ethIfSrcPmReference
NETI-ETH-MIB ·
.1.3.6.1.4.1.2928.2.2.1.3.2.1.25
Object
column
SNMPv2-TCRowPointer
A reference to an object that presents performance data for the source side of the interface. The object is not part of this MIB.
Context
- MIB
- NETI-ETH-MIB
- OID
.1.3.6.1.4.1.2928.2.2.1.3.2.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ethIfEntry
- Table
- ethIfTable
- Siblings
- 46
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethIfIndex An index for the interface. The index is maintained across
restarts of the managed system. The management system may
require that the value of this object is within a certain
va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.1 |
| ethIfForwardingFunction The index (ethFwdIndex) in the ethFwdFuncTable of the
forwarding function that this interface belongs to. The
value -1 denotes that the interface does not belong to any
forwardin… | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.10 |
| ethIfAcceptableFrameTypes all(1). All frames, regardless of whether they have a VLAN
tag or not, shall be accepted.
vlanTagged(2). Only frames that contain a non-zero VLAN id
in the VLAN tag… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.11 |
| ethIfTransmittedFrameType vlanTagged(2). Forwarded frames are tagged according to
setting on ethFwdVLANMode.
untagged(3). VLAN tags on forwarded frames are removed
according to setting of et… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.12 |
| ethIfDefaultVLAN If an untagged frame is received on this interface, it will
be tagged with a VLAN having a VLAN id as specified in this
variable. The VLAN tag will be a customer or service tag a… | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.13 |
| ethIfDefaultEthernetPriority Specifies the Ethernet priority assigned to a frame that has
arrived via this port, and that does not have a VLAN tag.
Priority will only be assigned to the frame i… | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.14 |
| ethIfPriorityMode Selects the method to use when assigning a flow group to a
frame that arrives via this interface:
ethernet(1). The user bits are used.
diffserv(2). T… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.15 |
| ethIfDefaultTrafficClass Frames that do have any priority information are assigned
this traffic class. See ethDevCapMaxTrafficClass for max
value supported by the device. | column | TrafficClass | .1.3.6.1.4.1.2928.2.2.1.3.2.1.16 |
| ethIfFlowGroupMap Represents a flow group to traffic class map. The octet
string consists of eight octets, one for each flow group.
The position in the string represents the flow group, where
the … | column | OctetString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.17 |
| ethIfLearning Specifies if MAC learning is enabled on the interface.
on(1). MAC learning is enabled. The forwarding function
learns what interface to use for a destination by lo… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.18 |
| ethIfInSpeed An estimate of the interface's current input bandwidth in
bits per second. If the interface is a physical interface
(represented in ethDot3Table), then this value is the same
as … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.19 |
| ethIfIfIndex This variable uniquely identifies the interface in the
ifTable. The value is 0 if the interface is not present in
the ifTable. | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.2 |
| ethIfInHighSpeed An estimate of the interface's current input bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere i… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.20 |
| ethIfOutSpeed An estimate of the interface's current output bandwidth in
bits per second. If the interface is a physical interface
(represented in ethDot3Table), then this value is the same
as… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.21 |
| ethIfOutHighSpeed An estimate of the interface's current output bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.22 |
| ethIfVLANNextIndex Next available value of ethIfVLANSetIndex in
ethIfVLANSetTable for this interface. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.23 |
| ethIfLastChange The value of sysUpTime at the time when the operational
state or any configuration was last changed on this
interface. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2928.2.2.1.3.2.1.24 |
| ethIfSnkPmReference A reference to an object that presents performance data for
the sink side of the interface. The object is not part of
this MIB. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2928.2.2.1.3.2.1.26 |
| ethIfSrcDegThreshold Threshold in number of dropped frames per second for
generating a degraded second. A degraded second is
generated when the number of dropped frames are equal or
larger than the t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.27 |
| ethIfSnkDegThreshold Threshold in number of dropped frames per second for
generating a degraded second. A degraded second is
generated when the number of dropped frames are equal or
larger than the t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.28 |
| ethIfSrcDegPeriod Number of consecutive bad seconds that are needed for generating
degraded signal alarm and/or AIS. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.29 |
| ethIfName The name of the interface. If the interface is a physical
interface, it is named `eth<device>:<port>' where <device>
is the value of ethDevIndex, and <port> is the value of
ethIf… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.3 |
| ethIfSnkDegPeriod Number of consecutive bad seconds that are needed for generating
degraded signal alarm and/or AIS. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.30 |
| ethIfSrcReducedBitRateThreshold Reduced Bit Rate threshold in bits per second that is needed
for generating a major alarm and/or AIS. If the threshold
for the interface is greater than the maximum value
reporta… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.31 |
| ethIfSnkReducedBitRateThreshold Reduced Bit Rate threshold in bits per second that is needed
for generating a major alarm and/or AIS. If the threshold
for the interface is greater than the maximum value
reporta… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.32 |
| ethIfSrcReducedBitRateHighThreshold Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a major alarm and/or AIS. If this
object reports a value of `n' then the threshold value is
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.33 |
| ethIfSnkReducedBitRateHighThreshold Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a major alarm and/or AIS. If this
object reports a value of `n' then the threshold value is
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.34 |
| ethIfSrcReducedBitRateAIS Defines if Reduced Bit Rate signal shall result in
generation of AIS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.2.1.35 |
| ethIfSnkReducedBitRateAIS Defines if Reduced Bit Rate signal shall result in
generation of AIS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.2.1.36 |
| ethIfSnkDegAIS Defines if degraded signal on the sink interface shall
result in generation of AIS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.2.1.37 |
| ethIfSrcMinorReducedBitRateThreshold Reduced Bit Rate threshold in bits per second that is needed
for generating a minor alarm. If the threshold for the
interface is greater than the maximum value reportable by
this… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.38 |
| ethIfSnkMinorReducedBitRateThreshold Reduced Bit Rate threshold in bits per second that is needed
for generating a minor alarm. If the threshold
for the interface is greater than the maximum value
reportable by this… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.39 |
| ethIfType The type of interface. The value `unknown(1)' is presented
if required hardware is missing, or if it otherwise is not
possible to determined the type of interface. | column | EthInterfaceType | .1.3.6.1.4.1.2928.2.2.1.3.2.1.4 |
| ethIfSrcMinorReducedBitRateHighThreshold Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a minor alarm. If this object
reports a value of `n' then the threshold value is somewhere
i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.40 |
| ethIfSnkMinorReducedBitRateHighThreshold Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a minor alarm. If this object
reports a value of `n' then the threshold value is somewhere
i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.41 |
| ethIfSrcFailure A string describing the configuration or error status of the
source sub-interface. The string is the empty string if the
configuration is correct, otherwise a message describing … | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.42 |
| ethIfSnkFailure A string describing the configuration or error status of the
sink sub-interface. The string is the empty string if the
configuration is correct, otherwise a message describing th… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.43 |
| ethIfInterfaceGroup The index (ethIfIndex) in the ethIfTable of the interface
group that this interface belongs to. The value -1 denotes
that the interface does not belong to an interface group.
Not… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.44 |
| ethIfMaxMaxQueueFrames The maximum allowed value for the maximum queue size for
queues on the interface, ethIfQueueMaxFrames. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.45 |
| ethIfDefaultDropPrecedence Frames that do have any priority information are assigned
this drop precedence (DP). The drop precedence must be in
the range 0 to (ethDevCapDropPrecedenceLevels - 1). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.46 |
| ethIfDropPrecedenceMap Represents a flow group to drop precedence (DP) map. The
octet string consists of eight octets, one for each flow
group. The position in the string represents the flow
group, wh… | column | OctetString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.47 |
| ethIfCustomerId An identification number representing the customer or user
using the interface. The value could be used for e.g. Charge
Data Records. The value zero (0) indicates that no specifi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.2.1.5 |
| ethIfPurpose A string representing the purpose of the interface. The
string is for administrative purpose. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.6 |
| ethIfAdminStatus The administrative state of the interface. If the interface
represents a Ethernet Transport Service Trail Termination
Point (ETS TTP), then the variable controls the desired
state… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.7 |
| ethIfOperStatus The actual operational state of the interface. The value
should normally follow the administrative state
(ethIfAdminStatus).
up(1). The interface is up and operati… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.2.1.8 |
| ethIfFailure A string describing the configuration or error status of the
interface. The string is the empty string if the
configuration is correct, otherwise a message describing the
error. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.3.2.1.9 |