rlCascadeAfterResetTable

NETGEAR-RADLAN-Physicaldescription-old-MIB · .1.3.6.1.4.1.4526.17.53.24
MIB view Table view

Object

table 
For each cascaded port for stacking unit there is an entry describing it in this table after reset

Context

MIB
NETGEAR-RADLAN-Physicaldescription-old-MIB
OID
.1.3.6.1.4.1.4526.17.53.24
Type
table
Status
current
Parent
rlPhysicalDescription
Siblings
23
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlPhdMibVersion
MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReor…
scalarInteger32.1.3.6.1.4.1.4526.17.53.1
rlPhdForceMasterUnit
Force unit to be master.
scalarInteger32.1.3.6.1.4.1.4526.17.53.10
rlPhdStackFixedUnit
Determine which unit will be on bottom/top of list on Show-List command(see .
scalarInteger32.1.3.6.1.4.1.4526.17.53.11
rlPhdStackFixedUnitLocation
Determine the bottom/top object in the stack table.
scalarEnumeration.1.3.6.1.4.1.4526.17.53.12
rlPhdStackReloadUnit
Reset a specific unit.
scalarInteger32.1.3.6.1.4.1.4526.17.53.13
rlPhdUnitGenParamTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.14
rlPhdUnitEnvParamTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.15
rlPhdStackOrderTopUnit
This scalar mib holds the Top unit for the stack order command
scalarInteger32.1.3.6.1.4.1.4526.17.53.16
rlPhdStackOrderBottomUnit
This scalar mib holds the Bottom unit for the stack order command
scalarInteger32.1.3.6.1.4.1.4526.17.53.17
rlPhdStackOrderPermutation
This scalar mib holds stack permutation
scalarOctetString.1.3.6.1.4.1.4526.17.53.18
rlPhdNumberOfPoeUnits
Shows the current number of poe units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.19
rlPhdModuleTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.2
rlPhdPoeTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.20
rlPhdPhyLedStackUnit
This scalar mib holds the unit number for the stack light command
scalarInteger32.1.3.6.1.4.1.4526.17.53.21
rlPhdPhyLedTimeout
This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state.
scalarInteger32.1.3.6.1.4.1.4526.17.53.22
rlCascadeTable
For each cascaded port for stacking unit there is an entry describing it in this table
table-.1.3.6.1.4.1.4526.17.53.23
rlPhdPortsTable
Lists the physical or physical-related attributes of ports
table-.1.3.6.1.4.1.4526.17.53.3
rlPhdStackTable
For each stack unit there is an entry describing it in this table
table-.1.3.6.1.4.1.4526.17.53.4
rlPhdModuleHotSwapTable
For each module (board) there is an entry describing its Hot Swap status
table-.1.3.6.1.4.1.4526.17.53.5
rlPhdStackOrderTable
This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If …
table-.1.3.6.1.4.1.4526.17.53.6
rlPhdStackReorder
Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further ch…
scalarEnumeration.1.3.6.1.4.1.4526.17.53.7
rlPhdNumberOfUnits
Shows the current number of units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.8
rlPhdMaxNumberOfUnits
Shows the maximum number of units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.9
Child Objects
ObjectTypeSyntaxOID
rlCascadeAfterResetEntry
A entry of this table specifies a cascaded port information in a unit after reset
row-.1.3.6.1.4.1.4526.17.53.24.1