wanPrimaryState
NORTEL-OME40G-FAC-MIB ·
.1.3.6.1.4.1.562.68.11.3.1.4.1.1.9
Object
column
PrimaryState
Primary State of the faciltiy. Can only be modified by changing the admin state.
Context
- MIB
- NORTEL-OME40G-FAC-MIB
- OID
.1.3.6.1.4.1.562.68.11.3.1.4.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nnWanEntry
- Table
- nnWanTable
- Siblings
- 11
Syntax
PrimaryState
- Source
- PrimaryState
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | is |
2 | is-anr |
3 | oos-au |
4 | oos-ma |
5 | oos-auma |
6 | oos-maanr |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frameChecksum For mapping=GFP-F, value can be 0 or 32 | column | Integer32 | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.1 |
| wanSecondaryState Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to … | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.10 |
| wanAdminState This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to O… | column | AdminState | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.11 |
| wanAID Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.12 |
| wanMapping GFP-F is only supported value | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.2 |
| gfpRfi Enable/Disable | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.3 |
| gfpRtDelay Enable/Disable | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.4 |
| condType GFP CMF is the only supported value. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.5 |
| preamble KEEP/DISCARD ethernet preamble | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.6 |
| fcsErrFrames KEEP/DISCARD FCS-errored frames end-to-end. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.7 |
| transmittedUPI This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.4.1.1.8 |