dslChannelRemotePower

NATEKS-MIB · .1.3.6.1.4.1.4249.2.5.4.3.1.21
MIB view Table view

Object

column Enumeration 
The remote power status of the channel.
This item is not present on regenerators. On devices without remote powering capability it
is present and always shows off(2).
              
on(1) means the remote power is turned on in configuration and remote power in turned on.
              
off(2) means the remote power is turned off in configuration or remote power capability is
not present in the device.
              
alarm(3) means remote power is turned off for a certain amount of time because overcurrent
protection has triggered or AC/DC leakage threshold was met.

Context

MIB
NATEKS-MIB
OID
.1.3.6.1.4.1.4249.2.5.4.3.1.21
Type
column
Access
readonly
Status
current
Parent
dslChannelEntry
Table
dslChannelTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1on
2off
3alarm

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dslChannelId
A unique index of the DSL channel. It is constant for a given model.
columnInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.1
dslChannelLineCode
Current working line code of this channel. If the link is down, this item has notAvailable(0) value.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.10
dslChannelPSD
Current working PSD mask (annex) of this channel. If the link is down, this item has notAvailable(0) value.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.11
dslChannelBaserate
Current working base data rate (in 64kbit/s units) of this channel. If the link is down, this item has 0 value.
columnInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.12
dslChannelLineRate
Current working line rate in kbit/s of this channel. If the link is down, this item has 0 value.
columnkbps Integer32.1.3.6.1.4.1.4249.2.5.4.3.1.13
dslChannelPayloadRate
Current working payload rate in kbit/s of this channel. If the link is down, this item has 0 value.
columnkbps Integer32.1.3.6.1.4.1.4249.2.5.4.3.1.14
dslChannelNMR
Current noise margin rate for the DSL channel in dB.
columndB SNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.15
dslChannelPowerBackoff
Current power backoff of the local side of the DSL channel in dB.
columndB SNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.16
dslChannelFarEndPowerBackoff
Current far end power backoff of the DSL channel in dB.
columndB SNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.17
dslChannelLoopAttenuation
Current loop attenuation of the DSL channel in dB.
columndB SNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.18
dslChannelEOCNumber
The EOC number of the unit in this DSL link. xtuC 1 xtuR 2 repeater N=1..max N+2
columnInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.19
dslChannelIfIndex
Index in interfaces table of this DSL channel.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4249.2.5.4.3.1.2
dslChannelRegeneratorNumber
The number of regenerators in the link. This unit is not present on regenerators.
columnIntegerNumber.1.3.6.1.4.1.4249.2.5.4.3.1.20
dslChannelRemotePowerVoltage
Remote power voltage configuration for the channel. This item is not present on regenerators. On devices without remote powering capability it is present and always shows 0. If re…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.22
dslChannelMode
The activation mode of this channel: either it is Master (xU-C) or Slave (xU-R).
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.3
dslChannelStandard
The G.Shdsl mode this channel is working in.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.4
dslChannelClockReference
The G.Shdsl clock mode this channel is working in.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.5
dslChannelLineCodeConfig
The configured line code of this channel.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.6
dslChannelPSDConfig
The configured PSD mask (annex) of this channel.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.7
dslChannelBaserateConfig
The configured base data rate (in 64kbit/s units) of this channel. 0 means auto.
columnInteger32.1.3.6.1.4.1.4249.2.5.4.3.1.8
dslChannelStatus
The activation status of this DSL channel.
columnEnumeration.1.3.6.1.4.1.4249.2.5.4.3.1.9