signalingPropertiesStatusEarlyDisconnect
MX-CROUT-MIB ·
.0.1750.1.100.700.1.400
Object
column
MX-TCMxEnableState
Early Disconnect
Enable/Disable the early disconnect feature.
When early disconnect is enabled, the SIP BYE message is sent
upon ISDN 'Disconnect' signal reception.
When early disconnect is disabled, the SIP BYE message is
sent upon ISDN 'Call release' signal reception.
If early disconnect is enabled but no ISDN 'Disconnect'
message is received, the SIP BYE message will be sent upon
receiving an ISDN 'Call release' as if the early disconnect
was disabled.
Context
- MIB
- MX-CROUT-MIB
- OID
.0.1750.1.100.700.1.400- Type
- column
- Access
- readonly
- Status
- current
- Parent
- signalingPropertiesStatusEntry
- Table
- signalingPropertiesStatusTable
- Siblings
- 9
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| signalingPropertiesStatusIndex Row Index
Unique identifier of the row in the table. | column | SNMPv2-SMIUnsigned32 | .0.1750.1.100.700.1.100 |
| signalingPropertiesStatusSipHeadersTranslation SIP Header Translation Overrides
Name of the SIP header translation to apply to the call.
The translation modifies the SIP headers before the call is… | column | OctetString | .0.1750.1.100.700.1.1000 |
| signalingPropertiesStatusName Name
Name of the Signaling properties defined by this row. It must
be unique in the table. | column | OctetString | .0.1750.1.100.700.1.200 |
| signalingPropertiesStatusEarlyConnect Early Connect
Enable/Disable the early connect feature.
When early connect is enabled, the SIP call is connected by
sending a 200 OK message instead … | column | MX-TCMxEnableState | .0.1750.1.100.700.1.300 |
| signalingPropertiesStatusDestinationHost Destination Host
SIP message destination.
The value can be set to the '<local_ip_port>' macro to
replace the properties by the local IP address and p… | column | OctetString | .0.1750.1.100.700.1.500 |
| signalingPropertiesStatusAllow180Sdp Allow 180 with SDP
Enable/Disable the 180 with SDP allowed.
When disabled, a SIP 183 with SDP is sent instead of a 180
with SDP.
This … | column | MX-TCMxEnableState | .0.1750.1.100.700.1.600 |
| signalingPropertiesStatusAllow183NoSdp Allow 183 without SDP
Enable/Disable the 183 without SDP allowed.
When disabled, a 183 without SDP is not sent.
This does not affect t… | column | MX-TCMxEnableState | .0.1750.1.100.700.1.700 |
| signalingPropertiesStatusPrivacy Privacy
Indicates the privacy level of the call.
* Disable: No privacy is used.
* None: Use P-Asserted Identity privacy.
* Id: Use P-Preferred … | column | Enumeration | .0.1750.1.100.700.1.800 |
| signalingPropertiesStatusCallPropertiesTranslation Call Property Translations Override
Name of the call property translation to apply to the call.
The translation modifies the call properties before t… | column | OctetString | .0.1750.1.100.700.1.900 |