chmgrODescrAcceptableBps
NETI-CHMGR-MIB ·
.1.3.6.1.4.1.2928.6.2.14.1.1.2.1.6
Object
The minimum payload capacity in bits per second for the service using the channel. If it is not possible to allocate this capacity, a channel will not be established. If the acceptable capacity is larger than the maximum value (4,294,967,295) bits per second, then the `chmgrODescrAcceptableMbps' must be used. If the capacity is greater than the maximum value of this object, then the this object should report the maximum value.
Context
- MIB
- NETI-CHMGR-MIB
- OID
.1.3.6.1.4.1.2928.6.2.14.1.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- chmgrODescriptionEntry
- Table
- chmgrODescriptionTable
- Siblings
- 19
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| chmgrODescrIndex Index for this entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.1 |
| chmgrODescrReestablishMethod The type of algorithm or method used to re-establish channels
that for some reason fail to be established or is torn down.
The methods are:
exponential(1)
Establish… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.10 |
| chmgrODescrMinInterval The minimum time in milliseconds between two attempts to
establish the channel. | column | Unsigned32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.11 |
| chmgrODescrMaxInterval The maximum time in milliseconds between two attempts to
establish the channel. This value must be larger than
chmgrODescrMinInterval. | column | Unsigned32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.12 |
| chmgrODescrEstablish Describes if the connection shall be established with the
defined parameters. The value is only valid if the
allowEstablish(4) bit in chmgrODescrCapabilites is set.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.13 |
| chmgrODescrNextDestTableIndex The value of the next available index for this connection
description in the chmgrODescrDestinationTable. | column | Unsigned32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.14 |
| chmgrODescrPrecedence A channel with precedence is established and torn down before
any channel without precedence.
true(1)
The channel has precedence.
false(2)
The channe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.15 |
| chmgrODescrSuppressAlarms Suppress generation of some alarms:
route(0)
Alarm raised if a service is not using its primary source route. | column | Bits | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.16 |
| chmgrODescrAcceptableMbps The minimum payload capacity in units of 1,000,000 bits per
second for the service using the channel. If it is not
possible to allocate this capacity, a channel will not be
estab… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.17 |
| chmgrODescrRequestedMbps The requested payload capacity in units of 1,000,000 bits per
second for the service using the channel. This object must
be used when requesting a capacity larger than 4,294,967,… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.18 |
| chmgrODescrRequestedDcpVersion The DCP version that should be used for channel established for
this connection. `any' means try with DCP3 first and revert to
DCP2 if unsuccessful because of node version mismat… | column | DcpVersion | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.19 |
| chmgrODescrType This is the unique connection type identifier that defined
the type of service that the connection description
describes.
ets(1). Ethernet Transport Service (DTM L… | column | Enumeration | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.2 |
| chmgrODescrOneHopSpareCapUtilization Specifies if the the channel shall dynamically allocate spare
capacity.
When `true', then the channel is initially established with
the acceptable capacity specifie… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20 |
| chmgrODescrCapabilities Connection capabilities that indicate which parameters that
are possible to configure in this connection description.
allowCapacityInterval(0)
Allows the configurat… | column | Bits | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.3 |
| chmgrODescrCustomerId This is a customer identifications number assigned by the
application that is providing the service on the
connection. The object has no functional use except to
provide the infor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.4 |
| chmgrODescrServiceReference This is a pointer to the application or service that owns
this connection description, and that is responsible for the
capabilities. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.5 |
| chmgrODescrAcceptableSlots The minimum capacity in number of 512 kbps DTM slots. The
value is based on the chmgrAcceptableBps and the necessary
overhead required by the service for delivering the payload
ca… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.7 |
| chmgrODescrRequestedBps The requested payload capacity in bits per second for the
service using the channel. If the requested capacity is
larger than the maximum value (4,294,967,295) bits per
second, t… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.8 |
| chmgrODescrRequestedSlots The requested capacity in number of 512 kbps DTM slots. The
value is based on the chmgrRequestedBps and the necessary
overhead required by the service for delivering the payload
c… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.9 |