dppipSuppressAlarms
NETI-TRUNK-MIB ·
.1.3.6.1.4.1.2928.2.3.1.1.3.1.47
Object
Suppression control for alarms from the DPP-IP interface. When set to `true', all alarms are suppressed.
Context
- MIB
- NETI-TRUNK-MIB
- OID
.1.3.6.1.4.1.2928.2.3.1.1.3.1.47- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dppipEntry
- Table
- dppipTable
- Siblings
- 50
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dppipIndex A value greater than zero that is unique for each DPP-IP
interface. The value for each DPP-IP interface must remain
constant at least from one re-initialization of the entity's
ne… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.1 |
| dppipRxUsedCapacity An estimate of the receive side physical layer capacity used
by the DPP-IP interface in bits per second. It represents a
minimum required capacity along the network path. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.10 |
| dppipDelayVariation The RMS (i.e. standard deviation) value of the DPP-IP path
delay variation in ns. This value represents a momentary
snapshot of the delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.11 |
| dppipOperStatus The current operational state of the interface. The
testing(3) state indicates that no operational frames can be
passed. | column | Enumeration | .1.3.6.1.4.1.2928.2.3.1.1.3.1.12 |
| dppipFailure A textual string describing a fault status on the DPP-IP
interface. The object presents an empty string if there are
no faults on the interface. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.3.1.1.3.1.13 |
| dppipReceivedFrames The total number of DPP-IP frames that have been received. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.14 |
| dppipMissingFrames The number of DPP-IP frames that were missing in the frame
sequence, i.e. the expected sequence numbers were not found
in the DPP-IP framing buffer. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.15 |
| dppipDeliveredFrames The total number of DPP-IP data frames that have been
delivered to the DTM interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.16 |
| dppipDroppedFrames The number of DPP-IP frames that have been received and have
not been processed since the interface was unable to align
them to the DPP-IP frame sequence. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.17 |
| dppipDuplicateFrames The number of DPP-IP frames that were received with a
sequence number of an already processed DPP-IP frame. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.18 |
| dppipReorderedFrames The number of DPP-IP frames that were received out
of order, but could still be aligned to the DPP-IP
frame sequence. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.19 |
| dppipName The textual name of the interface. The value of this object
should be the name of the DPP-IP interface as assigned by the
local device. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.3.1.1.3.1.2 |
| dppipLostFrames The number of missing DPP-IP data frames that could not be
delivered to the DTM interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.20 |
| dppipRecoveredFrames The number of missing DPP-IP data frames that were recovered
by the FEC procedure. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.21 |
| dppipSentFrames The total number of DPP-IP frames that have been sent. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.22 |
| dppipDelayVarPtp The point-to-point value of the DPP-IP path delay variation
in nanoseconds. The special value 0 means that the
measurement is incomplete | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.23 |
| dppipDelayVar999 The 99.9 percentile value of the DPP-IP path delay variation
given in nanoseconds. The special value 0 means that the
measurement is incomplete. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.24 |
| dppipAdminStatus The desired state of the interface. | column | Enumeration | .1.3.6.1.4.1.2928.2.3.1.1.3.1.25 |
| dppipVlan The VLAN identity associated to the DPP-IP interface. The
value 0 indicates that the DPP-IP interface does not belong
to a VLAN. The value -1 indicates that Ethernet frames from
… | column | Integer32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.26 |
| dppipDelayVar01 The 0.1 percentile value of the DPP-IP path delay variation
given in nanoseconds. The special value 0 means that the
measurement is incomplete. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.27 |
| dppipPrio The Ethernet priority for frames sent from the DPP-IP
interface. Ignored if frames are untagged (i.e. dppipVlan
is -1). | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.28 |
| dppipPhysIf A reference to an object representing the physical interface
that supports the DPP-IP interface. The special value .0.0
is used, when no such reference is available. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2928.2.3.1.1.3.1.29 |
| dppipAddress The IPv4 address of the DPP-IP interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2928.2.3.1.1.3.1.3 |
| dppipMtu The Maximum Transmission Unit of the DPP-IP interface,
i.e. the maximum size of the DPP-IP payload, including IP
header, UDP header and DPP-IP header. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.30 |
| dppipTtl The Time To Live of frames sent at the DPP-IP interface.
This value is set in the IP header. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.31 |
| dppipDscp The Differential Services Coding Point of frames sent at the
DPP-IP interface. This value is set in the IP header. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.32 |
| dppipRxSlotsPerFrame Number of DTM slots per received DPP-IP data frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.33 |
| dppipAvailTxSlots The maximum transmit slot rate (slots/frame) that can be
allocated at the DTM switch. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.34 |
| dppipAvailRxSlots The maximum receive slot rate (slots/frame) that can be
allocated at the DTM switch. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.35 |
| dppipMinUsageRatio The minimum allowed usage ratio (used slots/configured
slots) in per-mille, when dynamic trunk functionality is
used. 1000 is default and indicates that the Dynamic Trunk
functio… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.36 |
| dppipTxTranspSlots The DPP-IP interface's current transmit side capacity in
slots per DTM frame that is actually transported over
the. When Dynamic Trunk functionality is disabled this is
equal to d… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.37 |
| dppipRxTranspSlots The DPP-IP interface's current receive side capacity in
slots per DTM frame that is actually transported. When
Dynamic Trunk functionality is disabled this is equal to
dppipRxSlot… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.38 |
| dppipNomDTDelay The nominal extra delay in ns when the Dynamic Trunk
function is enabled.
Requires Dynamic Trunk function support equal to 1.1 or
higher. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.39 |
| dppipNetMask The subnet mask associated with the IP address of DPP-IP
interface. The value of the mask is an IP address with all
the network bits set to 1 and all the hosts bits set to 0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2928.2.3.1.1.3.1.4 |
| dppipTxFecMode The DPP-IP interface's current mode of operation of the
transmit side Forward Error Correction function (FEC). The
FEC function may be not used (fecNone), used for column
correcti… | column | FecMode | .1.3.6.1.4.1.2928.2.3.1.1.3.1.40 |
| dppipTxFecRows The DPP-IP interface's current number of data rows in the
transmit side Forward Error Correction (FEC) matrix. This
object is not applicable when dppipTxFecMode is fecNone. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.41 |
| dppipTxFecCols The DPP-IP interface's current number of data columns in the
transmit side Forward Error Correction (FEC) matrix. This
object is not applicable when dppipTxFecMode is fecNone. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.42 |
| dppipRxFecMode The DPP-IP interface's current mode of operation of the
receive side Forward Error Correction function (FEC). The FEC
function may be not used (fecNone), used for column
correctio… | column | FecMode | .1.3.6.1.4.1.2928.2.3.1.1.3.1.43 |
| dppipRxFecRows The DPP-IP interface's current number of data rows in the
receive side Forward Error Correction (FEC) matrix. This
object is not applicable when dppipRxFecMode is fecNone. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.44 |
| dppipRxFecCols The DPP-IP interface's current number of data columns in the
receive side Forward Error Correction (FEC) matrix. This
object is not applicable when dppipRxFecMode is fecNone. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.45 |
| dppipCntControl Controls the statistics counter monitoring. The statistics
monitoring is restarted and all counters set to 0, by writing
`reset' to this object. | column | Enumeration | .1.3.6.1.4.1.2928.2.3.1.1.3.1.46 |
| dppipSigFailFilter Signal fail filter hold-off time in milliseconds. Trail
Signal Fail conditions must be persistent during the hold-off
time, before operStatus is changed from `up' to `down'. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.48 |
| dppipDegThreshold The detection threshold for DEG alarm. A bad second is
declared when the number of errored blocks is equal to or
greater than the threshold, otherwise a good second is
declared. … | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.49 |
| dppipDefaultGateway The IPv4 address of the default gateway. Packets addressed to
a destination outside the subnet of the DPP-IP interface are
by default routed to this gateway. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2928.2.3.1.1.3.1.5 |
| dppipDegPeriod The persistence time for detection of DEG alarm as the number
of consecutive seconds with changed status (bad or good)
before the alarm is set or cleared. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.50 |
| dppipTolJitter The tolerated jitter and wander of the DPP-IP interface given
in microseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.51 |
| dppipPeerAddress The IPv4 address of the peer DPP-IP interface at the remote
end of the DTM trunk. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2928.2.3.1.1.3.1.6 |
| dppipTxSlots The DPP-IP interface's current transmit side capacity in
slots per DTM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.7 |
| dppipTxUsedCapacity An estimate of the transmit side physical layer capacity used
by the DPP-IP interface in bits per second. It represents a
minimum required capacity along the network path. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.8 |
| dppipRxSlots The DPP-IP interface's current receive side
capacity in slots per DTM frame. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.3.1.1.3.1.9 |