ethFwdRstpTimeSinceTopologyChange
NETI-ETH-MIB ·
.1.3.6.1.4.1.2928.2.2.1.2.4.1.3
Object
column
centi-seconds Timeout
The time in 1/100 seconds since the last topology change.
Context
- MIB
- NETI-ETH-MIB
- OID
.1.3.6.1.4.1.2928.2.2.1.2.4.1.3- Type
- column
- Access
- readonly
- Status
- current
- Units
- centi-seconds
- Parent
- ethFwdRstpEntry
- Table
- ethFwdRstpTable
- Siblings
- 15
Syntax
centi-seconds Timeout
- Source
- Timeout
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethFwdRstpBridgeIdentifier The unique identifier for this bridge. | column | BridgeIdentifier | .1.3.6.1.4.1.2928.2.2.1.2.4.1.1 |
| ethFwdRstpHelloTime The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of
the spanning tree, or trying to become so, in units of
hun… | column | centi-seconds Timeout | .1.3.6.1.4.1.2928.2.2.1.2.4.1.10 |
| ethFwdRstpForwardDelay The root bridge forward delay parameter, in units of
hundredths of a second. | column | centi-seconds Timeout | .1.3.6.1.4.1.2928.2.2.1.2.4.1.11 |
| ethFwdRstpBridgeMaxAge The value that all bridges use for MaxAge when this bridge
is acting as the root. An agent may return a badValue error
if a set is attempted to a value that is not a whole number… | column | centi-seconds Integer32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.12 |
| ethFwdRstpBridgeHelloTime The value that all bridges use for HelloTime when this
bridge is acting as the root. An agent may return a
badValue error if a set is attempted to a value that is not
a whole num… | column | centi-seconds Integer32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.13 |
| ethFwdRstpBridgeForwardDelay The value that all bridges use for ForwardDelay when this
bridge is acting as the root. An agent may return a
badValue error if a set is attempted to a value that is not
a whole … | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.14 |
| ethFwdRstpTxHoldCount The local bridge transmit hold count parameter. | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.15 |
| ethFwdRstpForceVersion Force the spanning tree protocol version to use for this
bridge:
stp(1). STP compatibility mode. Causes an RSTP Bridge to
use STP compatible BPDUs and timer values… | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.2.4.1.16 |
| ethFwdRstpPriority The local bridge priority. The value must be set in
increments of 4096. | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.2 |
| ethFwdRstpTopologyChangeCount The total number of topology changes detected by this bridge
since the management entity was last reset or initialized. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.4 |
| ethFwdRstpTopologyChange Set to `true(1)' when a topology change is in progress. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.2.4.1.5 |
| ethFwdRstpDesignatedRoot The bridge identifier of the root of the spanning tree, as
determined by the Spanning Tree Protocol, as executed by
this bridge. This value is used as the Root Identifier
paramet… | column | BridgeIdentifier | .1.3.6.1.4.1.2928.2.2.1.2.4.1.6 |
| ethFwdRstpRootPathCost The cost of the path to the root as seen from
this bridge. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2928.2.2.1.2.4.1.7 |
| ethFwdRstpRootPortName The name of the interface that offers the lowest cost path
from this bridge to the root bridge. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2928.2.2.1.2.4.1.8 |
| ethFwdRstpMaxAge The maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value th… | column | centi-seconds Timeout | .1.3.6.1.4.1.2928.2.2.1.2.4.1.9 |