aclRuleHitCount
NETGEAR-QOS-ACL-MIB ·
.1.3.6.1.4.1.4526.10.3.2.4.1.35
Object
column
SNMPv2-SMICounter64
Number of times the ACL rule was hit for IPv4 ACL.
Context
- MIB
- NETGEAR-QOS-ACL-MIB
- OID
.1.3.6.1.4.1.4526.10.3.2.4.1.35- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aclRuleEntry
- Table
- aclRuleTable
- Siblings
- 34
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclRuleIndex The index(sequence number) of this rule instance within an IP ACL. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.4.1.1 |
| aclRuleDestIpMask The Destination IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.10.3.2.4.1.10 |
| aclRuleDestL4Port The Destination Port (Layer 4) used in ACl classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.11 |
| aclRuleDestL4PortRangeStart The Destination Port (Layer 4) starting range used in ACL classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.12 |
| aclRuleDestL4PortRangeEnd The Destination Port (Layer 4) ending range used in ACL classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.13 |
| aclRuleIPDSCP The Differentiated Services Code Point value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.14 |
| aclRuleIpPrecedence The Type of Service (TOS) IP Precedence value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.15 |
| aclRuleIpTosBits The Type of Service (TOS) Bits value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.16 |
| aclRuleIpTosMask The Type of Service (TOS) Mask value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.17 |
| aclRuleStatus Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to del… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4526.10.3.2.4.1.18 |
| aclRuleAssignQueueId Queue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.10.3.2.4.1.19 |
| aclRuleAction The type of action this rule should perform. | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.4.1.2 |
| aclRuleRedirectIntf A non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are directed. A
value of zero means packet redirection is not in effect, whi… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.10.3.2.4.1.20 |
| aclRuleMatchEvery Flag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.4.1.21 |
| aclRuleMirrorIntf A non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
i… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.10.3.2.4.1.22 |
| aclRuleLogging Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.4.1.23 |
| aclRuleTimeRangeName Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. | column | OctetString | .1.3.6.1.4.1.4526.10.3.2.4.1.24 |
| aclRuleTimeRangeStatus Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effe… | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.4.1.25 |
| aclRuleRateLimitCrate Committed rate attribute statement value, specified in kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.10.3.2.4.1.26 |
| aclRuleRateLimitCburst Committed burst size attribute statement value, specified in kbytes. | column | AclBurstSize | .1.3.6.1.4.1.4526.10.3.2.4.1.27 |
| aclRuleIcmpType ACL rule matches on the specified ICMP type. All values
from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.4.1.29 |
| aclRuleProtocol icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.4.1.3 |
| aclRuleIcmpCode ACL rule matches on the specified ICMP code. All values
from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.4.1.30 |
| aclRuleIgmpType ACL rule matches on the specified IGMP type. All values
from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.4.1.31 |
| aclRuleEstablished Flag to indicate the ACL rule to match on TCP packets that
has either RST or ACK bits set in the TCP header | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.4.1.32 |
| aclRuleFragments Flag to indicate the ACL rule to match if the packet is fragmented | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.4.1.33 |
| aclRuleIsDuplicated Read-only object, which verifies whether the specified ACL rule is duplicated.
If the rule is duplicated then ir is recommended to remove it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.4.1.34 |
| aclRuleCounterClear Clears the counter of the specified rule within an IPv4 access list. | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.4.1.36 |
| aclRuleSrcIpAddress The Source IP Address used in the ACL Classification. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.10.3.2.4.1.4 |
| aclRuleSrcIpMask The Source IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.10.3.2.4.1.5 |
| aclRuleSrcL4Port The Source Port Number (Layer 4) used in the ACL Classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.6 |
| aclRuleSrcL4PortRangeStart The Source Port Number(Layer 4) range start. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.7 |
| aclRuleSrcL4PortRangeEnd The Source Port Number(Layer 4) range end. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.10.3.2.4.1.8 |
| aclRuleDestIpAddress The Destination IP Address used in the ACL Classification. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.10.3.2.4.1.9 |