actionSeqRedirctPortAggregator

NMS-QOS-EXT-MIB · .1.3.6.1.4.1.3320.150.20.1.70
MIB view Table view

Object

column r/w Integer32 
The aggregrate group id  frame send to in sequence. 0 means not to redirect.

Context

MIB
NMS-QOS-EXT-MIB
OID
.1.3.6.1.4.1.3320.150.20.1.70
Type
column
Access
readwrite
Status
current
Parent
policyMapSeqEntry
Table
policyMapSeqTable
Siblings
69

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-9999

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
policyMapSeqName
Indexs of policy map. The length is 1-20.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3320.150.20.1.1
classifySeqDscp
The dscp value to match in sequence. The range is 0-63. 64 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.10
classifySeqVlanID
The vlanID to match in sequence. The range is 1-4094. 4095 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.11
classifySeqVlan2ID
The vlan range to match in sequence. This value is upper limitation, and classifyVlanID is down limitation. The range is 1-4094. 4095 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.12
classifySeqVlanMask
The mask of vlan to match in sequence. This value is used with classifyVlanID. The range is 1-0xFFF. 0 means not to match.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.13
classifySeqIVlanID
The inner vlanID to match in sequence. The range is 1-4094. 4095 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.14
classifySeqIVlan2ID
The inner vlan range to match in sequence. This value is upper limitation, and classifyIVlanID is down limitation. The range is 1-4094. 4095 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.15
classifySeqIVlanMask
The mask of inner vlan to match in sequence. This value is used with classifyIVlanID. The range is 1-0xFFF. 0 means not to match.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.16
classifySeqCos
The cos value to match in sequence. The range is 0-7. 8 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.17
classifySeqICos
The inner cos value to match in sequence. The range is 0-7. 8 means not to match.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.18
classifySeqEtherType
The ethernet type to match in sequence. The range is 0-0xFFFF. 0 means not to match.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.19
policyMapSeqNumber
Indexs of policy map sequence. The range is 1-20.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.2
classifySeqArpRequest
Match arp request in sequence. 1 means match, and 2 means not to match.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.20
classifySeqArpReply
Match arp reply in sequence. 1 means match, and 2 means not to match.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.21
classifySeqAny
Match any in sequence. 1 means match, and 2 means not to match.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.22
actionSeqBandwidth
Rate limitation in sequence. 0 means no rate limitation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.23
actionSeqCos
Modify cos value in sequence. The range is 0-7. 8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.24
actionSeqICos
Modify inner cos value in sequence. The range is 0-7.8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.25
actionSeqQueueID
The queueID frame in in sequence. The range is 1-8. 9 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.26
actionSeqDscp
Modify dscp value in sequence. The range is 0-63. 64 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.27
actionSeqTos
Modify tos value in sequence. The range is 0-7. 8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.28
actionSeqVlanOperation
The operation of tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.29
policyMapSeqRowStatus
Row status. It used to add, delete, or modify policy map sequence.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3320.150.20.1.3
actionSeqVlanID
The vlanID to replace or add in sequence. The range is 1-4094.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.30
actionSeqIVlanOperation
The operation of inner tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.31
actionSeqIVlanID
The inner vlanID to replace or add in sequence. The range is 1-4094.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.32
actionSeqRedirect
The diID of interface frame send to in sequence. 0 means not to redirect.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.33
actionSeqMirror
SessionID of mirror in sequence. 0 means not to mirror.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.34
actionSeqStatistics
Flow statistics in sequence. 1 means to count the number of flow, and 2 means not to count the number of flow.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.35
actionSeqDrop
Drop packet in sequence. 1 means to drop the packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.36
actionSeqForward
Forward packet in sequence. 1 means to forward the packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.37
actionSeqMacAddress
The new destination mac address of frame to be modified in sequence. 0 means not to modify destination mac address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3320.150.20.1.38
actionSeqCir
The commited information rate in sequence. 0 means no cir bandwidth.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.39
classifySeqIPV4AclDelete
Match ip acl or not in sequence. 1 means to match ip acl, and 2 means not to match ip acl.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.4
actionSeqPir
The peak information rate in sequence. 0 means no pir bandwidth.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.40
actionSeqEir
The excess information rate in sequence. 0 means no eir bandwidth.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.41
actionSeqBc
The commited burst size in sequence. 0 means no commited burst size.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.42
actionSeqBe
The excess information rate in sequence. 0 means no eir bandwidth.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.43
actionSeqEbs
The excess burst size in sequence. 0 means no excess burst size .
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.44
actionSeqCopyCos
Copy inner cos to outer cos in sequence. 1 means copy, and 2 means no copy.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.45
actionSeqCopyToCpu
Copy packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.46
actionSeqColorBlind
Set color mode in sequence.1 means to set blind mode.2 means to set aware mode.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.47
actionSeqGreenForwared
Forward green packet in sequence. 1 means to forward green packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.48
actionSeqGreenQueue
The queueID frame in for green packets in sequence. The range is 1-8. 9 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.49
classifySeqIPV4AclName
The name of ip acl to match in sequence.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3320.150.20.1.5
actionSeqGreenCos
Modify cos value for green packets in sequence. The range is 0-7. 8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.50
actionSeqGreenDroppreference
Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.51
actionSeqGreenCopyToCpu
Copy green packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.52
actionSeqYellowDrop
Drop yellow packet in sequence. 1 means to drop the packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.53
actionSeqYellowForwared
Forward yellow packet in sequence. 1 means to forward packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.54
actionSeqYellowQueue
The queueID frame in for yellow packets in sequence. The range is 1-8. 9 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.55
actionSeqYellowCos
Modify cos value for yellow packets in sequence. The range is 0-7. 8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.56
actionSeqYellowDroppreference
Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.57
actionSeqYellowCopyToCpu
Copy yellow packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.58
actionSeqRedDrop
Drop red packet in sequence. 1 means to drop the packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.59
classifySeqIPV6AclDelete
Match ipv6 acl or not in sequence. 1 means to match ipv6 acl, and 2 means not to match ipv6 acl.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.6
actionSeqRedForwared
Forward red packet in sequence. 1 means to forward packet, and 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.60
actionSeqRedQueue
The queueID frame in for red packets in sequence. The range is 1-8. 9 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.61
actionSeqRedCos
Modify cos value for red packets in sequence. The range is 0-7. 8 means not to modify.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.62
actionSeqRedDroppreference
Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.63
actionSeqRedCopyToCpu
Copy red packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.64
actionSeqCirDel
Delete Cir actions in sequence.1 means to delete Cir actions. 2 means not to care about this action.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.65
classifySeqPrecedence
The precedence to match in sequence. The range is 0-7. 8 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.66
classifySeqTos
The tos to match in sequence. The range is 0-15. 16 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.67
classifySeqDiffserv
The Diffserv to match in sequence. The range is 0-255. 256 means not to match.
columnInteger32.1.3.6.1.4.1.3320.150.20.1.68
classifySeqDstport
The destination port to match in sequence. 0 means not to match.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3320.150.20.1.69
classifySeqIPV6AclName
The name of ipv6 acl to match in sequence.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3320.150.20.1.7
classifySeqMacAclDelete
Match mac acl or not in sequence. 1 means to match mac acl, and 2 means not to match mac acl.
columnEnumeration.1.3.6.1.4.1.3320.150.20.1.8
classifySeqMacAclName
The name of mac acl to match in sequence.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3320.150.20.1.9