localRulesSourceAddress
MX-LFW-MIB ·
.0.2200.1.600.1.300
Object
column
r/w
OctetString
Source Address
Source address of the incoming packet using the following
format: address[/mask] or network interface name/.
The address can either be a network IP address (using /mask) or
one of the host IP addresses.
When specifying a network interface name, it is mandatory to
use the suffix '/'. Doing so indicates that the network address
of this interface is used instead of the host address. Also, it
must match one of the values in the
networkInterfacesStatusTable.InterfaceName parameter from the
Basic Network Interface (BNI) service. Note that if the
specified network interface is disabled or removed, the rule is
automatically disabled thus removed from the firewall. When the
network interface is enabled or added back, the rule is
automatically enabled and applied in the firewall.
Mask must be a plain number specifying the number of binary 1s
at the left side of the network mask. E.g.: a mask of 24
specifies a network mask of 255.255.255.0.
Leaving the default empty string matches any address.
Context
- MIB
- MX-LFW-MIB
- OID
.0.2200.1.600.1.300- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- localRulesEntry
- Table
- localRulesTable
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-51
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| localRulesPriority Rule Priority
Unique identifier of the row in the table. | column | SNMPv2-SMIUnsigned32 | .0.2200.1.600.1.100 |
| localRulesDown Down
Moves the current row downwards. | column | Enumeration | .0.2200.1.600.1.1000 |
| localRulesInsert Insert
Inserts a new row before this row. | column | Enumeration | .0.2200.1.600.1.1100 |
| localRulesDelete Delete
Deletes this row. | column | Enumeration | .0.2200.1.600.1.1200 |
| localRulesActivation Activation
Current activation state for this rule.
* Enable: This rule is active in the firewall.
* Disable: This rule is not in the firewall. | column | MX-TCMxEnableState | .0.2200.1.600.1.200 |
| localRulesSourcePort Source Port
Source port of the incoming packet using the following format:
port[-port].
MinPort-MaxPort specifies a port range.
The de… | column | OctetString | .0.2200.1.600.1.400 |
| localRulesDestinationAddress Destination Address
Destination address of the incoming packet using the following
format: address or network interface name.
The address must be one… | column | OctetString | .0.2200.1.600.1.500 |
| localRulesDestinationPort Destination Port
Destination port of the incoming packet using the following
format: port[-port].
MinPort-MaxPort specifies a port range.
… | column | OctetString | .0.2200.1.600.1.600 |
| localRulesProtocol Protocol
Protocol of the incoming packet.
The protocol can be one of the following:
* All: Match packets using any protocols.
* Tc… | column | Enumeration | .0.2200.1.600.1.700 |
| localRulesBlacklistEnable Blacklist Enable
Indicates if blacklisting is enabled for this rule.
* Enable: When a packet establishing a connection matches
this rule, the a… | column | MX-TCMxEnableState | .0.2200.1.600.1.720 |
| localRulesRateLimitValue Rate Limit Value
Number of new connections allowed to match this rule from a
single source IP address within a certain time period. | column | Unsigned32 | .0.2200.1.600.1.750 |
| localRulesRateLimitTimePeriod Rate Limit Time Period
The time period on which to base the rate limit. This period is
expressed in seconds.
Ex.: a RateLimitValue of 10 and a RateLi… | column | Unsigned32 | .0.2200.1.600.1.780 |
| localRulesAction Action
Action taken when this rule matches a packet.
Action can be one of the following:
* Accept: Let the packet through.
* Rejec… | column | Enumeration | .0.2200.1.600.1.800 |
| localRulesUp Up
Moves the current row upwards. | column | Enumeration | .0.2200.1.600.1.900 |