ntcTsOIpInTsEncapProtocol
NEWTEC-TSOVERIPIN-MIB ·
.1.3.6.1.4.1.5835.5.2.600.1.3
Object
scalar
r/w
Enumeration
Encapsulation protocol used for the received TS over IP functionality (UDP, RTP and RTP with FEC).
Context
- MIB
- NEWTEC-TSOVERIPIN-MIB
- OID
.1.3.6.1.4.1.5835.5.2.600.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ntcTsOIpInObjects
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | udp |
1 | rtp |
2 | rtpfec |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcTsOIpInEnable Enable or disable TS (Transport Stream) over IP reception. | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.600.1.1 |
| ntcTsOIpInInputTsBitRate TS input rate in bps used with a constant bitrate input traffic profile.
Current devices support a range of 10 to 250000000 bps. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.600.1.10 |
| ntcTsOIpInMonitor Container holding ntcTsOIpInMonitor definitions. | node | - | .1.3.6.1.4.1.5835.5.2.600.1.11 |
| ntcTsOIpInAlarm Container holding ntcTsOIpInAlarm definitions. | node | - | .1.3.6.1.4.1.5835.5.2.600.1.12 |
| ntcTsOIpInMulticastSourceA Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | scalar | NEWTEC-TC-MIBNtcNetworkAddress | .1.3.6.1.4.1.5835.5.2.600.1.13 |
| ntcTsOIpInMulticastSourceB Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | scalar | NEWTEC-TC-MIBNtcNetworkAddress | .1.3.6.1.4.1.5835.5.2.600.1.14 |
| ntcTsOIpInInputRateType When the operator selects 'User Defined', the actual input rate and the
control loop type needs to be specified further. In the other case, PCR PID
and control loop type is used. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.600.1.15 |
| ntcTsOIpInAutoPcrDetection Enable or disable Auto PCR Detection. | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.600.1.16 |
| ntcTsOIpInPcrPid PCR PID. | scalar | Unsigned32 | .1.3.6.1.4.1.5835.5.2.600.1.17 |
| ntcTsOIpInInputSelection Select the input interface for the TS over IP functionality. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.600.1.2 |
| ntcTsOIpInIpAddressType Configuration of the IP address type for TS over IP reception. (unicast or
multicast) | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.600.1.4 |
| ntcTsOIpInMulticastAddress Define the multicast IP address used to receive the TS over IP data
functionality. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5835.5.2.600.1.5 |
| ntcTsOIpInUdpPort Configure the UDP port on which the TS over IP stream is received. | scalar | Unsigned32 | .1.3.6.1.4.1.5835.5.2.600.1.6 |
| ntcTsOIpInTrafficProfile Configure the TS input traffic profile for the TS stream (CBR=constant or
VBR=variable bitrate). | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.600.1.7 |
| ntcTsOIpInMaxTrafficJitter deprecated The maximum traffic jitter that can be introduced by the IP network, for the
TS Over IP input traffic. Current devices support a range of 0 to 150 ms. | scalar | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.600.1.8 |
| ntcTsOIpInMaxBufferDelay The maximum delay introduced by the device to compensate jitter introduced by
the IP network. This is only relevant for CBR traffic. | scalar | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.600.1.9 |