ntcProtTsOIpInMonSourceInfo
NEWTEC-PROTECTEDTSOVERIPIN-MIB ·
.1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.6
Object
column
OctetString
Displays the IP address (and UDP port) of the source that is generating the TS over IP traffic.
Context
- MIB
- NEWTEC-PROTECTEDTSOVERIPIN-MIB
- OID
.1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ntcProtTsOIpInMonEntry
- Table
- ntcProtTsOIpInMonTable
- Siblings
- 17
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcProtTsOIpInMonName Name of the output monitor | column | OctetString | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.1 |
| ntcProtTsOIpInMonRtpColFecInCnt Displays the number of received (input) RTP column FEC packets. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.10 |
| ntcProtTsOIpInMonRtpRowFecInCnt Displays the number of received RTP row FEC packets. (Only applicable when RTP
with FEC is used.) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.11 |
| ntcProtTsOIpInMonTsOutCount Displays the number of valid TS packets leaving the TS over IP input
processing. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.12 |
| ntcProtTsOIpInMonTsDropCount Number of dropped TS packets. (When RTP is used the number of dropped TS
packets in the RTP frame is counted.) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.13 |
| ntcProtTsOIpInMonTsOverflowCount Displays the number of TS packets that are dropped because of an overflow
situation. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.14 |
| ntcProtTsOIpInMonRtpDropCount Displays the number of dropped RTP packets. (This is only applicable when RTP
is used.) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.15 |
| ntcProtTsOIpInMonRtpFecDropCount Displays the number of dropped uncorrectable packets. (This is only applicable
when RTP-FEC is used.) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.16 |
| ntcProtTsOIpInMonRtpRepairCount Displays the number of repaired RTP packets by using the received FEC
information. (This is only applicable for RTP with FEC) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.17 |
| ntcProtTsOIpInActivePcrPid Active PCR PID. | column | Unsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.18 |
| ntcProtTsOIpInMonMeasInTsBitRate Displays the measured TS over IP input TS bit rate in bps. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.2 |
| ntcProtTsOIpInMonBufferDelay The delay introduced by the device to compensate the jitter introduced by the
IP network. This is only relevant for CBR traffic. | column | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.3 |
| ntcProtTsOIpInMonMinBufferFill The measured minimum buffer delay in the buffer which compensate the jitter of
the IP network. This is only relevant for CBR traffic. | column | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.4 |
| ntcProtTsOIpInMonMaxBufferFill The measured maximum buffer delay in the buffer which compensate the jitter of
the IP network. This is only relevant for CBR traffic. | column | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.5 |
| ntcProtTsOIpInMonRtpFecScheme Displays the type of Rtp FEC Scheme currently used (if any). | column | OctetString | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.7 |
| ntcProtTsOIpInMonTsInCount Displays the Number of received TS packets in UDP mode. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.8 |
| ntcProtTsOIpInMonRtpInCount Displays the number of received RTP packets. (only applicable when RTP is
used) | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.9 |