nmsenvTestPt1MarginVal

NMS-SYS · .1.3.6.1.4.1.3320.2.1.90
MIB view Table view

Object

scalar mandatory Integer32 
Value at which the router will shutdown.
Typically the ambient air temperature that
will shut the router down. (e.g. 43)

Context

MIB
NMS-SYS
OID
.1.3.6.1.4.1.3320.2.1.90
Type
scalar
Access
readonly
Status
mandatory
Parent
nmslsystem
Siblings
111

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nmsromId mandatory
This variable contains a printable octet string which contains the System Bootstrap description and version identification.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.1
nmsbufferElMax mandatory
Contains the maximum number of buffer elements.
scalarInteger32.1.3.6.1.4.1.3320.2.1.10
nmsenvTestPt5last mandatory
Value of TestPt5 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.100
nmsenvTestPt6last mandatory
Value of TestPt6 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.101
nmsenvTestPt1warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.102
nmsenvTestPt2warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.103
nmsenvTestPt3warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.104
nmsenvTestPt4warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.105
nmsenvTestPt5warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.106
nmsenvTestPt6warn mandatory
Is this test point at a warning level?
scalarEnumeration.1.3.6.1.4.1.3320.2.1.107
nmsenvFirmVersion mandatory
Description of Environmental Card firmware
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.108
nmsenvTechnicianID mandatory
Technician ID
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.109
nmsbufferElHit mandatory
Contains the number of buffer element hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.11
nmsenvType mandatory
The type of environmental card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.110
nmsenvBurnDate mandatory
The calibration / burn in date
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.111
nmsenvSerialNumber mandatory
Serial Number of environmental monitor card
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.112
nmsbufferElMiss mandatory
Contains the number of buffer element misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.12
nmsbufferElCreate mandatory
Contains the number of buffer element creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.13
nmsbufferSmSize mandatory
Contains the size of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.14
nmsbufferSmTotal mandatory
Contains the total number of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.15
nmsbufferSmFree mandatory
Contains the number of free small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.16
nmsbufferSmMax mandatory
Contains the maximum number of small buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.17
nmsbufferSmHit mandatory
Contains the number of small buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.18
nmsbufferSmMiss mandatory
Contains the number of small buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.19
nmswhyReload mandatory
This variable contains a printable octet string which contains the reason why the system was last restarted.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.2
nmsbufferSmTrim mandatory
Contains the number of small buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.20
nmsbufferSmCreate mandatory
Contains the number of small buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.21
nmsbufferMdSize mandatory
Contains the size of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.22
nmsbufferMdTotal mandatory
Contains the total number of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.23
nmsbufferMdFree mandatory
Contains the number of free medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.24
nmsbufferMdMax mandatory
Contains the maximum number of medium buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.25
nmsbufferMdHit mandatory
Contains the number of medium buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.26
nmsbufferMdMiss mandatory
Contains the number of medium buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.27
nmsbufferMdTrim mandatory
Contains the number of medium buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.28
nmsbufferMdCreate mandatory
Contains the number of medium buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.29
nmshostName mandatory
This variable represents the name of the host in printable ascii characters.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.3
nmsbufferBgSize mandatory
Contains the size of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.30
nmsbufferBgTotal mandatory
Contains the total number of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.31
nmsbufferBgFree mandatory
Contains the number of free big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.32
nmsbufferBgMax mandatory
Contains the maximum number of big buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.33
nmsbufferBgHit mandatory
Contains the number of big buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.34
nmsbufferBgMiss mandatory
Contains the number of big buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.35
nmsbufferBgTrim mandatory
Contains the number of big buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.36
nmsbufferBgCreate mandatory
Contains the number of big buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.37
nmsbufferLgSize mandatory
Contains the size of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.38
nmsbufferLgTotal mandatory
Contains the total number of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.39
nmsdomainName mandatory
This variable is the domain portion of the domain name of the host.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.4
nmsbufferLgFree mandatory
Contains the number of free large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.40
nmsbufferLgMax mandatory
Contains the maximum number of large buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.41
nmsbufferLgHit mandatory
Contains the number of large buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.42
nmsbufferLgMiss mandatory
Contains the number of large buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.43
nmsbufferLgTrim mandatory
Contains the number of large buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.44
nmsbufferLgCreate mandatory
Contains the number of large buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.45
nmsbufferFail mandatory
Count of the number of buffer allocation failures.
scalarInteger32.1.3.6.1.4.1.3320.2.1.46
nmsbufferNoMem mandatory
Count of the number of buffer create failures due to no free memory.
scalarInteger32.1.3.6.1.4.1.3320.2.1.47
nmsnetConfigAddr mandatory
Holds the address of the host that supplied the network-confg file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.48
nmsnetConfigName mandatory
Holds the name of the network configuration file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.49
nmsauthAddr mandatory
This variable contains the last SNMP authorization failure IP address.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.5
nmsnetConfigSet mandatory
Cause the loading of a new network-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.50
nmshostConfigAddr obsolete
Contains the address of the host that provided the host-config file.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.51
nmshostConfigName obsolete
Contains the name of the last configured host-confg file.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.52
nmshostConfigSet obsolete
Cause the loading of a new host-confg file using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.53
nmswriteMem mandatory
Write configuration into non-volatile memory / erase config memory if 0.
scalarInteger32.1.3.6.1.4.1.3320.2.1.54
nmswriteNet mandatory
Write configuration to host using TFTP.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.55
nmsbusyPer mandatory
CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler.
scalarInteger32.1.3.6.1.4.1.3320.2.1.56
nmsavgBusy1 mandatory
1 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.3320.2.1.57
nmsavgBusy5 mandatory
5 minute exponentially-decayed moving average of the CPU busy percentage.
scalarInteger32.1.3.6.1.4.1.3320.2.1.58
nmsidleCount mandatory
NMS internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.3320.2.1.59
nmsbootHost mandatory
Contains the IP address of the host that supplied the currently running software.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.6
nmsidleWired mandatory
NMS internal variable. not to be used
scalarInteger32.1.3.6.1.4.1.3320.2.1.60
nmsContactInfo mandatory
NMS's name and address
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.61
nmsbufferHgSize mandatory
Contains the size of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.62
nmsbufferHgTotal mandatory
Contains the total number of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.63
nmsbufferHgFree mandatory
Contains the number of free huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.64
nmsbufferHgMax mandatory
Contains the maximum number of huge buffers.
scalarInteger32.1.3.6.1.4.1.3320.2.1.65
nmsbufferHgHit mandatory
Contains the number of huge buffer hits.
scalarInteger32.1.3.6.1.4.1.3320.2.1.66
nmsbufferHgMiss mandatory
Contains the number of huge buffer misses.
scalarInteger32.1.3.6.1.4.1.3320.2.1.67
nmsbufferHgTrim mandatory
Contains the number of huge buffer trims.
scalarInteger32.1.3.6.1.4.1.3320.2.1.68
nmsbufferHgCreate mandatory
Contains the number of huge buffer creates.
scalarInteger32.1.3.6.1.4.1.3320.2.1.69
nmsping obsolete
The ping mib object is obsolete as of IOS 10.2 It has been superseded by the NMS Ping MIB
scalarInteger32.1.3.6.1.4.1.3320.2.1.7
nmsnetConfigProto mandatory
Holds the protocol that supplied the network-confg file.
scalarInteger32.1.3.6.1.4.1.3320.2.1.70
nmshostConfigProto mandatory
Holds the protocol that supplied the host- confg file.
scalarInteger32.1.3.6.1.4.1.3320.2.1.71
nmssysConfigAddr mandatory
Holds the address of the host that supplied the system boot image.
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3320.2.1.72
nmssysConfigName mandatory
Holds the name of the system boot image.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.73
nmssysConfigProto mandatory
Holds the protocol that supplied the system boot image.
scalarInteger32.1.3.6.1.4.1.3320.2.1.74
nmssysClearARP mandatory
Perform a clearing of the entire ARP cache and invalidation of route caches.
scalarInteger32.1.3.6.1.4.1.3320.2.1.75
nmssysClearInt mandatory
Clear interface given IfIndex as value.
scalarInteger32.1.3.6.1.4.1.3320.2.1.76
nmsenvPresent mandatory
Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support
scalarInteger32.1.3.6.1.4.1.3320.2.1.77
nmsenvTestPt1Descr mandatory
Description of the test point 1. Typically ambient air or the temperature of air entering the router
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.78
nmsenvTestPt1Measure mandatory
Current value of test point 1. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.3320.2.1.79
nmsfreeMem obsolete
The freeMem mib object is obsolete as of IOS 11.1 It has been replaced with the NMS memory pool mib
scalarInteger32.1.3.6.1.4.1.3320.2.1.8
nmsenvTestPt2Descr mandatory
Description of the test point 2. Typically airflow or the temperature of air leaving the router
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.80
nmsenvTestPt2Measure mandatory
Current value of test point 2. Typically a temperature in centigrade.
scalarInteger32.1.3.6.1.4.1.3320.2.1.81
nmsenvTestPt3Descr mandatory
Description of the test point 3. Typically +5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.82
nmsenvTestPt3Measure mandatory
Current value of test point 3. Typically the value in millivolts of the +5v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.83
nmsenvTestPt4Descr mandatory
Description of the test point 4. Typically +12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.84
nmsenvTestPt4Measure mandatory
Current value of test point 4. Typically the value in millivolts of the +12v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.85
nmsenvTestPt5Descr mandatory
Description of the test point 5. Typically -12 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.86
nmsenvTestPt5Measure mandatory
Current value of test point 5. Typically the value in millivolts of the -12v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.87
nmsenvTestPt6Descr mandatory
Description of the test point 6. Typically -5 volt
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3320.2.1.88
nmsenvTestPt6Measure mandatory
Current value of test point 6. Typically the value in millivolts of the -5v supply
scalarInteger32.1.3.6.1.4.1.3320.2.1.89
nmsbufferElFree mandatory
Contains the number of free buffer elements.
scalarInteger32.1.3.6.1.4.1.3320.2.1.9
nmsenvTestPt2MarginVal mandatory
Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58)
scalarInteger32.1.3.6.1.4.1.3320.2.1.91
nmsenvTestPt3MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.92
nmsenvTestPt4MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.93
nmsenvTestPt5MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.94
nmsenvTestPt6MarginPercent mandatory
+/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt
scalarInteger32.1.3.6.1.4.1.3320.2.1.95
nmsenvTestPt1last mandatory
Value of TestPt1 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.96
nmsenvTestPt2last mandatory
Value of TestPt2 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.97
nmsenvTestPt3last mandatory
Value of TestPt3 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.98
nmsenvTestPt4last mandatory
Value of TestPt4 when last shutdown occurred.
scalarInteger32.1.3.6.1.4.1.3320.2.1.99