sNatRulesActivation
MX-NAT-MIB ·
.0.2275.1.700.1.200
Object
Activation
Activates this rule.
* Enable: This rule is active in the SNAT.
* Disable: This rule is not in the SNAT.
Context
- MIB
- MX-NAT-MIB
- OID
.0.2275.1.700.1.200- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sNatRulesEntry
- Table
- sNatRulesTable
- Siblings
- 11
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sNatRulesPriority Rule Priority
Unique identifier of the row in the table. | column | SNMPv2-SMIUnsigned32 | .0.2275.1.700.1.100 |
| sNatRulesDown Down
Moves the current row downside. | column | Enumeration | .0.2275.1.700.1.1000 |
| sNatRulesInsert Insert
Inserts a new row before this row. | column | Enumeration | .0.2275.1.700.1.1100 |
| sNatRulesDelete Delete
Deletes this row. | column | Enumeration | .0.2275.1.700.1.1200 |
| sNatRulesSourceAddress Source Address
Source address of the incoming packet using the following
format: address[/mask] or network interface name/.
Address can be either a n… | column | OctetString | .0.2275.1.700.1.300 |
| sNatRulesSourcePort Source Port
Source port of the incoming packet using the following format:
port[-port].
MinPort-MaxPort specifies a port range.
The de… | column | OctetString | .0.2275.1.700.1.400 |
| sNatRulesDestinationAddress Destination Address
Destination address of the incoming packet using the following
format: address[/mask] or network interface name/.
Address can be … | column | OctetString | .0.2275.1.700.1.500 |
| sNatRulesDestinationPort Destination Port
Destination port of the incoming packet using the following
format: port[-port].
MinPort-MaxPort specifies a port range.
… | column | OctetString | .0.2275.1.700.1.600 |
| sNatRulesProtocol Protocol
Protocol of the incoming packet.
The protocol can be one of the following:
* All: Match packets using any protocol.
* Tcp… | column | Enumeration | .0.2275.1.700.1.700 |
| sNatRulesNewAddress New Address
New address applied to the source of the packet using the
following syntax: address[:port].
When specifying a port number, it is mandator… | column | OctetString | .0.2275.1.700.1.800 |
| sNatRulesUp Up
Moves the current row upside. | column | Enumeration | .0.2275.1.700.1.900 |