rlPolicyClassifierOmpcList
NETGEAR-RADLAN-POLICY-MIB ·
.1.3.6.1.4.1.4526.17.59.2.4.1.5
Object
column
r/w
ObjectIdentifier
The list of OMPCs to check with this Classifier. Each subidentifier together with rlPolicyClassifierType specify one OMPC.
Context
- MIB
- NETGEAR-RADLAN-POLICY-MIB
- OID
.1.3.6.1.4.1.4526.17.59.2.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlPolicyClassifierEntry
- Table
- rlPolicyClassifierTable
- Siblings
- 16
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicyClassifierType Specifies a classifier type for which offset bytes can be specified. | column | RlPolicyGroupType | .1.3.6.1.4.1.4526.17.59.2.4.1.1 |
| rlPolicyClassifierDiffservOutIfType For a classifier used by the Diffserv Rules table. Enables
specification of a classifier that should apply to outbound
traffic on all Diffserv boundary ports or all Diffserv Inte… | column | RlPolicyClassifierDiffservIfType | .1.3.6.1.4.1.4526.17.59.2.4.1.10 |
| rlPolicyClassifierStatus The status of a table entry.
It is used to delete an entry from this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4526.17.59.2.4.1.11 |
| rlPolicyClassifierInIfIndexList allow to define list of ports for the specific classifier
for ingress classification. if rlPolicyClassifierInIfIndex equal to zero
then the following list should be reffered , if … | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.4526.17.59.2.4.1.12 |
| rlPolicyClassifierOutIfIndexList allow to define list of ports for the specific classifier
for egress classification. if rlPolicyClassifierOutIfIndex equal to zero
then the following list should be reffered , if … | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.4526.17.59.2.4.1.13 |
| rlPolicyClassifierVPTID VPT ID - user priority tag to be compared with .
8 is used to indicate not used value for this classifier | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.14 |
| rlPolicyClassifierVPTIDMask VPT ID Mask ,mask the user priority field .
0 is the default indicate Mask all compared with any VPT value | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.15 |
| rlPolicyClassifierEtherTypeID EtherType ID, to be compared with.
65535 is used to indicate not used value for this classifier
1499 is uded to indicate IPv4 ethertype that is originated from IPv4 ACL with permi… | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.16 |
| rlPolicyClassifierInnerVID INNER VLAN ID, used only for double tagged traffic. | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.17 |
| rlPolicyClassifierListIndex List Index into the Classifier Table. | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.2 |
| rlPolicyClassifierSubListIndex SubList Index into the Classifier Table. | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.3 |
| rlPolicyClassifierIndex Index into the Classifier Table. | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.4 |
| rlPolicyClassifierInIfIndex Input interface index to be compared with received packet,
a value of 0 denotes that the classifier is applied to all ports. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.17.59.2.4.1.6 |
| rlPolicyClassifierOutIfIndex Output interface index to be compared with sent packet,
a value of 0 denotes that the classifier is applied to all ports. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.17.59.2.4.1.7 |
| rlPolicyClassifierVID VLAN ID, used only for bridged traffic. | column | Integer32 | .1.3.6.1.4.1.4526.17.59.2.4.1.8 |
| rlPolicyClassifierDiffservInIfType For a classifier used by the Diffserv Rules table. Enables
specification of a classifier that should apply to all
Diffserv boundary ports or all Diffserv Interior ports.
If norma… | column | RlPolicyClassifierDiffservIfType | .1.3.6.1.4.1.4526.17.59.2.4.1.9 |