aclMacRuleMirrorIntf
NETGEAR-QOS-ACL-MIB ·
.1.3.6.1.4.1.4526.10.3.2.7.1.21
Object
A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are copied. A value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (aclMacRuleRedirectIntf object) are mutually-exclusive rule attributes.
Context
- MIB
- NETGEAR-QOS-ACL-MIB
- OID
.1.3.6.1.4.1.4526.10.3.2.7.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclMacRuleEntry
- Table
- aclMacRuleTable
- Siblings
- 28
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclMacRuleIndex The index of this rule instance within an MAC ACL. | column | Integer32 | .1.3.6.1.4.1.4526.10.3.2.7.1.1 |
| aclMacRuleSrcMacMask The Source MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleSrcMacAddr
that is compared against a packe… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4526.10.3.2.7.1.10 |
| aclMacRuleVlanId The VLAN ID value used in the MAC ACL Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.11 |
| aclMacRuleVlanIdRangeStart The VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanIdRangeEnd
changes the VLAN ID range end to the same va… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.12 |
| aclMacRuleVlanIdRangeEnd The VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanIdRangeStart
changes the VLAN ID range start to the same val… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.13 |
| aclMacRuleVlanId2 The Secondary VLAN ID value used in the MAC ACL Classification.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag … | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.14 |
| aclMacRuleVlanId2RangeStart The Secondary VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanId2RangeEnd
changes the Secondary VLAN ID ran… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.15 |
| aclMacRuleVlanId2RangeEnd The Secondary VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanId2RangeStart
changes the Secondary VLAN ID range … | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.16 |
| aclMacRuleStatus Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to del… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4526.10.3.2.7.1.17 |
| aclMacRuleAssignQueueId Queue identifier to which all inbound packets matching this
MAC ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.18 |
| aclMacRuleRedirectIntf A non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are directed. A
value of zero means packet redirection is not in effect, … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4526.10.3.2.7.1.19 |
| aclMacRuleAction The type of action this MAC ACL rule should perform. | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.7.1.2 |
| aclMacRuleMatchEvery Flag to indicate that the MAC ACL rule is defined to match all packets,
regardless of Ethertype. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.7.1.20 |
| aclMacRuleLogging Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.7.1.22 |
| aclMacRuleTimeRangeName Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. | column | OctetString | .1.3.6.1.4.1.4526.10.3.2.7.1.23 |
| aclMacRuleTimeRangeStatus Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effe… | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.7.1.24 |
| aclMacRuleRateLimitCrate Committed rate attribute statement value, specified in kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.25 |
| aclMacRuleRateLimitCburst Committed burst size attribute statement value, specified in kbytes. | column | AclBurstSize | .1.3.6.1.4.1.4526.10.3.2.7.1.26 |
| aclMacRuleIsDuplicated Read-only object, which verifies whether the specified MAC ACL rule is duplicated.
If the rule is duplicated then ir is recommended to remove it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.3.2.7.1.28 |
| aclMacRuleHitCount Number of times the ACL rule was hit for MAC ACL. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4526.10.3.2.7.1.29 |
| aclMacRuleCos The Class of Service (COS) used in the MAC ACL Classification.
This is the three-bit user priority field in the 802.1Q tag
header of a tagged Ethernet frame. For f… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.3 |
| aclMacRuleCounterClear Clears the counter of the specified rule within a MAC access list. | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.7.1.30 |
| aclMacRuleCos2 The Secondary Class of Service (COS2) used in the MAC ACL Classification.
This is the three-bit user priority field in the second/inner 802.1Q
tag header of a doub… | column | Unsigned32 | .1.3.6.1.4.1.4526.10.3.2.7.1.4 |
| aclMacRuleDestMacAddr The Destination MAC address used in the MAC ACL Classification. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4526.10.3.2.7.1.5 |
| aclMacRuleDestMacMask The Destination MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleDestMacAddr
that is compared against a… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4526.10.3.2.7.1.6 |
| aclMacRuleEtypeKey The Ethertype keyword used in the MAC ACL Classification.
A keyword of custom(1) requires that the aclMacRuleEtypeValue
object also be set. | column | Enumeration | .1.3.6.1.4.1.4526.10.3.2.7.1.7 |
| aclMacRuleEtypeValue The Ethertype custom value used in the MAC ACL Classification.
This object is only valid if the aclMacRuleEtypeKey is set to
custom(1). The allowed value for this… | column | EtypeValue | .1.3.6.1.4.1.4526.10.3.2.7.1.8 |
| aclMacRuleSrcMacAddr The Source MAC address used in the MAC ACL Classification. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4526.10.3.2.7.1.9 |