epSpecificCodecG726r40kbpsVoiceEnable

MX-MIPT-MIB · .0.1600.1.100.500.400.800.1.300
MIB view Table view

Object

column r/w MX-TCMxEnableState 
Endpoint Specific G.726 40 Kbit/s Enable/Disable
Configuration of Voice
              
Indicates if the codec can be selected for voice
transmission. If enabled, this codec is listed as supported
for this specific endpoint. Otherwise, it is ignored.
              
  * Disable: Disable G.726 at 40 kbps.
  * Enable: Enable G.726 at 40 kbps.
              
G.726 is specified in ITU-T Recommendation G.726: 40, 32, 24,
16 kbit/s adaptive differential pulse code modulation
(ADPCM). It describes the algorithm recommended for
conversion of a single 64 kbit/s A-law or U-law PCM channel
encoded at 8000 samples/sec to and from a 40, 32, 24, or 16
kbit/s channel. The conversion is applied to the PCM stream
using an Adaptive Differential Pulse Code Modulation (ADPCM)
transcoding technique.
              
This codec uses generic voice activity detection. See the
DefaultCodecGenericVoiceActivityDetection and
EpSpecificCodec.GenericVoiceActivityDetection parameters.
              
This codec always uses the RTP transport.
              
This configuration overrides the default configuration set in
the DefaultCodecG726r40kbpsVoiceEnable parameter if the
EpSpecificCodecG726r40kbps.EnableConfig parameter is set to
'Enable'.

Context

MIB
MX-MIPT-MIB
OID
.0.1600.1.100.500.400.800.1.300
Type
column
Access
readwrite
Status
current
Parent
epSpecificCodecG726r40kbpsEntry
Table
epSpecificCodecG726r40kbpsTable
Siblings
8

Syntax

MX-TCMxEnableState
Source
MX-TCMxEnableState
Base type
Enumeration

Values & Constraints

Type Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
epSpecificCodecG726r40kbpsEpId
Endpoint Identifier String that identifies an endpoint in other tables.
columnOctetString.0.1600.1.100.500.400.800.1.100
epSpecificCodecG726r40kbpsEnableConfig
Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as define…
columnMX-TCMxEnableState.0.1600.1.100.500.400.800.1.200
epSpecificCodecG726r40kbpsVoicePriority
Endpoint Specific G.726 40 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with th…
columnUnsigned32.0.1600.1.100.500.400.800.1.400
epSpecificCodecG726r40kbpsDataEnable
Endpoint Specific G.726 40 Kbit/s Enable/Disable Configuration of Data Indicates if the codec can be selected for data transmission. If enabled, this codec is liste…
columnMX-TCMxEnableState.0.1600.1.100.500.400.800.1.500
epSpecificCodecG726r40kbpsDataPriority
Default G.726 40 Kbit/s Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest prio…
columnUnsigned32.0.1600.1.100.500.400.800.1.600
epSpecificCodecG726r40kbpsPayloadType
Endpoint Specific G.726 40 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 40 kbps for voice and …
columnUnsigned32.0.1600.1.100.500.400.800.1.700
epSpecificCodecG726r40kbpsMinPTime
Endpoint Specific G.726 40 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at…
columnUnsigned32.0.1600.1.100.500.400.800.1.800
epSpecificCodecG726r40kbpsMaxPTime
Endpoint Specific G.726 40 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at…
columnUnsigned32.0.1600.1.100.500.400.800.1.900