nbsPrbsCheckPatternCaps
NBS-PRBS-MIB ·
.1.3.6.1.4.1.629.212.3.2.1.2
Object
column
OctetString
Bitmask indicating which patterns can be checked from
this port.
Bits 0 and 1 are reserved.
Subsequent bits refer to the nbsPrbsPatternTable. Bit 2
corresponds to nbsPrbsPatternIndex 2, bit 3 to
nbsPrbsPatternIndex 3, and so on.
A bit is set (1) if that pattern can be generated by this
port, cleared (0) otherwise.
OCTET STRING bitmasks count the leftmost bit (MSB) as 0.
A zero length OCTET STRING indicates that this object is not
supported.
Context
- MIB
- NBS-PRBS-MIB
- OID
.1.3.6.1.4.1.629.212.3.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nbsPrbsCheckEntry
- Table
- nbsPrbsCheckTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsPrbsCheckIfIndex The Mib2 ifIndex of this pattern checker port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.212.3.2.1.1 |
| nbsPrbsCheckUpdateFreq Indicates how frequently, in minutes, the
nbsPrbsTrapCheckerStatusUpdate Notification should be sent.
The value zero (0) disables update Notifications. | column | Integer32 | .1.3.6.1.4.1.629.212.3.2.1.10 |
| nbsPrbsCheckPatternIndex The nbsPrbsPatternIndex to check for.
When read, the value -1 indicates pattern checking is not
supported.
When read, the value 1 indicates there is … | column | Integer32 | .1.3.6.1.4.1.629.212.3.2.1.3 |
| nbsPrbsCheckDurationMax The maximum length of time, in seconds, that a bitstream
can be checked from this port.
The value 0 indicates there is no limit on the length of
time.
… | column | Integer32 | .1.3.6.1.4.1.629.212.3.2.1.4 |
| nbsPrbsCheckDuration The length of time, in seconds, to check a bitstream.
The value 0 indicates test should run until terminated
manually by user.
When read, the value -… | column | Integer32 | .1.3.6.1.4.1.629.212.3.2.1.5 |
| nbsPrbsCheckAction Used to initiate and terminate pattern checking from this
port.
If pattern checking is not available from this port, Agent
will report notSupported(1). Any SET att… | column | Enumeration | .1.3.6.1.4.1.629.212.3.2.1.6 |
| nbsPrbsCheckStatus Indicates whether this port is checking a bitstream.
If notSupported(1), this port cannot check a test
bitstream.
If idle(2), this port is currently … | column | Enumeration | .1.3.6.1.4.1.629.212.3.2.1.7 |
| nbsPrbsCheckProgress Indicates how long, in seconds, the port has been
checking a bitstream.
When nbsPrbsCheckStatus changes to idle(2), this.counter
should be cleared to zero(0) and th… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.629.212.3.2.1.8 |
| nbsPrbsCheckErrors Indicates how many errors were detected during the last
pattern checking session.
The Agent should clear this counter to zero(0) when
nbsPrbsCheckStatus changes fro… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.629.212.3.2.1.9 |