natPortForwardingWanFinishPort
MX-NAT2-MIB ·
.1.3.6.1.4.1.4935.15.500.1.10.10.5.30
Object
If the redirection affects a port range, the current variable represents the last port
of the range, while the variable natPortForwardingWanStartPort represents the
first port of the range.
In the case of a single port forwarding, this variable must be the same as
natPortForwardingWanStartPort.
Context
- MIB
- MX-NAT2-MIB
- OID
.1.3.6.1.4.1.4935.15.500.1.10.10.5.30- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- natPortForwardingEntry
- Table
- natPortForwardingTable
- Siblings
- 7
Values & Constraints
Type Constraints
range: 1..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| natPortForwardingIndex Port forwarding index for this row. | column | Unsigned32 | .1.3.6.1.4.1.4935.15.500.1.10.10.5.10 |
| natPortForwardingWanStartPort The port on the unit's WAN side may be configured in two ways:
by identifying only one port or a port range. If the redirection affects only
one port, the current variable repres… | column | MX-TCMxIpPort | .1.3.6.1.4.1.4935.15.500.1.10.10.5.20 |
| natPortForwardingProtocol The protocol of the packets to forward. The specified protocol can be UDP, TCP or both.
udp : User Datagram Protocol
tcp : Transmission Control Proto… | column | Enumeration | .1.3.6.1.4.1.4935.15.500.1.10.10.5.40 |
| natPortForwardingLanAddr The new destination address on the unit's LAN side is configured by this variable. | column | MX-TCMxIpAddress | .1.3.6.1.4.1.4935.15.500.1.10.10.5.50 |
| natPortForwardingLanPort The destination port on the unit's LAN side may be configured in two ways.
First, the WAN destination port or port range remains the same on the
LAN side. For this … | column | MX-TCMxAdvancedIpPort | .1.3.6.1.4.1.4935.15.500.1.10.10.5.60 |
| natPortForwardingRuleLabel Short description of the port forwarding rule. | column | OctetString | .1.3.6.1.4.1.4935.15.500.1.10.10.5.70 |
| natPortForwardingRuleEnable Indicates if the specific port forwarding rule of a row is used or not.
This rule is enabled if the variable ipRoutingEnable is enabled and if
the variable ipRoutingMode is set to… | column | MX-TCMxEnableState | .1.3.6.1.4.1.4935.15.500.1.10.10.5.80 |