rlipv6EnabledByDefaultRemovedIfindex

NETGEAR-RADLAN-IPv6 · .1.3.6.1.4.1.4526.17.129.12
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user
on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is
that Ipv6 interface must be added.

Context

MIB
NETGEAR-RADLAN-IPv6
OID
.1.3.6.1.4.1.4526.17.129.12
Type
scalar
Access
readwrite
Status
current
Parent
rlIPv6
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlipv6IcmpErrorRatelimitInterval
The time interval between tokens being placed in the bucket, each token represents a single ICMP error message. The interval measured in milliseconds.
scalarSNMPv2-TCTimeInterval.1.3.6.1.4.1.4526.17.129.1
rlIpNetToPhysicalTableClearTable
This entity is used to clear all or specific-type entries from ipNetToPhysicalTable.
table-.1.3.6.1.4.1.4526.17.129.10
rlIpv6HostForwardingTable
This entity's IPv6 host forwarding table.
table-.1.3.6.1.4.1.4526.17.129.11
rlManagementIpv6
The system management IPv6 address which is kept between system mode changes
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4526.17.129.13
rlManagementIpv6Action
The system management IPv6 action: clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6
scalarEnumeration.1.3.6.1.4.1.4526.17.129.14
rlIpv6TunnelToIPv6DbTable
This entity's IPv6 Tunnel if/addr/prefix table.
table-.1.3.6.1.4.1.4526.17.129.15
rlIpv6DefaultTC
The default value inserted into the TC field of the IPv6 header of datagrams originated at this entity, whenever a TC value is not supplied by the application.
scalarInteger32.1.3.6.1.4.1.4526.17.129.16
rlIpv6DefaultUP
The default value inserted into the User Priority field in the 802.1q VLAN tag of IPv4 frames sent by the CPU.
scalarInteger32.1.3.6.1.4.1.4526.17.129.17
rlIpv6MtuSize
Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.129.18
rlipv6IcmpErrorRatelimitBucketSize
The maximum number of tokens stored in the bucket, each token represents a single ICMP error message.
scalarInteger32.1.3.6.1.4.1.4526.17.129.2
rlipv6LLDefaultZone
The interface which would be used as the egress interface for packets sent without a specified IPv6Z interface identifier or with the default '0' identifier. Zero value means no d…
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4526.17.129.3
rlIpv6GeneralPrefixTable
This table defines general prefix description, based on which a number of longer, more specific, prefixes can be defined.
table-.1.3.6.1.4.1.4526.17.129.4
rlipv6MaximumHopsNumber
Maximum number of hops used in router advertisements and all IPv6 packets that are originated by the router.
scalarInteger32.1.3.6.1.4.1.4526.17.129.5
rlIpv6RouterAdvertPrefixTable
This table defines IPv6 prefixes which are included in IPv6 Neighbor Discovery (ND) router advertisements.
table-.1.3.6.1.4.1.4526.17.129.6
rlIpv6RouterAdvertTable
This table is parallel to inetCidrRouteTable, and is used to configure or display additional route parameters.
table-.1.3.6.1.4.1.4526.17.129.7
rlipv6InetCidrTableClear
This scalar indicates to clear all ipv6 routes from inetCidrTable.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.17.129.8
rlIpv6PathMtuTable
This table used to represent all Path MTU changes to specific destination received from 'packet-too-big' messages.
table-.1.3.6.1.4.1.4526.17.129.9