rlSnmpVersionSupported
NETGEAR-RADLAN-rndMng ·
.1.3.6.1.4.1.4526.17.1.4
Object
scalar
OctetString
Indicates the snmp versions that are supported by this device.
Context
- MIB
- NETGEAR-RADLAN-rndMng
- OID
.1.3.6.1.4.1.4526.17.1.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rndMng
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rndSysId Identification of an RND device. The device type for each
integer clarifies the sysObjectID in MIB - II. | scalar | Integer32 | .1.3.6.1.4.1.4526.17.1.1 |
| rlRebootDelay Setting the variable will cause the device to reboot rlRebootDelay timeticks
from the moment this variable was set.
If not set, the variable will return a value of 4294967295.
If … | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4526.17.1.10 |
| rlGroupManagement | node | - | .1.3.6.1.4.1.4526.17.1.11 |
| rlRunningCDBequalToStartupCDB Indicates whether there are changes in running CDB that were not saved in flash. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.17.1.13 |
| rlClearMib Clear MIB value for scalars or tables:
Delete all entries for tables with dynamic entries.
Set table entries default values for table with static entries.
Set scalar default value. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4526.17.1.14 |
| rlScheduledReload Used for requesting a delayed reload of the device in a
specific desired time, should be configured in one of the following formats:
'athhmmddMM' , 'inhhhmmm' or '', setting this … | scalar | OctetString | .1.3.6.1.4.1.4526.17.1.15 |
| rlScheduledReloadPendingDate Displays the most recently requested scheduled-reload due date
in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7).
if there is no pending/scheduled reload re… | scalar | OctetString | .1.3.6.1.4.1.4526.17.1.16 |
| rlScheduledReloadApprovedDate Displays the most recently approved/committed scheduled-reload date
in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7).
if there is no committed scheduled-re… | scalar | OctetString | .1.3.6.1.4.1.4526.17.1.17 |
| rlScheduledReloadCommit commits the pending scheduled-reload request, and completes the transaction.
when this value is set to TRUE, the system is instructed to perform the
requested reload operation at … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.17.1.18 |
| rlSysNameTable Holds the current system name configuration. | table | - | .1.3.6.1.4.1.4526.17.1.19 |
| rndAction This variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchang… | scalar | Enumeration | .1.3.6.1.4.1.4526.17.1.2 |
| rlErrdisableLinkFlappingCause Enable/Disable Link flapping error disable in the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.17.1.20 |
| rndFileName The name of the file used internally by RND for transferring
tables maintained by network devices, using a prorietary File
exchange protocol. | scalar | OctetString | .1.3.6.1.4.1.4526.17.1.3 |
| rlSnmpMibVersion Indicates the snmp support version that is supported by
this device. | scalar | Integer32 | .1.3.6.1.4.1.4526.17.1.5 |
| rlCpuUtilEnable Enables measurement of the device CPU utilization.
In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute
and rlCpuUtilDuringLast5Minutes, the value … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.17.1.6 |
| rlCpuUtilDuringLastSecond Percentage of the device CPU utilization during last second.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or… | scalar | Integer32 | .1.3.6.1.4.1.4526.17.1.7 |
| rlCpuUtilDuringLastMinute Percentage of the device CPU utilization during last minute.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or… | scalar | Integer32 | .1.3.6.1.4.1.4526.17.1.8 |
| rlCpuUtilDuringLast5Minutes Percentage of the device CPU utilization during the last 5 minutes.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disa… | scalar | Integer32 | .1.3.6.1.4.1.4526.17.1.9 |