interopReInviteForVoiceOn606NotAcceptable
MX-SIPEP-MIB ·
.0.1400.1.50000.3400
Object
ReInvite For Voice On 606 Not Acceptable
Determines the behaviour of the device when receiving a 606
Not Acceptable in response to an INVITE for T.38 fax.
* Enable: Fallback to voice is done by sending an INVITE for
voice codec negotiation. Also, fax detection is disabled
for the remainder of the call.
* Disable: The call is released.
Context
- MIB
- MX-SIPEP-MIB
- OID
.0.1400.1.50000.3400- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- interopGroup
- Siblings
- 62
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| interopOnHoldSdpStreamDirection On Hold SDP Stream Direction
Indicates the direction attribute sent in the SDP when putting
an endpoint on hold.
* Inactive: The stream is put on hold by m… | scalar | Enumeration | .0.1400.1.50000.1000 |
| interopOnHoldAnswerSdpStreamDirection On Hold Answer SDP Stream Direction
Indicates how to set the direction attribute in the SDP when
answering a hold offer with the direction attribute
'sendonly'.
… | scalar | Enumeration | .0.1400.1.50000.1025 |
| interopSdpDirectionAttributeLevel SDP Stream Direction Attribute Level
Preferred location where the stream direction attribute is
set.
* MediaOrSessionLevel: If every media have the same
… | scalar | Enumeration | .0.1400.1.50000.1050 |
| interopLocalRingOnProvisionalResponse Local Ring on Provisional Response
Specifies if the local ring should be started upon receiving a
'18x Provisional' response without SDP.
* Disable: The lo… | scalar | Enumeration | .0.1400.1.50000.1100 |
| interopSdpOriginLineSessionIdAndVersionMaxLength SDP Origin Line Session ID and Version Max Length
The maximum length of the session ID and the session version
number in the origin line (o=) of the SDP.
*… | scalar | Enumeration | .0.1400.1.50000.1200 |
| interopLockDnsSrvRecordPerCallEnable Enable/Disable Lock DNS SRV Record Per Call
Configures the behaviour of the DNS SRV feature.
* Disable: The behaviour follows RFC 3263.
* Enable: All mes… | scalar | MX-TCMxEnableState | .0.1400.1.50000.1400 |
| interopRejectCodeForUnsupportedSdpOffer Reject Code For Unsupported SDP Offer
Configures the rejection code used when an offer is received
with invalid or unsupported SDP Offer.
* UnsupportedMedi… | scalar | Enumeration | .0.1400.1.50000.1750 |
| interopUseDtmfPayloadTypeFoundInAnswer Enable/Disable Use DTMF Payload Type Found In Answer
The default behaviour when sending an initial offer that
contains an RFC 2833 payload type is to keep using that
pa… | scalar | MX-TCMxEnableState | .0.1400.1.50000.2200 |
| interopRegisterHomeDomainOverride Register Home Domain Override
Home domain override configuration. If not empty, the address
of record in the register uses this string instead of the home
domain proxy … | scalar | OctetString | .0.1400.1.50000.2400 |
| interopEnforceOfferAnswerModel Enforce Offer Answer Model
Determines whether or not the unit requires strict adherence
to RFC 3264 when receiving an answer from the peer when
negotiating capabilities… | scalar | MX-TCMxEnableState | .0.1400.1.50000.2600 |
| interopMapPlusToTonInternational Map Plus To TON International
When enabled, the service has the following behaviour:
* For a call to SIP, prefixes the username with '+' if the
call ha… | scalar | MX-TCMxEnableState | .0.1400.1.50000.2700 |
| interopAllowLessMediaInResponse Allow Less Media In Response
Determines the behaviour of the device when receiving less
medias announcement in the response than in the offer.
* Enable: Tr… | scalar | MX-TCMxEnableState | .0.1400.1.50000.2800 |
| interopDefaultUsernameValue Default Username Value
Determines the username to use when the username is empty or
undefined.
* Anonymous: Set the username to 'anonymous'.
* Host: Set … | scalar | Enumeration | .0.1400.1.50000.3000 |
| interopCallWaitingSipInfoPrivateNumberCriteria Call Waiting Private Number Criteria for SIP INFO
Specify the call waiting criteria, in the form of a regular
expression, that defines a private number received in a SI… | scalar | OctetString | .0.1400.1.50000.3250 |
| interopSdpT38ParametersEncoding T.38 Capabilities Format
Determines the format in which the unit's T.38 capabilities
are advertised. This format is used in the SDP portion of SIP
packets.
… | scalar | Enumeration | .0.1400.1.50000.3300 |
| interopAllowMultipleActiveMediaInAnswer Allow Multiple Active Media In Answer
Determines the behaviour of the device when answering a
request offering more than one active media.
* Enable: Each m… | scalar | MX-TCMxEnableState | .0.1400.1.50000.3500 |
| interopIgnoreSipOptionsOnNoUsuableEndpoints Ignore SIP OPTIONS On No Usable Endpoints
Determines whether or not the SIP OPTIONS requests should be
ignored when all endpoints are unusable.
Enable: The u… | scalar | MX-TCMxEnableState | .0.1400.1.50000.3550 |
| interopSipOptionsMethodSupport SIP OPTIONS Method Support
Determines the behaviour of the device when answering a SIP
OPTIONS request.
* None: The unit responds with an error 405 Method … | scalar | Enumeration | .0.1400.1.50000.3600 |
| interopAllowMediaReactivationInAnswer Allow Media Reactivation in SDP Answer
Determines the unit behaviour when receiving a SDP answer
activating a media that had been previously deactivated in the
offer.
… | scalar | MX-TCMxEnableState | .0.1400.1.50000.3700 |
| interopAllowAudioAndImageNegotiation Allow Simultaneous Audio and Image Media Negotiation
Determines the unit behaviour when offering media or answering
to a media offer with audio and image negotiation.
… | scalar | Enumeration | .0.1400.1.50000.3800 |
| interopTransmissionTimeout Transmission Timeout
Changes the time to wait for a response or an ACK before
considering a transaction timed out. This corresponds to
timers B, F and H for all transpo… | scalar | Unsigned32 | .0.1400.1.50000.400 |
| interopEscapePoundInSipUriUsername Escape Pound in SIP URI Username
Determines whether or not the pound character (#) must be
escaped in the username part of a SIP URI.
* Enable: Pound chara… | scalar | MX-TCMxEnableState | .0.1400.1.50000.4000 |
| interopSiemensTransportHeaderEnable Add the 'x-Siemens-Call-Type' header to the SIP packets
Triggers the addition of the 'x-Siemens-Call-Type' header to
the SIP packets sent by the unit. When enabled, the… | scalar | MX-TCMxEnableState | .0.1400.1.50000.4100 |
| interopTlsClientAuthenticationEnable Request client authentication when acting as TLS server
Specifies whether mutual authentication is enforced when the
gateway is acting as a TLS server.
* E… | scalar | MX-TCMxEnableState | .0.1400.1.50000.4200 |
| interopTlsCertificateValidation Level of security used to validate the peer TLS certificate
When the unit is acting as a TLS client, this parameter
specifies which level of security is used to validat… | scalar | Enumeration | .0.1400.1.50000.4250 |
| interopIgnorePlusInUsername Ignore Plus in Username
Determines whether or not the plus character (+) is ignored
when attempting to match a challenge username with usernames
in the Authentication t… | scalar | MX-TCMxEnableState | .0.1400.1.50000.4300 |
| interopTcpConnectTimeout TCP Connect Timeout
Defines the maximum time, in seconds, the unit should try to
establish a TCP connection to SIP hosts. This timeout value is
useful to have a faster … | scalar | Unsigned32 | .0.1400.1.50000.450 |
| behaviorOnT38InviteNotAcceptedTable Behaviour On T.38 Invite Not Accepted
This table defines the device behaviour after receiving an
error to a SIP INVITE for T.38 fax. | table | - | .0.1400.1.50000.4600 |
| interopBehaviorOnMachineDetection Behaviour On Machine Detection
Specifies the SIP device behaviour when a machine is detected
during a call.
* ReInviteOnFaxT38Only: A SIP re-INVITE is sent… | scalar | Enumeration | .0.1400.1.50000.4650 |
| interopCodecVsBearerCapabilitiesMappingPreferredCodecChoice Codec vs Beareer Capabilities Mapping Preferred Codec Choice
Configures the behaviour of the
CodecVsBearerCapabilitiesMapping table by modifying the
selection of the pr… | scalar | Enumeration | .0.1400.1.50000.4700 |
| interopSipUriUserParameterValue SIP URI User Parameter Value
Determines the value of the user parameter in SIP URIs sent by
the unit. If empty, the parameter is not added.
ex: 'sip:1234@dom… | scalar | OctetString | .0.1400.1.50000.4800 |
| interopListenForEarlyRtpEnable Listen for early RTP
Listen for RTP even before the reception of a response with
SDP.
* Enable: The RTP port is opened after the initial INVITE
has bee… | scalar | MX-TCMxEnableState | .0.1400.1.50000.4900 |
| interopRegistrationContactMatching Registration Contact Matching
Configures the matching behaviour for the contact header
received in positive responses to REGISTER requests sent by
the unit.
… | scalar | Enumeration | .0.1400.1.50000.5000 |
| interopDtmfGroup | node | - | .0.1400.1.50000.50000 |
| interopResolveRouteHeaderEnable Interop Resolve Route Header
Allows the resolution of the FQDN in the top-most route header
of outgoing packets.
* Enable: The FQDN in the top-most route h… | scalar | MX-TCMxEnableState | .0.1400.1.50000.5100 |
| interopForceDnsNaptrInTls Force DNS NAPTR In TLS
Force DNS NAPTR request when SIP transport is TLS.
* Enable: A DNS NAPTR request is sent to obtain the DNS
record associated wit… | scalar | MX-TCMxEnableState | .0.1400.1.50000.5200 |
| interopAckBranchMatching ACK Branch Matching
Configures the method used to match incoming ACK SIP packets.
* Rfc3261: Follow the method described in RFC 3261 (section
8.1.1.7).… | scalar | Enumeration | .0.1400.1.50000.5300 |
| interopIgnoreRequireHeaderEnable Ignore Require Header
Indicates if the Require Header must be ignored when
processing the incoming SIP Client requests (Invite,
re-Invite, Bye, etc.).
* En… | scalar | MX-TCMxEnableState | .0.1400.1.50000.5400 |
| interopUaHeaderFormat User-Agent Header Format
The text to display in the User-Agent Header. Macros can be
used to include information specific to the unit.
The supported macros a… | scalar | OctetString | .0.1400.1.50000.5500 |
| interopSipInfoWithoutContentAnswer SIP INFO Without Content Answer
Determines the response of the device to a received SIP INFO
with no message body for an existing call.
* UnsupportedMediaT… | scalar | Enumeration | .0.1400.1.50000.5600 |
| interopRegistrationDelayValue Registration Delay Value
The maximum number of seconds that the system uses to apply a
random algorithm, which is used to determine a delay before
requesting a user reg… | scalar | Unsigned32 | .0.1400.1.50000.5700 |
| interopUnsupportedContentType Unsupported Content-Type
Determines the behaviour of the device upon reception of a SIP
packet containing multiple unsupported Content-Type in the
payload.
… | scalar | Enumeration | .0.1400.1.50000.5800 |
| interopWaitConfirmedDialogForBlindTransfer obsolete Wait for Confirmed Dialog in Blind Transfers
This parameter is obsolete and has been replaced by the
TransferGroup.BlindTransferMethod parameter. | scalar | MX-TCMxEnableState | .0.1400.1.50000.5900 |
| interopSymmetricUdpSourcePortEnable Enable/Disable Symmetric UDP Source Port
Indicates whether the unit always uses the same local port
when sending SIP traffic over UDP.
Symmetric UDP ports ar… | scalar | MX-TCMxEnableState | .0.1400.1.50000.600 |
| interopPendingBlindTransferTimeout Maximum Waiting Time for a Pending Blind Transfer
The maximum number of seconds that the system keeps a blind
transfer pending (waiting for a 200 OK response) when the
… | scalar | Unsigned32 | .0.1400.1.50000.6000 |
| interopForkedProvisionalResponsesBehavior Forked Provisional Reponses Behaviour
Configure the unit's behaviour when receiving forked
provisional answers.
* InterpretFirst: Only the first provisiona… | scalar | Enumeration | .0.1400.1.50000.6100 |
| interopReliableForkedProvisionalResponsesBehavior Reliable Forked Provisional Reponses Behaviour
Configure the unit's behaviour when receiving reliable forked
provisional answers.
* InterpretFirst: Only th… | scalar | Enumeration | .0.1400.1.50000.6110 |
| interopSipContactDisplayNamePresence Interop SIP Contact Display Name Presence
Determines if the display name appears in the SIP Contact
header sent by the unit.
* Enable : The display name pa… | scalar | MX-TCMxEnableState | .0.1400.1.50000.6200 |
| interopEscapeFormat Interop Escaped Display Format
Configures the format of the escaped characters in all SIP
header.
* LowercaseHex: Escaped characters are displayed in a
… | scalar | Enumeration | .0.1400.1.50000.6300 |
| interopKeepAliveOptionFormat Interop Keep-Alive Option Format
Configures the Keep-Alive OPTION requests format.
* ShortFrom : The unit sends the OPTION request with the
standard fo… | scalar | Enumeration | .0.1400.1.50000.6400 |
| interopInfoDtmfRelayFlashEvent Interop Info Dtmf Relay Flash Event
This parameter specifies which SIP INFO event triggers a hook
flash on the PSTN interface when the DTMF transport method is
set to I… | scalar | Enumeration | .0.1400.1.50000.6500 |
| interopSdpPTimeAttribute Interop SDP Ptime Attribute
This parameter specifies what value must be put in the ptime
attribute of the SDP offers.
* Disabled: No ptime attribute is ins… | scalar | Enumeration | .0.1400.1.50000.6600 |
| interopSdpPTimeAttributeValue Interop SDP Ptime Attribute Value
This parameter specifies the configurable value to be put in
the ptime attribute of the SDP offers when the
InteropSdpPTimeAttribute p… | scalar | Unsigned32 | .0.1400.1.50000.6700 |
| interopIncrementSdpVersionWhenModified Interop Increment SDP Version When Modified
This parameter specifies if the SDP must be checked for
differences before updating its version.
* Disable: The… | scalar | MX-TCMxEnableState | .0.1400.1.50000.6800 |
| interopMaxForwardsValue Max Forwards Value
Sets the value used in the Max-Forwards header, in conformance
with RFC 3261. | scalar | Integer32 | .0.1400.1.50000.700 |
| interopActivateEarlyMediaOnProvisionalResponseAck Interop Activate Early Media On Provisional Response
Acknowledgement (PRACK)
This parameter specifies if the system must wait for a
provisional response acknowledgement… | scalar | MX-TCMxEnableState | .0.1400.1.50000.7000 |
| interopSend183WithSdpBefore180WithoutSdp Send 183 With SDP Before Sending 180 Witout SDP
This parameter specifies if the system must send a 183 with
SDP before sending a 180 without SDP.
* Disable… | scalar | MX-TCMxEnableState | .0.1400.1.50000.7100 |
| interopCollectCallProprietaryHeader Collect Call Proprietary Header
Defines how the reception of a collect call, also known as
'reverse charging' call, is handled:
* Ignore: Ignore the 'Colle… | scalar | Enumeration | .0.1400.1.50000.7200 |
| interopSendUaHeaderEnable Enable/Disable Sending of User-Agent Header
Enables/Disables sending of the SIP User-Agent header. | scalar | MX-TCMxEnableState | .0.1400.1.50000.800 |
| interopSdpDirectionAttributeEnable Enable/Disable SDP Direction Attribute
Indicates if the SDP direction attribute is supported by the
unit.
This parameter is used only when the negotiated med… | scalar | MX-TCMxEnableState | .0.1400.1.50000.900 |
| interopSdpDetectPeerDirectionAttributeSupportEnable Enable/Disable SDP Detect Peer Direction Attribute Support
Indicates if the SDP direction attribute support should be
autodetected in the SDP received from the peer.
… | scalar | MX-TCMxEnableState | .0.1400.1.50000.950 |
| interopOnHoldSdpConnectionAddress On Hold SDP Connection Address
Indicates the value of the connection address sent in the SDP
when an endpoint is on hold and no longer listening to media
packets.
… | scalar | Enumeration | .0.1400.1.50000.975 |