agentStpCstExtPortPathCost

NETAPP-SWITCHING-MIB · .1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.12
MIB view Table view

Object

column r/w Unsigned32 
The MSTP external port path cost in CIST. The default value varies depending upon the link speed.

Context

MIB
NETAPP-SWITCHING-MIB
OID
.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.12
Type
column
Access
readwrite
Status
current
Parent
agentStpCstPortEntry
Table
agentStpCstPortTable
Siblings
18

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-200000000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentStpCstPortOperEdge
The MSTP operational status of a specific port for the CIST.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.1
agentStpCstDesignatedCost
The MSTP designated cost of a specific port in CIST.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.10
agentStpCstDesignatedPortId
The MSTP designated port ID of a specific port in CIST.
columnPortId.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.11
agentStpCstPortBpduGuardEffect
BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.13
agentStpCstPortBpduFilter
This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.14
agentStpCstPortBpduFlood
This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.15
agentStpCstPortAutoEdge
This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-e…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.16
agentStpCstPortRootGuard
This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.17
agentStpCstPortTCNGuard
This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. d…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.18
agentStpCstPortLoopGuard
This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guar…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.19
agentStpCstPortOperPointToPoint
The MSTP operational point to point mac of a specific port for the CIST.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.2
agentStpCstPortTopologyChangeAck
The MSTP topology change acknowledge for a specific port in the CIST.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.3
agentStpCstPortEdge
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disable…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.4
agentStpCstPortForwardingState
The MSTP forwarding state of a specific port in CIST.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.5
agentStpCstPortId
The MSTP port identifier of a specific port in CIST.
columnPortId.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.6
agentStpCstPortPathCost
The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
columnUnsigned32.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.7
agentStpCstPortPriority
The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
columnUnsigned32.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.8
agentStpCstDesignatedBridgeId
The MSTP designated bridge ID of a specific port in CIST.
columnOctetString.1.3.6.1.4.1.789.4413.1.1.1.2.15.9.1.9