex
The index of receiver ,that received the mping request packet and response the reply packet .
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.5.1.2
nqaMpingStatsReceiverCount
The current serial number of receivers.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.5.1.21
nqaMpingStatsLastFibHit
Whether the fib is hit on the device when receiving the last packet.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.111.4.5.1.22
nqaMpingStatsRttAvg
The average of RTTs that were successfully measured by tests.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.5.1.23
nqaMpingStatsLostPacketRatio
The ratio of the packets lost to all packets sent in the test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.5.1.24
nqaMpingStatsTargetAddressType
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.4.5.1.3
nqaMpingStatsTargetAddress
The destination address .
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.4.5.1.4
nqaMpingStatsReceiverAddress
The address of mping receiver
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.4.5.1.5
nqaMpingStatsCompletions
The status of test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.5.1.6
nqaMpingStatsRTDOverThresholds
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.7
nqaMpingStatsSumCompletionTime
The sum of RTT (response time) of sent packets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.8
nqaMpingStatsSumCompletionTime2Low
The low order 32 bits of the sum of squares of RTT (response time) for each packet of test execution.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.5.1.9