disabletx

NMS-HAL-IF-MIB · .1.3.6.1.4.1.3320.9.63.1.3.1.13

MIB view Table view

Object

column r/w Enumeration

disable port send config. The range is 0-1 0-enable, 1-disable.

Context

MIB: NMS-HAL-IF-MIB
OID: .1.3.6.1.4.1.3320.9.63.1.3.1.13
Type: column
Access: readwrite
Status: current
Parent: physicalIfConfigEntry
Table: physicalIfConfigTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	enable
`1`	disable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ifConfigIndex Index of interface. The same value as ifIndex in ifTable of RFC1213.	column	Integer32	`.1.3.6.1.4.1.3320.9.63.1.3.1.1`
interPacketGap InterPacketGap config. The range is 8-27 (unit:byte). default is 12.	column	Integer32	`.1.3.6.1.4.1.3320.9.63.1.3.1.10`
singlefiber singlefiber tx or rx config. The range is 0-2 0-disable ,1-rx, 2-tx.	column	Integer32	`.1.3.6.1.4.1.3320.9.63.1.3.1.11`
disablerx disable port recieve config. The range is 0-1 0-enable, 1-disable.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.12`
keepalive Loopback detect of interface. The range is 0-32767. 0 means disable. Default is 0(disable).	column	Integer32	`.1.3.6.1.4.1.3320.9.63.1.3.1.2`
speed Interface speed. Only valid for non-PON interface. 1-auto, 2-10M, 3-100M, 4-1000M, 5-10000M. Default is auto.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.3`
duplex Interface duplex. Only valid for non-PON interface. 1-auto, 2-full, 3-half. Default is auto.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.4`
medium Interface medium. Only valid for non-PON interface. 1-auto, 2-copper, 3-fiber. Default is auto.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.5`
fiberAutoConfig Fiber port auto config mode, include speed and duplex. 1-enable, 2-disable. Default is disable.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.6`
flowControl Interface flow control config. 1-on, 2-off. Default is off.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.7`
errorFrameCheck Error frame check config. 1-enable, 2-disable. Default is disable.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.8`
phyIfType Port initial type. 1-copper, 2-fiber, 3-combo, 4-other.	column	Enumeration	`.1.3.6.1.4.1.3320.9.63.1.3.1.9`