natv2PoolThresholdUsageHigh
NATV2-MIB ·
.1.3.6.1.2.1.234.2.3.1.15
Object
column
r/w
Percent Integer32
Threshold for reporting high utilization of the address
pool. Utilization at a given instant is calculated as the
percentage of ports allocated in port map entries for the
most-used protocol at that instant. If utilization is
greater than or equal to natv2PoolThresholdUsageHigh, an
instance of natv2NotificationPoolUsageHigh may be triggered,
unless disabled by setting it to -1.
Reporting is subject to the per-pool notification interval
given by natv2PoolNotificationInterval. If multiple
notifications are triggered during one interval, the agent
MUST report only the one with the highest value of
natv2PoolNotifiedPortMapEntries and discard the others.
In the rare case where both upper and lower thresholds
are crossed in the same interval, the agent MUST report only
the upper-threshold notification.
Implementation note: the percentage specified by this object
can be converted to a number of port map entries at
configuration time (after port and address ranges have been
configured or reconfigured) and compared to the current
value of natv2PoolNotifiedPortMapEntries.
Context
- MIB
- NATV2-MIB
- OID
.1.3.6.1.2.1.234.2.3.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Percent
- Parent
- natv2PoolEntry
- Table
- natv2PoolTable
- Siblings
- 17
Syntax
Percent Integer32
Values & Constraints
Object Constraints
range: -1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| natv2PoolInstanceIndex NAT instance index. It is up to the agent implementation
to determine and operate upon only those values that
correspond to in-service NAT instances. | column | Natv2InstanceIndex | .1.3.6.1.2.1.234.2.3.1.1 |
| natv2PoolPortMapCreations The cumulative number of port map entries created in this
pool, including static mappings. Port map entries are also
tracked per instance, per protocol, and per subscriber.
… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.234.2.3.1.10 |
| natv2PoolAddressMapFailureDrops The cumulative number of packets originated by the
subscriber that were dropped because the packet would have
triggered the creation of a new address map entry, but no
address cou… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.234.2.3.1.11 |
| natv2PoolPortMapFailureDrops The cumulative number of packets dropped because the packet
would have triggered the creation of a new port map entry,
but no port could be allocated for the protocol concerned.
T… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.234.2.3.1.12 |
| natv2PoolDiscontinuityTime Snapshot of the value of the sysUpTime object at the
beginning of the latest period of continuity of the
statistical counters associated with this address
pool. This MUST be init… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.234.2.3.1.13 |
| natv2PoolThresholdUsageLow Threshold for reporting low utilization of the address pool.
Utilization at a given instant is calculated as the
percentage of ports allocated in port map entries for the
most-use… | column | Percent Integer32 | .1.3.6.1.2.1.234.2.3.1.14 |
| natv2PoolNotifiedPortMapEntries Number of port map entries using addresses and ports from
this address pool for the most-used protocol at a given
instant. One of the objects returned by
natv2NotificationPoolUsa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.234.2.3.1.16 |
| natv2PoolNotifiedPortMapProtocol The most-used protocol (i.e., with the largest number of
port map entries) mapped into this address pool at a given
instant. One of the objects returned by
natv2NotificationPoolU… | column | ProtocolNumber | .1.3.6.1.2.1.234.2.3.1.17 |
| natv2PoolNotificationInterval Minimum number of seconds between successive
notifications for this address pool. Controls the generation
of natv2NotificationPoolUsageLow and
natv2NotificationPoolUsageHigh. | column | Seconds Unsigned32 | .1.3.6.1.2.1.234.2.3.1.18 |
| natv2PoolIndex Index of an address pool that is unique for a given NAT
instance. It is up to the agent implementation to determine
and operate upon only those values that correspond to
provisio… | column | Natv2PoolIndex | .1.3.6.1.2.1.234.2.3.1.2 |
| natv2PoolRealm Address realm to which this pool's addresses belong. | column | OctetString | .1.3.6.1.2.1.234.2.3.1.3 |
| natv2PoolAddressType Address type supplied by this address pool. This will be the
same for all pools in a given realm (by definition of an
address realm). Values other than ipv4(1) or ipv6(2) would
… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.234.2.3.1.4 |
| natv2PoolMinimumPort Minimum port number of the range that can be allocated in
this pool. Applies to all protocols supported by the NAT
instance. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.234.2.3.1.5 |
| natv2PoolMaximumPort Maximum port number of the range that can be allocated in
this pool. Applies to all protocols supported by the NAT
instance. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.234.2.3.1.6 |
| natv2PoolAddressMapEntries The current number of address map entries using external
addresses drawn from this pool, including static mappings.
This definition includes 'hairpin' mappings, where the
external… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.234.2.3.1.7 |
| natv2PoolPortMapEntries The current number of entries in the port map table using
external addresses and ports drawn from this pool, including
static mappings. This definition includes 'hairpin'
mapping… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.234.2.3.1.8 |
| natv2PoolAddressMapCreations The cumulative number of address map entries created in this
pool, including static mappings. Address map entries are
also tracked per instance and per subscriber.
… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.234.2.3.1.9 |