actionSeqStatistics
NMS-QOS-EXT-MIB ·
.1.3.6.1.4.1.3320.150.20.1.35
Object
column
r/w
Enumeration
Flow statistics in sequence. 1 means to count the number of flow, and 2 means not to count the number of flow.
Context
- MIB
- NMS-QOS-EXT-MIB
- OID
.1.3.6.1.4.1.3320.150.20.1.35- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- policyMapSeqEntry
- Table
- policyMapSeqTable
- Siblings
- 69
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | count |
2 | not-count |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| policyMapSeqName Indexs of policy map. The length is 1-20. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3320.150.20.1.1 |
| classifySeqDscp The dscp value to match in sequence. The range is 0-63. 64 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.10 |
| classifySeqVlanID The vlanID to match in sequence. The range is 1-4094. 4095 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.11 |
| classifySeqVlan2ID The vlan range to match in sequence. This value is upper limitation, and classifyVlanID is down limitation. The range is 1-4094. 4095 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.12 |
| classifySeqVlanMask The mask of vlan to match in sequence. This value is used with classifyVlanID. The range is 1-0xFFF. 0 means not to match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.13 |
| classifySeqIVlanID The inner vlanID to match in sequence. The range is 1-4094. 4095 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.14 |
| classifySeqIVlan2ID The inner vlan range to match in sequence. This value is upper limitation, and classifyIVlanID is down limitation. The range is 1-4094. 4095 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.15 |
| classifySeqIVlanMask The mask of inner vlan to match in sequence. This value is used with classifyIVlanID. The range is 1-0xFFF. 0 means not to match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.16 |
| classifySeqCos The cos value to match in sequence. The range is 0-7. 8 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.17 |
| classifySeqICos The inner cos value to match in sequence. The range is 0-7. 8 means not to match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.18 |
| classifySeqEtherType The ethernet type to match in sequence. The range is 0-0xFFFF. 0 means not to match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.19 |
| policyMapSeqNumber Indexs of policy map sequence. The range is 1-20. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.2 |
| classifySeqArpRequest Match arp request in sequence. 1 means match, and 2 means not to match. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.20 |
| classifySeqArpReply Match arp reply in sequence. 1 means match, and 2 means not to match. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.21 |
| classifySeqAny Match any in sequence. 1 means match, and 2 means not to match. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.22 |
| actionSeqBandwidth Rate limitation in sequence. 0 means no rate limitation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.23 |
| actionSeqCos Modify cos value in sequence. The range is 0-7. 8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.24 |
| actionSeqICos Modify inner cos value in sequence. The range is 0-7.8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.25 |
| actionSeqQueueID The queueID frame in in sequence. The range is 1-8. 9 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.26 |
| actionSeqDscp Modify dscp value in sequence. The range is 0-63. 64 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.27 |
| actionSeqTos Modify tos value in sequence. The range is 0-7. 8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.28 |
| actionSeqVlanOperation The operation of tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.29 |
| policyMapSeqRowStatus Row status. It used to add, delete, or modify policy map sequence. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3320.150.20.1.3 |
| actionSeqVlanID The vlanID to replace or add in sequence. The range is 1-4094. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.30 |
| actionSeqIVlanOperation The operation of inner tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.31 |
| actionSeqIVlanID The inner vlanID to replace or add in sequence. The range is 1-4094. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.32 |
| actionSeqRedirect The diID of interface frame send to in sequence. 0 means not to redirect. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.33 |
| actionSeqMirror SessionID of mirror in sequence. 0 means not to mirror. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.34 |
| actionSeqDrop Drop packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.36 |
| actionSeqForward Forward packet in sequence. 1 means to forward the packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.37 |
| actionSeqMacAddress The new destination mac address of frame to be modified in sequence. 0 means not to modify destination mac address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3320.150.20.1.38 |
| actionSeqCir The commited information rate in sequence. 0 means no cir bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.39 |
| classifySeqIPV4AclDelete Match ip acl or not in sequence. 1 means to match ip acl, and 2 means not to match ip acl. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.4 |
| actionSeqPir The peak information rate in sequence. 0 means no pir bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.40 |
| actionSeqEir The excess information rate in sequence. 0 means no eir bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.41 |
| actionSeqBc The commited burst size in sequence. 0 means no commited burst size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.42 |
| actionSeqBe The excess information rate in sequence. 0 means no eir bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.43 |
| actionSeqEbs The excess burst size in sequence. 0 means no excess burst size . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.44 |
| actionSeqCopyCos Copy inner cos to outer cos in sequence. 1 means copy, and 2 means no copy. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.45 |
| actionSeqCopyToCpu Copy packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.46 |
| actionSeqColorBlind Set color mode in sequence.1 means to set blind mode.2 means to set aware mode. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.47 |
| actionSeqGreenForwared Forward green packet in sequence. 1 means to forward green packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.48 |
| actionSeqGreenQueue The queueID frame in for green packets in sequence. The range is 1-8. 9 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.49 |
| classifySeqIPV4AclName The name of ip acl to match in sequence. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3320.150.20.1.5 |
| actionSeqGreenCos Modify cos value for green packets in sequence. The range is 0-7. 8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.50 |
| actionSeqGreenDroppreference Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.51 |
| actionSeqGreenCopyToCpu Copy green packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.52 |
| actionSeqYellowDrop Drop yellow packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.53 |
| actionSeqYellowForwared Forward yellow packet in sequence. 1 means to forward packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.54 |
| actionSeqYellowQueue The queueID frame in for yellow packets in sequence. The range is 1-8. 9 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.55 |
| actionSeqYellowCos Modify cos value for yellow packets in sequence. The range is 0-7. 8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.56 |
| actionSeqYellowDroppreference Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.57 |
| actionSeqYellowCopyToCpu Copy yellow packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.58 |
| actionSeqRedDrop Drop red packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.59 |
| classifySeqIPV6AclDelete Match ipv6 acl or not in sequence. 1 means to match ipv6 acl, and 2 means not to match ipv6 acl. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.6 |
| actionSeqRedForwared Forward red packet in sequence. 1 means to forward packet, and 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.60 |
| actionSeqRedQueue The queueID frame in for red packets in sequence. The range is 1-8. 9 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.61 |
| actionSeqRedCos Modify cos value for red packets in sequence. The range is 0-7. 8 means not to modify. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.62 |
| actionSeqRedDroppreference Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.63 |
| actionSeqRedCopyToCpu Copy red packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.64 |
| actionSeqCirDel Delete Cir actions in sequence.1 means to delete Cir actions. 2 means not to care about this action. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.65 |
| classifySeqPrecedence The precedence to match in sequence. The range is 0-7. 8 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.66 |
| classifySeqTos The tos to match in sequence. The range is 0-15. 16 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.67 |
| classifySeqDiffserv The Diffserv to match in sequence. The range is 0-255. 256 means not to match. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.68 |
| classifySeqDstport The destination port to match in sequence. 0 means not to match. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3320.150.20.1.69 |
| classifySeqIPV6AclName The name of ipv6 acl to match in sequence. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3320.150.20.1.7 |
| actionSeqRedirctPortAggregator The aggregrate group id frame send to in sequence. 0 means not to redirect. | column | Integer32 | .1.3.6.1.4.1.3320.150.20.1.70 |
| classifySeqMacAclDelete Match mac acl or not in sequence. 1 means to match mac acl, and 2 means not to match mac acl. | column | Enumeration | .1.3.6.1.4.1.3320.150.20.1.8 |
| classifySeqMacAclName The name of mac acl to match in sequence. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3320.150.20.1.9 |