ethDot3AutoNegotiate
NETI-ETH-MIB ·
.1.3.6.1.4.1.2928.2.2.1.3.5.1.1
Object
Controls the desired value of auto-negotiation:
true(1). Auto-negotiation shall be enabled. If the interface
does not allow auto-negotiation, then this object is ignored.
false(2). Auto-negotiation shall be disabled.
See ethDot3AutoNegotiateStatus for actual resulting status.
Context
- MIB
- NETI-ETH-MIB
- OID
.1.3.6.1.4.1.2928.2.2.1.3.5.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ethDot3Entry
- Table
- ethDot3Table
- Siblings
- 15
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethDot3SupportedSpeeds All supported speeds for ethDot3AdvertisedSpeed. Note that
this value depends on the SFP. | column | AdvertisedSpeed | .1.3.6.1.4.1.2928.2.2.1.3.5.1.10 |
| ethDot3ResetToDefaults Writing a zero (0) resets all the the settings on the
interface to its default values. | column | Integer32 | .1.3.6.1.4.1.2928.2.2.1.3.5.1.11 |
| ethDot3AutoNegotiateStatus Indicates if auto-negotiation is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.5.1.12 |
| ethDot3AutoNegotiateAllowed Indicates if auto-negotiation is permitted with the
current combination of interface type and speed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.5.1.13 |
| ethDot3AutoNegotiateMandatory Indicates if auto-negotiation is required with the
current combination of interface type and speed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.5.1.14 |
| ethDot3SupportedIfType All supported interface types on the interface. This
denotes what can be set on ethDot3SelectedIfType. Note that
this value depends on the SFP. | column | Bits | .1.3.6.1.4.1.2928.2.2.1.3.5.1.15 |
| ethDot3SelectedIfType Selected interface speed. A selected value of `auto(0)'
means that the interface type with the highest available
line speed will be used. See ethIfType for the currently
used ty… | column | EthInterfaceType | .1.3.6.1.4.1.2928.2.2.1.3.5.1.16 |
| ethDot3AdvertisedSpeed The link speeds that the interface shall advertise that it
supports.
If auto-negotiation is disabled, then use the highest set
link speed. | column | AdvertisedSpeed | .1.3.6.1.4.1.2928.2.2.1.3.5.1.2 |
| ethDot3AdvertisedDuplex The duplex settings that the interface shall advertise that
it supports. See ethDevCapAdvertisedDuplex for allowed duplex
settings on the device. | column | AdvertisedDuplex | .1.3.6.1.4.1.2928.2.2.1.3.5.1.3 |
| ethDot3AdvertisedFlowControl The flow control settings that the interface shall advertise
that it supports. If auto-negotiation is disabled
(ethDot3SAutoNegotiate), then this object describes the
flow contro… | column | AdvertisedFlowControl | .1.3.6.1.4.1.2928.2.2.1.3.5.1.4 |
| ethDot3ActiveSpeed The active links speed in Mbps. | column | Unsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.5.1.5 |
| ethDot3ActiveDuplex The active link duplex. If the interface is down, then
`notApplicable(3)' is presented. | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.5.1.6 |
| ethDot3ActiveFlowControl The active link flow control. If the interface is down, then
`notApplicable(5)' is presented. | column | Enumeration | .1.3.6.1.4.1.2928.2.2.1.3.5.1.7 |
| ethDot3ForceVLANTagged Specifies a set of VLAN ids for which frames shall be
forwarded with a tag although ethIfTransmittedFrameType is
set to `untagged(3)'. The setting of this variable has no
meaning… | column | VLANSet | .1.3.6.1.4.1.2928.2.2.1.3.5.1.8 |
| ethDot3ForceVLANUntagged Specifies a set of VLAN ids for which frames shall be
forwarded without a tag although ethIfTransmittedFrameType
is set to `vlanTagged(2)'. The setting of this variable has
no me… | column | VLANSet | .1.3.6.1.4.1.2928.2.2.1.3.5.1.9 |