ntcMultiDemodMonOperationalState
NEWTEC-MULTI-DEMOD-MIB ·
.1.3.6.1.4.1.5835.5.2.3300.1.5.1.20
Object
column
Enumeration
Identify the actual operational state of the component instance - Operational: Component instance ready for use - Failed: The component instance has 1 or more alarms which effect the proper function of the component - OffDuty: The component instance has a connection to another component instance, but that instance is not active. A good example of this is our Demod, which is a provider of TS or BBF instances, but only 1 type of instances are allowed at the same time. - Dependent: This means that the current component instance is linked with another component instance which is in alarm.
Context
- MIB
- NEWTEC-MULTI-DEMOD-MIB
- OID
.1.3.6.1.4.1.5835.5.2.3300.1.5.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ntcMultiDemodMonEntry
- Table
- ntcMultiDemodMonTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | operational |
1 | failed |
2 | offduty |
3 | dependent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcMultiDemodMonDemodId The id of the demodulator | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.1 |
| ntcMultiDemodMonFrameCounter Frame counter | column | frames SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.10 |
| ntcMultiDemodMonDummyFrameCtr Dummy PL frame counter | column | frames SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.11 |
| ntcMultiDemodMonErroredFrameCtr Errored frame counter | column | frames SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.12 |
| ntcMultiDemodMonCycleSlipCtr Cycle Slip counter | column | frames SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.13 |
| ntcMultiDemodMonLastModCod The most recently seen MODCOD | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.14 |
| ntcMultiDemodModCodStatsReset Reset MODCOD statistics | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.15 |
| ntcMultiDemodMonVber Viterbi Bit Error Rate | column | Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.16 |
| ntcMultiDemodMonBer The estimated bit error rate of the output data. | column | Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.17 |
| ntcMultiDemodMonEbNo Received Eb/No | column | dB Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.18 |
| ntcMultiDemodMonLinkMargin Link margin | column | dB Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.19 |
| ntcMultiDemodMonLbandInputLvl Input level measured on the full L-band range. A value of
-1000 indicates that the measurement is unreliably low. | column | dBm Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.2 |
| ntcMultiDemodMonLastNonDumModCod The most recently seen MODCOD | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.21 |
| ntcMultiDemodMonRollOff The receive filter Roll-off factor setting determines the spectrum excess
bandwidth by controlling the RCRO (Root Cosine Roll-off) factor of the matched
filter at the demodulator … | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.22 |
| ntcMultiDemodMonQefM QEF Margin | column | dB Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.23 |
| ntcMultiDemodMonSpectralInv Detected spectral inversion | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.24 |
| ntcMultiDemodMonVberClp Value Status. | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.25 |
| ntcMultiDemodMonBerClp Value Status. | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.26 |
| ntcMultiDemodMonQefMClp Value Status. | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.27 |
| ntcMultiDemodMonEbNoClp Value Status. | column | Enumeration | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.28 |
| ntcMultiDemodMonNonLinIndicAM This value gives an indication of the non-linearity AM of the carrier | column | % Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.29 |
| ntcMultiDemodMonCarrierInputLvl Input level measured on the selected carrier | column | dBm Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.3 |
| ntcMultiDemodMonEsNo Received Es/No Header | column | dB Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.4 |
| ntcMultiDemodMonPhaseNoiseIndic PhaseNoiseIndication | column | deg. FLOAT-TC-MIBFloat32TC | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.5 |
| ntcMultiDemodMonOffRefMask Offset To Reference Mask | column | dB Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.6 |
| ntcMultiDemodMonNonLinIndic This value gives an indication of the non-linearity PM of the carrier | column | % Integer32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.7 |
| ntcMultiDemodMonSymbolRate Tracked Symbol Rate of the received carrier | column | baud SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.8 |
| ntcMultiDemodMonCarrierOffset CarrierOffset | column | Hz FLOAT-TC-MIBFloat32TC | .1.3.6.1.4.1.5835.5.2.3300.1.5.1.9 |