defaultCodecG726r40kbpsVoiceEnable
MX-MIPT-MIB ·
.0.1600.1.100.500.400.100
Object
Default G.726 40 Kbit/s Enable/Disable Configuration for Voice
Indicates if the codec can be selected for voice transmission.
If enabled, this codec is listed as supported for this
specific endpoint. Otherwise, it is ignored.
* Disable: Disable G.726 at 40 kbps.
* Enable: Enable G.726 at 40 kbps.
G.726 is specified in ITU-T Recommendation G.726: 40, 32, 24,
16 kbit/s adaptive differential pulse code modulation (ADPCM).
It describes the algorithm recommended for conversion of a
single 64 kbit/s A-law or U-law PCM channel encoded at 8000
samples/sec to and from a 40, 32, 24, or 16 kbit/s channel.
The conversion is applied to the PCM stream using an Adaptive
Differential Pulse Code Modulation (ADPCM) transcoding
technique.
This codec uses generic voice activity detection. See the
DefaultCodecGenericVoiceActivityDetection and
EpSpecificCodec.GenericVoiceActivityDetection parameters.
This codec always uses the RTP transport.
If a specific value is set for the
EpSpecificCodecG726r40kbps.VoiceEnable parameter and the
EpSpecificCodecG726r40kbps.EnableConfig parameter is set to
'Enable', then the specific value will override the current
default value.
Context
- MIB
- MX-MIPT-MIB
- OID
.0.1600.1.100.500.400.100- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- codecG726r40kbpsGroup
- Siblings
- 7
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| defaultCodecG726r40kbpsVoicePriority Default G.726 40 Kbit/s Priority Configuration for Voice
Indicates the priority of this voice codec versus the other
voice codecs. The voice codec with the highest prio… | scalar | Unsigned32 | .0.1600.1.100.500.400.200 |
| defaultCodecG726r40kbpsDataEnable Default G.726 40 Kbit/s Enable/Disable Configuration for Data
Indicates if the codec can be selected for data transmission.
If enabled, this codec is listed as supporte… | scalar | MX-TCMxEnableState | .0.1600.1.100.500.400.300 |
| defaultCodecG726r40kbpsDataPriority Default G.726 40 Kbit/s Priority Configuration for Data
Indicates the priority of this data codec versus the other
data codecs. The data codec with the highest priority… | scalar | Unsigned32 | .0.1600.1.100.500.400.400 |
| defaultCodecG726r40kbpsPayloadType Default G.726 40 Kbit/s Payload Type
Setermines the actual RTP dynamic payload type used in an
initial offer when enabling G.726 at 40 kbps for voice and
data transmiss… | scalar | Unsigned32 | .0.1600.1.100.500.400.500 |
| defaultCodecG726r40kbpsMinPTime Default G.726 40 Kbit/s Minimum Packetization Period
Configuration
Lower boundary for the packetization period of the given
codec.
G.726 at 40 kbps -> (10 ms… | scalar | Unsigned32 | .0.1600.1.100.500.400.600 |
| defaultCodecG726r40kbpsMaxPTime Default G.726 40 Kbit/s Maximum Packetization Period
Configuration
Upper boundary for the packetization period of the given
codec.
G.726 at 40 kbps -> (10 ms… | scalar | Unsigned32 | .0.1600.1.100.500.400.700 |
| epSpecificCodecG726r40kbpsTable Endpoint Specific Voice Codec Configuration
Endpoint specific configuration. | table | - | .0.1600.1.100.500.400.800 |