nbsSysSelftestLevel
NBASE-G1-MIB ·
.1.3.6.1.4.1.629.1.2.13
Object
scalar
mandatory
r/w
Enumeration
NVRAM based level of the system selftest.
It is supported only by the MegaSwitch II family.
The values are :
ststNone - meaning that no selftest will be executed
upon boot-up
ststShort- meaning that a short selftest, of approx 10-20
seconds will be executed upon boot-up
ststLong - meaning that a long/extensive selftest will
be executed upon boot-up
ststDiagnostics - meaning that upon boot-up the diagnostics
mode is entered. In this mode it is possible to
interactively select the test or the group of tests
that will be executed. This value may not be set through
an SNMP set command.
Context
- MIB
- NBASE-G1-MIB
- OID
.1.3.6.1.4.1.629.1.2.13- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- nbsSys
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ststNone |
2 | ststShort |
3 | ststLong |
4 | ststDiagnostics |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSysFwVers mandatory The SNMP Agent firmware version in the form Vmajor.minor | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.2.1 |
| nbsSysStpEnable mandatory Writing one of the allowed values to this object will
modify the Administrative state of the Spanning Tree.
This value will take effect in the next session after a
system reset.
… | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.10 |
| nbsSysRunStpState mandatory Running state of the Spanning Tree Engine. | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.11 |
| nbsSysFrmGen | node | - | .1.3.6.1.4.1.629.1.2.12 |
| nbsSysRomVers mandatory The SNMP Agent firmware Rom version | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.629.1.2.14 |
| nbsSysPortsNumber mandatory Number of Switching Ports provided by this system. | scalar | Integer32 | .1.3.6.1.4.1.629.1.2.2 |
| nbsSysRestart mandatory This object is used to reset the system.
Writing a coldRestart(2), causes the switching engine
as well as the SNMP Agent CPU to be hardware resetted,
similar to a power-on cycle.
… | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.3 |
| nbsSysNumRestarts mandatory Number of warmRestarts executed by the system, since the
last coldRestart or power-on cycle..
A warmRestart may be initiated by:
- writing a warmRestart value in the nbsSysRestart… | scalar | RFC1155-SMICounter | .1.3.6.1.4.1.629.1.2.4 |
| nbsSysLastError mandatory The error code of the last fatal error that generated a
warm reset. | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.5 |
| nbsSysErrUptime mandatory The time (in hundredths of a second) since the last
cold reset/power cycle when a fatal error occured.
This variable shows the system uptime from the last
cold reset/power on cycl… | scalar | RFC1155-SMITimeTicks | .1.3.6.1.4.1.629.1.2.6 |
| nbsSysSwitchDBSize mandatory The maximum size of the Switching Data Base. It indicates
how many MAC Addresses may be stored in the system
Switching Data Base. The possible values are 1024 or 2048. | scalar | Integer32 | .1.3.6.1.4.1.629.1.2.7 |
| nbsSysSetNvramDefaults mandatory Writing the value setDefaults to this objects will restore
the defaults in the NVRAM data base. These values will take
effect after a system reset | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.8 |
| nbsSysResetSwitchStats mandatory Writing the value resetStats to this object will reset all
the switching counters, for all the ports including the
the Ethernet, switching and the SNMP Agent computed
statistics | scalar | Enumeration | .1.3.6.1.4.1.629.1.2.9 |