aclIpv6RuleAssignQueueId

NETAPP-QOS-ACL-MIB · .1.3.6.1.4.1.789.4413.1.1.3.2.12.1.4
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
Queue identifier to which all inbound packets matching this 
ACL rule are directed.  This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the 
system:
   1-3 queues:  0
   4-7 queues:  1
     8 queues:  2
This default assignment is static and is not influenced by
other system configuration changes.

Context

MIB
NETAPP-QOS-ACL-MIB
OID
.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.4
Type
column
Access
readwrite
Status
current
Parent
aclIpv6RuleEntry
Table
aclIpv6RuleTable
Siblings
29

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aclIpv6RuleIndex
The index of this rule instance within an IPv6 ACL.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.1
aclIpv6RuleSrcL4PortRangeStart
The Source Port Number(Layer 4) range start.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.10
aclIpv6RuleSrcL4PortRangeEnd
The Source Port Number(Layer 4) range end.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.11
aclIpv6RuleDestL4Port
The Destination Port (Layer 4) used in ACl classification.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.12
aclIpv6RuleDestL4PortRangeStart
The Destination Port (Layer 4) starting range used in ACL classification.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.13
aclIpv6RuleDestL4PortRangeEnd
The Destination Port (Layer 4) ending range used in ACL classification.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.14
aclIpv6RuleStatus
Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.15
aclIpv6RuleFlowLabel
Flow label is 20-bit number that is unique to an IPv6 packet, used by end stations to signify quality-of-service handling in routers.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.16
aclIpv6RuleIPDSCP
The Differentiated Services Code Point value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.17
aclRuleSrcIpv6Prefix
The Ipv6 Prefix Address configured on the Service Port.
columnIpv6AddressPrefix.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.18
aclRuleSrcIpv6PrefixLength
The Prefix Length.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.19
aclIpv6RuleAction
The type of action this IPv6 ACL rule should perform.
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.2
aclRuleDstIpv6Prefix
The Ipv6 Prefix Address configured on the Service Port.
columnIpv6AddressPrefix.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.20
aclRuleDstIpv6PrefixLength
The Prefix Length.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.21
aclIpv6RuleTimeRangeName
Name of the time range, that the ACL rule has referenced.It must start with alphabet and shall consist of 1 to 31 alphanumeric characters.
columnOctetString.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.22
aclIpv6RuleTimeRangeStatus
Flag that indicates the ACL rule status. If the status is active, it implies that the ACL rule is in effect. If the status is inactive, it implies that the ACL rule is not in effe…
columnEnumeration.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.23
aclIpv6RuleRateLimitCrate
Committed rate attribute statement value, specified in kbps.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.24
aclIpv6RuleRateLimitCburst
Committed burst size attribute statement value, specified in kbytes.
columnAclBurstSize.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.25
aclIpv6RuleIcmpType
ACL rule matches on the specified ICMP type. All values from 1 to 255 are valid.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.27
aclIpv6RuleIcmpCode
ACL rule matches on the specified ICMP code. All values from 1 to 255 are valid.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.28
aclIpv6RuleRouting
Flag to indicate the ACL rule to match on packets with routing extention header
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.29
aclIpv6RuleLogging
Flag to indicate that the ACL rule is being logged. A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notification. …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.3
aclIpv6RuleFragments
Flag to indicate the ACL rule to match if the packets with fragments extention header
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.30
aclIpv6RuleEstablished
Flag to indicate the ACL rule to match on TCP packets that has either RST or ACK bits set in the TCP header
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.31
aclIpv6RuleRedirectIntf
A non-zero value indicates the external ifIndex to which all inbound packets matching this Ipv6 ACL rule are directed. A value of zero means packet redirection is not in effect…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.5
aclIpv6RuleMirrorIntf
A non-zero value indicates the external ifIndex to which all inbound packets matching this IPv6 ACL rule are copied. A value of zero means packet mirroring is not in effect, wh…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.6
aclIpv6RuleMatchEvery
Flag to indicate that the ACL rule is defined to match on every IP packet, regardless of content.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.7
aclIpv6RuleProtocol
icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
columnInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.8
aclIpv6RuleSrcL4Port
The Source Port Number (Layer 4) used in the ACL Classification.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.789.4413.1.1.3.2.12.1.9