nbsSlaTrafficGenFrameCount
NBS-SLA-MIB ·
.1.3.6.1.4.1.629.216.1.2.1.5
Object
column
r/w
Unsigned32
Number of frames to generate when a fixed count is desired.
Context
- MIB
- NBS-SLA-MIB
- OID
.1.3.6.1.4.1.629.216.1.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nbsSlaTrafficGenEntry
- Table
- nbsSlaTrafficGenTable
- Siblings
- 17
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967294
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSlaTrafficGenIfIndex The Mib2 ifIndex of this Traffic Generation port | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.216.1.2.1.1 |
| nbsSlaTrafficGenHeaders Specifies the 48 bytes following the first 64 bytes of generated
frames. The remainder of the frame is filled with Pattern bytes. | column | OctetString | .1.3.6.1.4.1.629.216.1.2.1.10 |
| nbsSlaTrafficGenDa Destination Address - MAC address | column | OctetString | .1.3.6.1.4.1.629.216.1.2.1.11 |
| nbsSlaTrafficGenDaType Specifies the handling of the DA in the Header bytes:
generate a random value for each frame, use the same
value for each frame, or increment the initial value
by 1 for each frame. | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.12 |
| nbsSlaTrafficGenSa Source Address - MAC address | column | OctetString | .1.3.6.1.4.1.629.216.1.2.1.13 |
| nbsSlaTrafficGenSaType Specifies the handling of the SA in the Header bytes:
generate a random value for each frame, use the same
value for each frame, or increment the initial value
by 1 for each frame. | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.14 |
| nbsSlaTrafficGenTag VLAN tag or e-type plus initial data If VLAN tagging is not
specified (i.e. Tag does not begin as 81-00), then the first
two bytes of Tag define the frame type, and the last two T… | column | OctetString | .1.3.6.1.4.1.629.216.1.2.1.15 |
| nbsSlaTrafficGenTagType Specifies the handling of the Tag in the Header bytes:
generate a random value for each frame, use the same
value for each frame, or increment the initial value
by 1 for each fram… | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.16 |
| nbsSlaTrafficGenPattern The one to four Pattern bytes are replicated as needed to fill-out
the frame to the specified size | column | OctetString | .1.3.6.1.4.1.629.216.1.2.1.17 |
| nbsSlaTrafficGenPatternType Specifies the handling of the Pattern bytes that fill-out
generated frames: generate a random value for each frame,
or use the same value for each frame. | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.18 |
| nbsSlaTrafficGenAction Different actions to activate the traffic generation. There
are three frame generation activities: specify, start, and
stop. Specifying and actually starting traffic may be done
t… | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.2 |
| nbsSlaTrafficGenFrameSize Frame Size range from 64 to 9600 | column | Integer32 | .1.3.6.1.4.1.629.216.1.2.1.3 |
| nbsSlaTrafficGenFrameSizeType Specifies the size of generated frames: random, or per
'nbsSlaTrafficGenFrameSize' bytes. The random value range is limited
by ANDing it with (the mask value) 'nbsSlaTrafficGenFra… | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.4 |
| nbsSlaTrafficGenFrameCountType Specifies how many frames to generate: a continuous stream that is
manually stopped, or a fixed count. | column | Enumeration | .1.3.6.1.4.1.629.216.1.2.1.6 |
| nbsSlaTrafficGenInterPacketGap Specifies the number of bytes between generated frames;
this determines the traffic rate. The default (1249928)
sets an approx rate of 100/10/1 fps at 1000/100/10 Mbps. | column | Integer32 | .1.3.6.1.4.1.629.216.1.2.1.7 |
| nbsSlaTrafficGenMaxHeaders Maximum number of bytes supported in nbsSlaTrafficGenHeaders;
zero if not supported | column | Integer32 | .1.3.6.1.4.1.629.216.1.2.1.8 |
| nbsSlaTrafficGenMaxPattern Maximum number of bytes supported in nbsSlaTrafficGenPattern;
zero if not supported | column | Integer32 | .1.3.6.1.4.1.629.216.1.2.1.9 |