epSpecificCodecG726r32kbpsVoiceEnable

MX-MIPT-MIB · .0.1600.1.100.500.300.800.1.300

Object

column r/w MX-TCMxEnableState

Endpoint Specific G.726 32 Kbit/s Enable/Disable
Configuration for Voice
              
Indicates if the codec can be selected for voice
transmission. If enabled, this codec is listed as supported
for this specific endpoint. Otherwise, it is ignored.
              
  * Disable: Disable G.726 at 32 kbps.
  * Enable: Enable G.726 at 32 kbps.
              
G.726 is specified in ITU-T Recommendation G.726: 40, 32, 24,
16 kbit/s adaptive differential pulse code modulation
(ADPCM). It describes the algorithm recommended for
conversion of a single 64 kbit/s A-law or U-law PCM channel
encoded at 8000 samples/sec to and from a 40, 32, 24, or 16
kbit/s channel. The conversion is applied to the PCM stream
using an Adaptive Differential Pulse Code Modulation (ADPCM)
transcoding technique.
              
This codec uses generic voice activity detection. See the
DefaultCodecGenericVoiceActivityDetection and
EpSpecificCodec.GenericVoiceActivityDetection parameters.
              
This codec always uses the RTP transport.
              
This configuration overrides the default configuration set in
the DefaultCodecG726r32kbpsVoiceEnable parameter if the
EpSpecificCodecG726r32kbps.EnableConfig parameter is set to
'Enable'.

Context

MIB: MX-MIPT-MIB
OID: .0.1600.1.100.500.300.800.1.300
Type: column
Access: readwrite
Status: current
Parent: epSpecificCodecG726r32kbpsEntry
Table: epSpecificCodecG726r32kbpsTable
Siblings: 8

Syntax

MX-TCMxEnableState

Source: MX-TCMxEnableState
Base type: Enumeration

Values & Constraints

Type Values

`0`	disable
`1`	enable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
epSpecificCodecG726r32kbpsEpId Endpoint Identifier String that identifies an endpoint in other tables.	column	OctetString	`.0.1600.1.100.500.300.800.1.100`
epSpecificCodecG726r32kbpsEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as define…	column	MX-TCMxEnableState	`.0.1600.1.100.500.300.800.1.200`
epSpecificCodecG726r32kbpsVoicePriority Endpoint Specific G.726 32 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with th…	column	Unsigned32	`.0.1600.1.100.500.300.800.1.400`
epSpecificCodecG726r32kbpsDataEnable Endpoint Specific G.726 32 Kbit/s Enable/Disable Configuration for Data Indicates if the codec can be selected for data transmission. If enabled, this codec is list…	column	MX-TCMxEnableState	`.0.1600.1.100.500.300.800.1.500`
epSpecificCodecG726r32kbpsDataPriority Endpoint Specific G.726 32 Kbit/s Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the hi…	column	Unsigned32	`.0.1600.1.100.500.300.800.1.600`
epSpecificCodecG726r32kbpsPayloadType Endpoint Specific G.726 32 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 32 kbps for voice and …	column	Unsigned32	`.0.1600.1.100.500.300.800.1.700`
epSpecificCodecG726r32kbpsMinPTime Endpoint Specific G.726 32 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at…	column	Unsigned32	`.0.1600.1.100.500.300.800.1.800`
epSpecificCodecG726r32kbpsMaxPTime Endpoint Specific G.726 32 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at…	column	Unsigned32	`.0.1600.1.100.500.300.800.1.900`