agentTransferUploadUsername
NETGEAR-SWITCHING-MIB ·
.1.3.6.1.4.1.4526.10.1.2.9.1.11
Object
scalar
r/w
OctetString
Username applicable to secure upload types, i.e., SFTP or SCP and FTP.
Context
- MIB
- NETGEAR-SWITCHING-MIB
- OID
.1.3.6.1.4.1.4526.10.1.2.9.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agentTransferUploadGroup
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentTransferUploadMode Transfer upload mode configures the mode to use when uploading from the
switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is
valid only when the file transfer i… | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.1 |
| agentTransferUploadImagename Transfer upload image name. Sets the image to be uploaded as the specified
name. Imagename cannot be set to unknown(1) option. When no name is set
this object returns unknown(1) b… | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.10 |
| agentTransferUploadPassword Password applicable to secure upload types, i.e. SFTP or SCP and FTP. | scalar | OctetString | .1.3.6.1.4.1.4526.10.1.2.9.1.12 |
| agentTransferUploadRemoteFilename Transfer upload remote filename configures the file name for the file being
created remotely. It can be up to 31 alphanumeric characters.
Note: File Name, File Path, and Server IP… | scalar | OctetString | .1.3.6.1.4.1.4526.10.1.2.9.1.14 |
| agentTransferUploadSourceInterface A source-interface selection on an Interface Index (like vlan based
routing interface, port based routing interface, loopback interface,
tunnel interface). A non-zero value indica… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.10.1.2.9.1.15 |
| agentTransferUploadServicePortSrcInterface To select Service Port as a source-interface. | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.16 |
| agentTransferUploadUnitId To select unit for upload. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.1.2.9.1.17 |
| agentTransferUploadServerIP deprecated Transfer upload server IP configures the IP address of the server
where the file is located. It is valid only when the Transfer Mode is
TFTP, SFTP, or SCP. The address is 4 intege… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.10.1.2.9.1.2 |
| agentTransferUploadPath Transfer upload path configures the directory path where the file
is to be uploaded to. The switch remembers the last file path used. | scalar | OctetString | .1.3.6.1.4.1.4526.10.1.2.9.1.3 |
| agentTransferUploadFilename Transfer upload filename configures the file name for the file being
uploaded from the switch. It can be up to 31 alphanumeric characters.
The switch remembers the last file name … | scalar | OctetString | .1.3.6.1.4.1.4526.10.1.2.9.1.4 |
| agentTransferUploadDataType Transfer upload datatype configures the type of file to upload from the
switch.
The types for upload are:
- Configuration File
- Error log
- Message log… | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.5 |
| agentTransferUploadStart Transfer upload start will start an upload transfer.
The agentTransferUploadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP. | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.6 |
| agentTransferUploadStatus Indicates the current status of an upload transfer. | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.9.1.7 |
| agentTransferUploadServerAddressType The type of the serverip address, as defined in the InetAddress MIB.
The agentTransferUploadServerAddress object is intepreted within the
context of agentTransferUpload… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4526.10.1.2.9.1.8 |
| agentTransferUploadServerAddress Transfer upload serverip configures the IP address of the server
where the file is to be uploaded to.It is valid only when the
Transfer Mode is TFTP, SFTP or SCP.
The type of this… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4526.10.1.2.9.1.9 |