agentSwitchStormControlTrap
NETGEAR-SWITCHING-MIB ·
.1.3.6.1.4.1.4526.10.1.0.31
Object
notification
Trap is sent when storm control rate limit is reached.
Context
- MIB
- NETGEAR-SWITCHING-MIB
- OID
.1.3.6.1.4.1.4526.10.1.0.31- Type
- notification
- Status
- current
- Parent
- fastPathSwitchingTraps
- Siblings
- 31
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| multipleUsersTrap This trap is sent when more than one user is logged in with
administrative access. Only applies to CLI interface. | notification | - | .1.3.6.1.4.1.4526.10.1.0.1 |
| stpInstanceNewRootTrap Trap is sent when this machine is a new STP Root when there is more
than one STP instance. | notification | - | .1.3.6.1.4.1.4526.10.1.0.10 |
| stpInstanceTopologyChangeTrap Trap is sent when there is a STP topology change when there is more
than one STP instance. | notification | - | .1.3.6.1.4.1.4526.10.1.0.11 |
| powerSupplyStatusChangeTrap obsolete | notification | - | .1.3.6.1.4.1.4526.10.1.0.12 |
| failedUserLoginTrap Trap is sent when a user fails to authenticate via the CLI or Web
interfaces. | notification | - | .1.3.6.1.4.1.4526.10.1.0.13 |
| userLockoutTrap Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web
interfaces beyond the allowed limit. | notification | - | .1.3.6.1.4.1.4526.10.1.0.14 |
| daiIntfErrorDisabledTrap Trap is sent once an interface is error disabled by DAI when the
incoming packet rate exceeded configured rate limit during a
burst-interval. | notification | - | .1.3.6.1.4.1.4526.10.1.0.15 |
| stpInstanceLoopInconsistentStartTrap Trap is sent when this port in this STP instance enters
loop inconsistent state upon failure to receive a BPDU. | notification | - | .1.3.6.1.4.1.4526.10.1.0.16 |
| stpInstanceLoopInconsistentEndTrap Trap is sent when this port in this STP instance exits
loop inconsistent state upon reception of a BPDU. | notification | - | .1.3.6.1.4.1.4526.10.1.0.17 |
| dhcpSnoopingIntfErrorDisabledTrap Trap is sent once an interface is error disabled by DHCP Snooping when the
incoming packet rate exceeded configured rate limit during a
burst-interval. | notification | - | .1.3.6.1.4.1.4526.10.1.0.18 |
| noStartupConfigTrap Trap is sent when startup-config file exists and SSH is enabled. | notification | - | .1.3.6.1.4.1.4526.10.1.0.19 |
| broadcastStormStartTrap obsolete This trap is sent when a broadcast storm is detected. | notification | - | .1.3.6.1.4.1.4526.10.1.0.2 |
| agentSwitchIpAddressConflictTrap IP address conflict trap signifies the reception of an ARP from
another host in the LAN that has conflicting IP address. | notification | - | .1.3.6.1.4.1.4526.10.1.0.20 |
| agentSwitchCpuRisingThresholdTrap Trap is sent when the total CPU utilization exceeds CPU Rising
utilization threshold over the configured Rising threshold interval. | notification | - | .1.3.6.1.4.1.4526.10.1.0.21 |
| agentSwitchCpuFallingThresholdTrap Trap is sent when the total CPU utilization falls below CPU Falling
utilization threshold over the configured falling threshold interval. | notification | - | .1.3.6.1.4.1.4526.10.1.0.22 |
| agentSwitchCpuFreeMemBelowThresholdTrap Trap is sent when CPU Free Memory falls below the configured threshold. | notification | - | .1.3.6.1.4.1.4526.10.1.0.23 |
| agentSwitchCpuFreeMemAboveThresholdTrap Trap is sent when CPU Free Memory rises to 10% above the configured threshold. | notification | - | .1.3.6.1.4.1.4526.10.1.0.24 |
| topologyChangeInitiatedTrap Trap is sent once an interface gets a Topology change event
on a port. | notification | - | .1.3.6.1.4.1.4526.10.1.0.25 |
| loopDetectedTrap Trap is sent once when switch STP detects a loop | notification | - | .1.3.6.1.4.1.4526.10.1.0.26 |
| agentSwitchMbufRisingThresholdTrap Trap is sent when the Mbuf utilization exceeds Rising
utilization threshold. | notification | - | .1.3.6.1.4.1.4526.10.1.0.27 |
| agentSwitchMbufFallingThresholdTrap Trap is sent when the Mbuf utilization falls below Falling
utilization threshold. | notification | - | .1.3.6.1.4.1.4526.10.1.0.28 |
| loginSessionStartStopTrap Trap is sent when a CLI session starts or ends. | notification | - | .1.3.6.1.4.1.4526.10.1.0.29 |
| broadcastStormEndTrap obsolete This trap is sent when a broadcast storm is no longer
detected. | notification | - | .1.3.6.1.4.1.4526.10.1.0.3 |
| agentSwitchDDisableAutoRecoveryTrap Trap is sent when interface (ifIndex) is auto recovered
from agentPortDDisableReason reason. | notification | - | .1.3.6.1.4.1.4526.10.1.0.30 |
| loopProtectTrap Trap is sent on detection of loop on an interface. | notification | - | .1.3.6.1.4.1.4526.10.1.0.32 |
| linkFailureTrap obsolete | notification | - | .1.3.6.1.4.1.4526.10.1.0.4 |
| vlanRequestFailureTrap obsolete | notification | - | .1.3.6.1.4.1.4526.10.1.0.5 |
| vlanDeleteLastTrap Trap is sent when attempting to delete the last configured VLAN
or the Default VLAN. | notification | - | .1.3.6.1.4.1.4526.10.1.0.6 |
| vlanDefaultCfgFailureTrap Trap is sent if there are failures in resetting VLAN
configuration to defaults. | notification | - | .1.3.6.1.4.1.4526.10.1.0.7 |
| vlanRestoreFailureTrap obsolete | notification | - | .1.3.6.1.4.1.4526.10.1.0.8 |
| fanFailureTrap obsolete | notification | - | .1.3.6.1.4.1.4526.10.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| agentSwitchStormControlType Type of storm control.
broadcast(1) - Broadcast storm control traffic.
multicast(2) - Multicast storm control traffic.
unicast(3) - Unicast traffic resulted in destination looku… | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.8.12.16 |
| agentSwitchStormControlAction Action to be taken when storm control rate limit is reached.
shutdown(1) - Diag disable the interface on storm control.
trap(2) - Generate trap on storm control. | scalar | Enumeration | .1.3.6.1.4.1.4526.10.1.2.8.12.17 |