defaultRegistrationProposedExpirationValue
MX-SIPEP-MIB ·
.0.1400.1.800.300
Object
scalar
r/w
Unsigned32
Proposed Expiration Value In Registration
Configures the suggested expiration delay of a contact in the
SIP REGISTER.
Set the value to 0 to disable the expiration proposition.
This value does not modify the delay before a re-REGISTER. The
delay is the expires of the contact in the 200 OK response to
the REGISTER minus the value set in the
RegistrationRefreshTime parameter. If the expires of the
contact in the 200 OK response to the REGISTER is not present
or badly formatted, then the delay is the default registration
proposed expiration value minus the value set in the
RegistrationRefreshTime parameter.
See also the DefaultRegistrationRefreshTime parameter.
This value is expressed in seconds (s).
If a specific configuration is set in the
GwSpecificRegistration.ProposedExpirationValue parameter and
the GwSpecificRegistration.EnableConfig parameter is set to
'Enable', then it overrides the current default configuration.
Context
- MIB
- MX-SIPEP-MIB
- OID
.0.1400.1.800.300- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- registrationGroup
- Siblings
- 11
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| registrationDelayOnInitialRegistrationReception Registration Delay on Initial-Registration Reception
This parameter is only used when the
BehaviorOnInitialRegistrationReception parameter is configured
to a value othe… | scalar | Unsigned32 | .0.1400.1.800.1000 |
| registrationStatusTable Registration Status
This table holds a list of current registration. | table | - | .0.1400.1.800.10000 |
| defaultRegistrationRefreshTime Default Registration Refresh Time
In SIP, a registration is valid for a period of time defined
by the registrar. Once a unit is registered, the SIP protocol
requires th… | scalar | Unsigned32 | .0.1400.1.800.200 |
| defaultRegistrationExpirationValue Default Expiration Value In Registration
Configures the default registration expiration.
This value is used when the contact in a registration response
conta… | scalar | Unsigned32 | .0.1400.1.800.250 |
| defaultRegistrationRetryTime Default Registration Retry Time
Configures the interval on which a failed registration is
retried.
This parameter defines the time, relative to the failure o… | scalar | Unsigned32 | .0.1400.1.800.350 |
| defaultRegistrationUnregisteredBehavior Unregistered Behaviour
Specifies whether an endpoint should remain enabled or not
when not registered.
* Disable: When an endpoint is not registered, it is… | scalar | MX-TCMxEnableState | .0.1400.1.800.400 |
| defaultUnitRegistrationUnregisteredBehavior Unregistered Unit Behaviour
Specifies whether the SIP gateway state should be affected or
not by the unit registrations state.
* NoEffect: The unit registr… | scalar | Enumeration | .0.1400.1.800.450 |
| defaultStaticRegistrarServerHost Default Static Registrar Server Host
SIP registrar server FQDN and port.
A registrar is a server that accepts REGISTER requests and
places the information it… | scalar | MX-TC2MxIpHostNamePort | .0.1400.1.800.500 |
| gwSpecificRegistrationTable SIP Gateway Specific Proxy
A table of the registration configuration indexed by the SIP
gateway name. It is used to override the default value. | table | - | .0.1400.1.800.600 |
| unitRegistrationsTable Unit Registrations
This table holds a list of users to register. These users are
not tied to a specifiic endpoint.
Note: Endpoint related registration can be… | table | - | .0.1400.1.800.700 |
| behaviorOnInitialRegistrationReception Behaviour on Initial-Registration Reception
Configures the behaviour upon reception of a 380 or 504
carrying an XML body with a specified 'initial-registration'
action.… | scalar | Enumeration | .0.1400.1.800.900 |