ntcProtTsOIpInInputRateType
NEWTEC-PROTECTEDTSOVERIPIN-MIB ·
.1.3.6.1.4.1.5835.5.2.9400.1.3.1.10
Object
column
r/w
Enumeration
When the operator selects 'User Defined', the actual input rate and the control loop type needs to be specified further. In the other case, PCR PID and control loop type is used.
Context
- MIB
- NEWTEC-PROTECTEDTSOVERIPIN-MIB
- OID
.1.3.6.1.4.1.5835.5.2.9400.1.3.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntcProtTsOIpInConfEntry
- Table
- ntcProtTsOIpInConfTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | userdefined |
1 | pcr |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcProtTsOIpInConfName Name of the configuration | column | OctetString | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.1 |
| ntcProtTsOIpInAutoPcrDetection Enable or disable Auto PCR Detection. | column | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.11 |
| ntcProtTsOIpInPcrPid PCR PID. | column | Unsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.12 |
| ntcProtTsOIpInMaxBufferDelay The maximum delay introduced by the device to compensate jitter introduced by
the IP network. This is only relevant for CBR traffic. | column | ms SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.13 |
| ntcProtTsOIpInInputTsBitRate TS input rate in bps used with a constant bitrate input traffic profile.
Current devices support a range of 10 to 250000000 bps. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.14 |
| ntcProtTsOIpInInpSelection Select the input interface for the TS over IP functionality. | column | Enumeration | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.2 |
| ntcProtTsOIpInTsEncapProtocol Encapsulation protocol used for the received TS over IP functionality (UDP,
RTP and RTP with FEC). | column | Enumeration | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.3 |
| ntcProtTsOIpInIpAddressType Configuration of the IP address type for TS over IP reception. (unicast or
multicast) | column | Enumeration | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.4 |
| ntcProtTsOIpInMulticastAddress Define the multicast IP address used to receive the TS over IP data
functionality. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.5 |
| ntcProtTsOIpInMulticastSourceA Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | column | NEWTEC-TC-MIBNtcNetworkAddress | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.6 |
| ntcProtTsOIpInMulticastSourceB Multicast source Address. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) | column | NEWTEC-TC-MIBNtcNetworkAddress | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.7 |
| ntcProtTsOIpInUdpPort Configure the UDP port on which the TS over IP stream is received. | column | Unsigned32 | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.8 |
| ntcProtTsOIpInTrafficProfile Configure the TS input traffic profile for the TS stream (CBR=constant or
VBR=variable bitrate). | column | Enumeration | .1.3.6.1.4.1.5835.5.2.9400.1.3.1.9 |